1.1 NIMS CNC Mill Credential and Exam Logistics

Key Takeaways

  • The NIMS CNC Mill Programming, Setup, and Operations theory exam has 82 questions and a 90-minute limit. A proctor must be on site.

  • A one-year individual test pass costs $80 and includes one retake. A two-test pass costs $110; a one-year subscription costs $125 and covers up to 10 tests.

  • NIMS Technical Work Groups set the passing score for each theory test. Questions can have different point values; divide points earned by total possible points to find the score as a proportion.

  • NIMS credentials earned on or after June 30, 2026 are valid for five years. Renew through documented industry experience or by passing the current theory exam. Credentials earned before that date do not expire.

  • For the Classic Machining Level I milling project, machine a part to the NIMS print and arrange qualified inspection. NIMS requires the performance affidavit and a passing theory result to award the credential.

Last updated: November 2026

1.1 NIMS CNC Mill Programming, Setup, and Operations

The National Institute for Metalworking Skills (NIMS) assesses both machining knowledge and shop performance. This guide covers CNC Mill Programming, Setup, and Operations, a Classic Machining Level I credential. The preparation goal is to read a drawing, plan how to make the part, write and prove out a program, and inspect the resulting work against the print.

Quick Answer: The credential requires an 82-question, 90-minute proctored online theory exam and a blueprint-based performance project with an accepted affidavit. The published price for an individual test pass is $80, with one retake included.

NIMS lists CNC Mill Operations and CNC Lathe Programming, Setup, and Operations as separate credentials. Check the name in the Testing Center before paying for a test or accepting a project assignment. The programming and setup credential covered here uses a project print. The separate CNC Mill Operations credential uses a Credentialing Achievement Record (CAR).

Theory Exam and Registration

ItemRequirement
Credentialing bodyNational Institute for Metalworking Skills (NIMS)
CredentialCNC Mill Programming, Setup, and Operations, Machining Level I
Theory exam82 questions in 90 minutes
ProctoringOn-site proctor for online testing
Passing scoreSet separately for each test by a NIMS Technical Work Group
PerformanceProject part, inspection, and performance affidavit

A registered school, employer, or other NIMS organization registers and assigns the candidate and arranges the exam and performance evaluation. NIMS requires a registered account administrator, proctor and evaluator. The proctor and evaluator must be different people. NIMS does not require a minimum age, educational degree, work hours, or a prerequisite credential. You still need access to the required equipment and people. Organization registration is required and NIMS program accreditation is optional.

The proctor is present during testing and enters the code to unlock the exam. NIMS expects a proctor who is independent of the teaching or training process and does not offer online proctoring. Coordinate arrangements with your testing organization. Check the exact credential name and the assignment in the Testing Center before your session.

Scoring by Points

Some questions are worth more points than others. NIMS calculates the percentage by dividing points earned by total points possible and multiplying by 100. Technical Work Groups set the passing score for each test. An assumed percentage or a count of correct answers cannot establish the result. In a practice set, keep track of which kind of task you miss. An offset-sign error and a misidentified tolerance zone call for different review.

Allowed Materials

NIMS permits a calculator, blank paper, and a pen or pencil. Its permitted references are Machinery's Handbook, Shop Reference for Students & Apprentices in any edition, and Haas Shop Notes. Practice finding cutting-speed and thread data in these references and writing out units as you calculate.

Fees and Retakes

NIMS eliminated its separate candidate registration charge on July 1, 2019. Its current published options are:

  • One-test pass: $80, with one retake included.
  • Two-test pass: $110, with one retake per test included.
  • One-year subscription: $125, covering up to 10 tests with multiple attempts per test.
  • Program pricing: NIMS lists a 20% discount for select programs. An eligible organization can confirm what discount applies to its purchase.

Individual passes are valid for one calendar year. An individual test pass includes one retake. The waiting period does not apply to the retake included in the individual pass. NIMS lists a 30-day lockout after two unsuccessful attempts on its compliance page and a 30-day waiting period for later subscription retakes in its retake FAQ. Confirm your next eligible attempt and any purchase requirement with your account administrator.

Performance Project

The Machining Level I performance project has no NIMS exam timer. Read the current project print before making a setup plan. Use its views, material callout, dimensions, geometric controls, and finish notes to decide what to cut and how to verify it. A dimension that passes its size limits may still fail a geometric callout. The print governs acceptance and the part must meet all its requirements.

Start by recording the drawing revision, the workholding arrangement and the proposed part zero. Check that the tools can reach the required faces without contacting the fixture. Verify the program and offsets under the shop's prove-out procedure, machine and deburr the part, then measure the features against the drawing. Keep the readings with the project records for inspection.

The older fact sheet names MET-TEC inspection and the Machining Performance Affidavit. Current NIMS guidance identifies project evaluators who work in manufacturing or instructors who hold the NIMS Quality Inspector credential. Arrange the authorized inspection with your registered organization. Have the assigned evaluator complete the required affidavit. NIMS encourages electronic submission in the Testing Center. Receiving a passing theory result and acceptance of the affidavit are both required to earn this credential. The My Credentials screen lets you check their status.

Credential Validity and Renewal

NIMS applies its five-year renewal cycle to credentials earned on or after June 30, 2026. If you earn a credential on that date, the five-year period begins then. Renew by documenting continued employment and practical experience in the relevant field during the credential period. Examples of evidence include employer verification and employment records. If you cannot document the experience, NIMS allows you to renew by passing the current theory examination. NIMS says credentials earned before June 30, 2026 do not expire.

Official References

Loading diagram...
NIMS CNC Certification Pathway
Test Your Knowledge

How many questions are on the NIMS CNC Mill Programming, Setup, and Operations online theory exam, and how long do you have?

A

60-question exam taken over 60 minutes

B

120-question exam taken over 2.5 hours

C

82-question exam taken over 90 minutes

D

100-question exam taken over 2 hours

Test Your Knowledge

Which group of competencies belongs to the NIMS CNC Mill Programming, Setup, and Operations credential?

A

CNC programming, setup, and machine operations

B

Management of shop personnel

C

Advanced CAD/CAM design

D

Manual engine lathe operation

Test Your Knowledge

A candidate has passed this credential’s online theory exam. What performance evidence must NIMS also receive?

A

The approved program and a copy of its setup sheet

B

The registration record and a shop evaluation of tool selection

C

The project log and a screenshot of the verified toolpath

D

An accepted performance affidavit for the inspected project part

Test Your Knowledge

A candidate earns this NIMS credential on June 30, 2026. What is its validity period and how can they renew it?

A

Five years, renewable only by repeating the performance project

B

Lifetime validity as a credential earned under the previous policy

C

Five years, renewable with relevant work evidence or a current theory pass

D

Five years, renewable only by taking approved continuing education courses

Sections you finish are checked off in the contents.