4.2 Insert Geometry and ISO/ANSI Designations
Key Takeaways
Read the first four positions as shape, normal clearance, tolerance class and mounting or chipbreaker configuration for these common turning inserts.
Use the manufacturer’s actual dimensions for each listed ANSI and ISO designation. ISO size and thickness symbols are catalog codes, and the size basis can depend on shape.
For the listed 80° rhombic designs, a CNMG 432 offers four usable acute corners across two faces, and a CCMT 32.51 offers two on one face.
For a straight-edge turning model, the undeformed chip thickness is feed per revolution times the sine of the entering angle. The allowable feed still depends on the application.
4.2 Insert Geometry and ISO/ANSI Designations
Indexable inserts go into a pocket designed for a particular insert size, shape and seating geometry. Two inserts can share an outer shape and differ in thickness, relief, clamping hole, corner radius or chipbreaker. Match the holder part number first, then verify the insert’s application and the exact ordering suffix.
Read the core designation
ISO 1832:2017 describes the designation for common indexable inserts. U.S. catalogs may put an ANSI inch designation and an ISO designation on the same row. Use that row to compare like for like, and keep the grade and chipbreaker code with the order.
| Position | Example in CNMG 432 | What the position tells you |
|---|---|---|
| 1 | C | An 80° rhombus. D is a 55° rhombus, V is a 35° rhombus, S is square, T is triangular, W is trigon and R is round. |
| 2 | N | Zero degrees of normal clearance. C represents 7° and P represents 11° in the same system. |
| 3 | M | Tolerance class. Check the supplier table for variation in inscribed circle, thickness and corner location. A class is a set of dimensional tolerances. |
| 4 | G | Cylindrical fixing hole with chipbreaker features on both faces in this example. A different letter can indicate another fixing or chipbreaker arrangement. |
| 5 | 4 | For this ANSI part, the inscribed circle (IC) is 4/8 inch or 0.500 inch in diameter. |
| 6 | 3 | For this ANSI part, the thickness is 3/16 inch or 0.1875 inch nominal. |
| 7 | 2 | The ANSI nose radius is 2/64 inch or 0.03125 inch nominal. Catalog displays may round this value. |
The inscribed circle is the largest circle that fits inside the outline. Shape matters even with a common IC. An 80° rhombus and a 55° rhombus of the same IC need different pockets. Avoid reading every metric size as an IC value. The dimensional basis of the ISO size symbol depends on the insert shape. For example, the 12 in the ISO CNMG designation corresponds to a listed 12.7 mm IC for this insert.
| Example from supplier data | Paired ISO designation | IC | Thickness | Nose radius | Acute corners in normal service |
|---|---|---|---|---|---|
| Ingersoll CNMG 432 | CNMG 120408 | 0.500 in | 0.187 in catalog display | 0.031 in | Four across two faces |
| Ingersoll CCMT 32.51FM | CCMT 09T304FM | 0.375 in | 0.156 in | 0.016 in | Two on one face |
In the positive insert, the thickness grouping is 2.5 in the inch designation and T3 in the ISO designation. Compare that with the simple 3 thickness symbol in the CNMG. Treat the seven positions as fields, with code groups that can contain multiple characters. In this table the second C in CCMT gives positive relief, and the T identifies the insert’s fixing and chipbreaker configuration. Verify that configuration against the actual pocket and screw.
The four-corner CNMG uses the two acute 80° corners on each face. A normal holder for those corners does not present the two obtuse corners on either face. The CCMT row is single-sided and presents its two acute corners. Some specialty holders use other corners. Use the number of indexes specified for the insert and application.
Clearance, cutting rake and shape
Normal clearance is measured below the edge. It keeps the flank from rubbing the work. A holder for a zero-clearance insert seats it at an angle that provides operating relief. Rake describes the inclination of the surface over which the chip flows, viewed in the specified plane. The holder inclination, face profile and edge preparation all influence the effective cutting geometry. A negative-style insert can therefore have a chipbreaker with a local positive rake.
Freely cutting positive geometry can help reduce cutting forces on a thin wall or at a long boring-bar projection. A reinforced edge or a thicker wedge can resist edge damage in roughing conditions. A broad, supported corner can be strong, while a 35° rhombus can enter tighter profiles. Choose a nose radius that can reach the feature and suit the rig’s stiffness. A large radius changes the direction and magnitude of forces, which can be a problem on a slender part.
Entering angle and chip thickness
The entering angle is measured between the principal cutting edge and the feed direction. The lead angle in the complementary turning convention is 90° minus the entering angle. A shoulder tool can have a 90° entering angle and 0° lead. A 45° entering angle also has a 45° lead. Confirm the catalog convention before using a value.
For a straight major edge in turning, neglecting the nose radius contribution, the feed increment projected perpendicular to the edge gives the nominal undeformed thickness . With in/rev and entering angle , in. At , in. The idealized feed to recover 0.010 in of thickness at 45° is about 0.0141 in/rev. This only equates thickness in the model. It changes the chip width and loading distribution. Before changing feed, check the permitted chipbreaker range, cutting force, feature geometry and surface requirement. Shallow cuts where the nose radius dominates need the supplier’s radius-sensitive guidance.
Match the chipbreaker to the actual cut
A chipbreaker curves or deflects a flowing chip so it can break more readily. A light finishing groove can engage a thin chip at a depth and feed where a roughing groove does little. A roughing geometry can support a higher load but may be ineffective at a tiny depth. Catalog application charts show the feed and depth envelope for that particular geometry. Read suffixes using the issuing manufacturer’s chart.
For example, Ingersoll lists 0.003–0.010 in/rev and 0.020–0.098 in depth of cut for its CCMT 32.51FM geometry. A planned 0.005 in/rev feed with a 0.010 in depth is below the listed depth even though feed is within range. Check the stock allowance and choose a geometry that covers the actual finish pass. Confirm the material and grade separately. Inspect chip control, cutting edge and part finish on the proof cut.
ISCAR insert designation, Ingersoll CNMG, Ingersoll DNMG, Ingersoll CCMT FM and Sandvik external turning
For the ANSI DNMG 433 insert, what are the nominal inscribed circle, thickness and nose radius, in that order?
1/2 in, 3/16 in, 3/64 in
4 mm, 3 mm, 3 mm
1/4 in, 3/8 in, 3/32 in
1/2 in, 3/16 in, 3/32 in
How many acute corners are available on the example CNMG 432 and CCMT 32.51FM in holders for their intended 80° cutting corners?
Eight and four, respectively
Four and two, respectively
Two on both styles
Four on each face of either style
What is the nominal undeformed chip thickness at 0.010 in/rev and a 45° entering angle in the straight-edge turning model?
0.0100 in
0.0141 in
0.00707 in
0.00500 in
A thin shoulder finish requires a 0.010 in cut. The catalog lists a minimum depth of 0.020 in for the planned chipbreaker. What should you do?
Raise the speed until the insert reaches its minimum depth
Pick any chipbreaker with the same shape letter
Treat the minimum as a maximum and keep the planned insert
Check a finishing geometry whose specified depth and feed cover the pass
Sections you finish are checked off in the contents.