Skilled Trades Exam Flashcards

Covers the seven ASTM fresh-concrete field tests: C172 sampling, C143 slump, C231 & C173 air content, C138 unit weight & yield, C1064 temperature, and C31 making & curing specimens.

Covers ASTM C39 compressive, C78 flexural, C617 sulfur-mortar capping, and C1231 unbonded-cap laboratory testing of hardened concrete.

Covers GSIUR 1998, tightness testing and let-by, gas rating and gas properties, ventilation, flueing and spillage testing, combustion (CO/CO2) analysis, and GIUSP unsafe situations for Gas Safe registration.

Covers SSPC surface prep standards, ASTM D4417 surface profile, SSPC-PA 2 DFT measurement, dew point & ambient conditions, holiday detection, and coating chemistry.

Review corrosion and cathodic-protection fundamentals, test equipment, installation and field measurements, industry practice, and safety.

Covers API 570 corrosion-rate and remaining-life math, inspection intervals, damage mechanisms, welding procedure review, NDE methods, and practical piping-inspection judgment.

Covers NDT method selection (UT, RT, MT, PT, ET, VT, LT, AE, MFL), certification rules, materials and discontinuities, codes/procedures, training, and radiation safety for ASNT Level III candidates.

Flashcards for AWS CWI fundamentals, practical inspection concepts, and code application workflows, including welding symbols, discontinuities, inspection methods, metallurgy, procedure and welder qualification, safety, and measurement.

Covers cross-connection control, hydraulic principles, RP/DC/PVB/SVB assemblies, field test procedures, test equipment, troubleshooting, records, and program responsibilities.

UK certificate of competence for handling fluorinated gases on stationary RACHP equipment of any charge size: refrigeration cycle, F-Gas/ODS law, leak checking, recovery, GWP/ODP and safety.

Covers inspection, household-pest identification, integrated pest management, treatment planning, pesticide application, environmental protection, and worker safety for California Branch 2 field representatives.

Covers California DPR laws, QAL/QAC licensing, label compliance, pesticide safety, WPS, environmental protection, drift, groundwater, IPM, and calibration.

50 active-recall flashcards covering all 10 CMCI CCM exam domains: program and project management, cost, time, contract administration, quality, safety, risk, professional practice, sustainability, and technology.

Covers pool/spa water chemistry, sanitizers, water balance, filtration, circulation, chemical handling, safety, regulations, and facility operations.

Covers refrigerant regulations, recovery, recycling, reclamation, safety, and Core/Type I/II/III equipment rules.

Covers EPA Section 609 MVAC rules: ozone/GWP science, refrigerant properties, recovery/recycling/reclamation, servicing equipment standards, and safety.

Covers administration, housing enforcement, property conditions, occupancy, utilities, and life safety for the 2024 ICC Property Maintenance and Housing Inspector exam.

Covers IRC-based residential inspection: footings and foundations, floor and wall framing, roof/ceiling construction, means of egress, fire-resistant construction, and public safety code thresholds.

Covers IBC-based commercial inspection: occupancy classification, construction types, means of egress, fire-resistance-rated construction, accessibility, fire protection systems, structural references, and inspection administration.

Covers all three ICC CBO modules: Legal (MG) code enforcement and HR law, Management (MM) budgeting and personnel, and Building Codes and Standards (BC) plan review and field inspection.

Covers the ICC E1 blueprint: IRC Part VIII services, grounding/bonding, branch circuits, GFCI/AFCI protection, wiring methods, box fill, devices/lighting, and swimming pool wiring.

Covers ICC F3 administration, occupancy classification, hazardous materials MAQs, fire protection systems, and egress safety code thresholds from the 2024 IFC/IBC.

Reviews the inspection duties in the official ICC P1 outline using the 2024 International Residential Code plumbing, water-heater, fuel-gas, and related provisions.

Reviews commercial inspection duties across the 2024 International Plumbing Code (IPC): fixtures, water supply, sanitary drainage, vents, traps/interceptors, storm drainage, and water heaters.

Covers IBC/IZC-based permit administration and fees, legal aspects and records, plan review and occupancy/construction classifications, and zoning and site development for the ICC Permit Technician (Exam 14).

50 active-recall cards covering signal operations and phasing, cabinet wiring and electrical fundamentals, vehicle detection, installation and maintenance, MUTCD/NEC standards, communications, and safety for the IMSA Traffic Signal Technician Level I exam.

Covers all 10 ISA JTA domains: tree biology, pruning, tree risk, safe work practices, soils, diagnosis, construction, ID/selection, installation & urban forestry.

Open-book NEC-centered contractor/trades exam prep for ICC R17/T17/G17 and jurisdiction-approved journeyman electrician testing.

Covers KDA regulations, label compliance, pesticide safety, calibration, and environmental protection for Kansas applicators.

Covers XRF operation, ASTM paint-chip sampling, 40 CFR 745 regulations, inspection methodology, and recordkeeping for the EPA/state-authorized Lead-Based Paint Inspector discipline.

Covers LEED v4.1 BD+C prerequisites, credits, ASHRAE standards, and rating-system thresholds for the GBCI specialty exam.

Covers the current LEED v5 testing-only beta exam across LEED process, integrative planning, location, sites, water, energy, materials, and indoor environmental quality domains.

50 active-recall flashcards covering the MDAR Core exam blueprint: Massachusetts pesticide law under 333 CMR 10.00, label interpretation and signal words, applicator safety and toxicology, environmental protection, and application/calibration methods.

NEC-centered flashcards for Master Electrician exam prep covering code navigation, calculations, services, feeders, grounding and bonding, wiring methods, motors, transformers, special occupancies, supervision, and safety.

Covers MN DLI license classes, safety valves, low-water cutoffs, feedwater chemistry, combustion, and boiler operations.

Open-book contractor exam flashcards for procurement, contracting, estimating, project controls, safety, sitework, concrete, masonry, metals, wood, moisture protection, MEP, and electrical coordination.

50 active-recall cards spanning both NBE sections: Funeral Directing, Merchandising, Counseling, Legal/Regulatory, and Cemetery/Crematory topics from the Arts exam, plus Embalming, Restorative Art, Preparation of the Deceased, and Funeral Service Sciences from the Sciences exam.

Covers NC license classifications, limitations, lien law, bonds, contract law, safety codes & business finance.

Covers the four NCCCO mobile crane core domains: site evaluation, crane operations, technical knowledge and rigging, and load chart interpretation.

Covers precision measurement, machinery installation and foundations, shaft alignment methods, bearings and lubrication, pumps and mechanical seals, belt/chain/gear drives, compressors, turbines, and rigging safety.

Original NHIE flashcards covering property and building inspection, finding analysis, reporting, safety, and professional responsibilities for home inspector candidates.

Four-level NICET certification for technicians working with fire alarm system layout, installation, acceptance testing, troubleshooting, servicing, inspection, maintenance, and technical coordination.

Covers fire alarm fundamentals, initiating devices, notification appliances, control units, circuits, installation, testing, and NFPA 72 basics.

Four-level (I-IV) NICET certification for highway construction inspectors, covering plan and specification interpretation, survey/layout checks, soils and aggregate testing, PCC and HMA materials inspection, structures, work-zone safety, documentation, and project administration.

A 50-card, original active-recall set for NICET Inspection and Testing of Water-Based Systems (ITWBS) Levels I–III. It covers inspection, testing, documentation, safety, impairments, and reporting for existing water-based fire-protection systems. The cross-level allocation is editorial: NICET publishes separate level content outlines rather than one combined I–III blueprint.

Covers IPM principles, FIFRA federal pesticide law, pesticide formulations, PPE, label comprehension, environmental protection, and application equipment calibration for the EPA Core exam.

Covers FIFRA and restricted-use rules, label comprehension, signal words, PPE, the Worker Protection Standard, formulations, calibration math, IPM, drift, and groundwater protection.

Automotive Service Technician Red Seal review mapped to the current eight-activity national blueprint; 310S is Ontario's trade code.

A 50-card active-recall set aligned to the 13 Major Work Activities in the current Red Seal Occupational Standard and official Cook exam breakdown. It reviews journeyperson-level food safety, kitchen calculations, ingredient handling, cooking methods, production, and quality control without treating one province's certification or public-health rules as a national rule.

Covers ammonia (R-717) refrigeration fundamentals, the vapor-compression cycle, compressors, lubrication, evaporators/condensers, purging, and OSHA/EPA/IIAR safety compliance.

Reviews the ten electrical knowledge areas in the current Tennessee LLE outline, including services, grounding, conductors, raceways, hazardous locations, low-voltage systems, and utilization equipment.

Covers Texas pesticide laws, FIFRA, label compliance, pesticide safety, environmental protection, drift management, IPM, storage, disposal, and application calibration.

Covers gravity sewers, pipe materials, manholes, force mains, hydraulics, pump stations, CCTV inspection, I/I investigation, confined-space safety, and regulatory compliance.

Covers WPI/ABC-style wastewater treatment operator topics: treatment stages, activated sludge control, clarifiers, solids handling, lab analysis, sampling, safety, compliance, equipment, and wastewater math.

Covers distribution system components, equipment operation/maintenance, water quality monitoring and lab analysis, and safety/administrative procedures per the official WPI Need-to-Know Criteria.

Reviews the treatment, laboratory, equipment, source-water, safety, security, and administrative competencies in WPI's 2025 Class I blueprint.

Active-recall cards covering the WPI/ABC-style operator blueprint: treatment process control, laboratory analysis, equipment operation, source water, and safety/administrative procedures.