3.13 Bloodborne Exposure in a Machine Shop

Key Takeaways

  • OSHA coverage turns on reasonably anticipated exposure from job duties. Designated responders are different from incidental volunteers.

  • Apply universal precautions for human blood and other potentially infectious material and use the protections assigned to the actual exposure task.

  • Report a suspected exposure incident promptly so the employer can arrange the required evaluation and follow-up for a covered worker.

Last updated: November 2026

3.13 Bloodborne Exposure in a Machine Shop

Identify the role and the type of exposure

An injury from a sharp part or tool can leave blood on a work surface, chip tray or tool. The federal bloodborne pathogens standard, 29 CFR 1910.1030, applies to occupational exposure. That means contact with blood or other potentially infectious materials (OPIM), reasonably anticipated from assigned duties, through the skin, eyes, mucous membranes or a route that penetrates the skin. The employer identifies the relevant job classifications and tasks without assuming that PPE removes the exposure for this determination.

A designated first-aid employee or an assigned worker cleaning contaminated equipment may have occupational exposure. An incidental volunteer response does not by itself establish the same job-duty exposure. Call the designated responder and follow the emergency plan rather than guessing your assigned role. A shop emergency needs both a safe area and assistance to the injured person. Alert others, keep the machine in an appropriate safe state, and report any hazard that could injure the responder. If reaching the contaminated area would expose someone to unexpected motion or stored energy during servicing, use the applicable equipment safety procedure.

Use the controls in the exposure plan

For covered duties, the employer's written Exposure Control Plan includes how to identify and control the exposure and what to do after an incident. Apply universal precautions. Treat human blood and OPIM as potentially infectious even if no infection is known. If fluid types cannot be distinguished, apply universal precautions as required. An ordinary coolant spill with no blood or OPIM calls for the chemical and machine controls for that spill. It is a different premise from cleaning blood-contaminated debris.

Exposure situationApplicable control in the named role
Blood exposure through hands may reasonably occur while providing assigned first aid or handling contaminated itemsWear appropriate barrier gloves under the plan; change damaged disposable gloves as required and remove them appropriately.
A task can splash blood to the faceSelect the required face and eye protection under the plan, with appropriate masks and eye protection or shields as specified for the exposure.
A contaminated sharp could puncture a workerPrevent hand contact. For contaminated broken glass, use a mechanical pickup method. Use the designated sharps handling and containment procedure.
Blood is present on the bench and a guard or energy issue also affects accessRestrict access and arrange trained, authorized cleanup with the proper machine state and exposure controls.

Select PPE for the actual job. Protective gloves for an assigned cleanup or first-aid task do not authorize gloves near moving machinery where entanglement is a hazard. Use work practice and engineering controls, then add the needed PPE. Clean and decontaminate affected work surfaces through the designated procedure and use the appropriate containers for classified contaminated material. Ordinary housekeeping cannot substitute for the exposure plan where contamination is present.

Respond and report on the stated timeline

Assume an assigned responder is splashed in an eye while attending an injured worker. A splash to a mucous membrane is a route relevant to an exposure incident. Follow the plan for immediate washing or flushing as appropriate and prompt reporting. For a covered exposure incident, OSHA requires the employer to make confidential medical evaluation and follow-up immediately available after the report. Report the route and circumstances to the appropriate person so the exposure can be evaluated. Do not wait for symptoms or decide the source individual's status yourself.

The standard also includes preventive provisions, including training and offering hepatitis B vaccination to covered employees in accordance with paragraph (f). Vaccination status does not remove the need for exposure controls or the reporting and evaluation process. In a second scenario, blood is seen on a sharp broken part after an injury. Keep others clear and make sure an authorized worker uses the proper tools, reference to the plan, barrier protection and the assigned waste handling. Separate the ordinary chip container from contaminated debris awaiting the proper procedure. If a contaminated tool will return to service, make sure the affected area is decontaminated under the assigned procedure before it goes back into normal use.

OSHA 1910.1030, OSHA designated first-aid interpretation and OSHA exposure incident fact sheet

Test Your Knowledge

What determines whether a designated first-aid task has occupational exposure under the federal bloodborne pathogens standard?

A

Whether a worker owns personal gloves at home

B

Whether exposure is reasonably anticipated from the assigned duties

C

Whether the injured worker has already disclosed a diagnosis

D

Whether the task takes less than five minutes

Test Your Knowledge

A covered first-aid responder gets a blood splash in an eye. What response follows the stated workplace plan?

A

Wait for symptoms before reporting

B

Ask an untrained co-worker to decide the source status

C

Use the immediate flushing and reporting procedure and obtain the offered confidential evaluation

D

Only record the production interruption

Test Your Knowledge

How should an assigned responder treat human blood on a bench when infection status is unknown?

A

Apply universal precautions and follow the authorized exposure-control procedure

B

Clean it with ordinary chips because the source is unknown

C

Assume only visibly contaminated sharp objects present a hazard

D

Rely on protective gloves without controlling other routes

Test Your Knowledge

What is the appropriate response to blood-contaminated broken glass under the stated federal rule?

A

Pick it up by hand if wearing two pairs of disposable gloves

B

Use compressed air to move it into the chip bin

C

Wipe the area while the machine can restart

D

Use a mechanical pickup method and the specified containment procedure

Sections you finish are checked off in the contents.