3.1 Safeguarded Safe Systems of Work
Key Takeaways
Safeguarded means every line at the site of work is blocked to normal train movements under Handbook 7.
A possession or neighbouring blockage does not by itself tell the COSS that the line and work location are protected.
Use the agreement with the signaller, protection controller, engineering supervisor or person in charge of the siding possession, as applicable, to confirm the protected line and limits.
Adjacent open lines, authorised engineering movements and traction electricity have separate risks and controls.
Understand which movements are blocked
RSSB Handbook 7 Issue 10, sections 6.2 and 6.4 defines a safeguarded site of work as one where every line at that site is blocked to normal train movements. A blocked line or a possession does not establish that all vehicles are excluded, that adjacent lines are blocked, or that traction power is isolated. An engineering movement within a possession can still affect the group. Before allowing work in an engineering supervisor’s work site, agree the safe system with the engineering supervisor under Handbook 9 and check how any movement could affect the group and the protection limits. Work on a line next to that work site needs its own check even if both lines appear inside the same possession limits.
| How a line can be considered blocked under Handbook 7 section 6.4 | Required agreement or action |
|---|---|
| The COSS blocks the line directly | Follow Handbook 8 with the signaller and record the authority on NR3180. |
| A protection controller (PC) blocks the line | Agree the safe system with the PC under Handbook 8. |
| The site is inside an engineering supervisor’s (ES) work site | Agree the arrangements with the ES under Handbook 9 or its ERTMS counterpart. |
| The site is inside an ES protection zone | Agree the safe system with the ES under Handbook 12. |
| The site is in a siding | Agree the safe system with the person in charge of the siding possession under Handbook 9 or its ERTMS counterpart. |
Confirm which line and limits each agreement covers using names or physical references the group can identify. Two groups in the same possession may have different work-site arrangements. An ES protection zone is a distinct arrangement. Under Handbook 12 Issue 11, section 11, the ES follows the published notice and obtains the zone from the signaller. Before work, the ES briefs the COSS, agrees the work limits, task and safe system, and records them on RT3199 for the COSS to sign.
Check whether the task needs a blocked line
Handbook 7 section 4 distinguishes work affecting the safety of the line from work that may be able to use another safe system. Examples that normally affect safety include changing the condition of the track, putting a hand trolley on a line, carrying heavy or awkward material across or along it, or using plant in a way that fouls the line. Apply the relevant instructions, including any applicable company instructions, before allowing such work. A warning system cannot make an obstruction safe for a train to pass. If a warning would otherwise be suitable but none is available, arrange a blocked line or another permissible safe system under the handbook.
Account for the lines still open
Check the interface with every adjacent open line that could affect the group or be affected by the work. Include the planned access route and the space used by people, materials and plant. A person within the agreed working limits may still be exposed to a train on a different line. A warden cannot make an undersized separated safe area acceptable. If the safe area or barrier does not meet the applicable rules, arrange a different protection before starting. Check the separate electrical arrangements wherever traction hazards affect the work.
Set up, test and brief the safe system before work, including the task, location and all open or blocked lines. Each person confirms understanding on RT9909. If the group can no longer be observed or protected by the arrangement, stop and move everyone to a position of safety. Recheck the actual controls before resuming.
Example: blocked Up Main and open relief line
A four-person team plans to replace a part on the Up Main. The signaller has granted a blockage for that line and the COSS has recorded the authority. The team would need to handle material on the near side of an open relief line, inside the minimum distance for a separated safe area. A warden at the boundary cannot cure that. The COSS keeps the group clear while a suitable arrangement for the open line is confirmed. If the planned task changes so the material could foul that line, check the blocked-line requirements and agree any further protection with the relevant authority. In the briefing, identify the specific limits of the work and which lines are blocked and still open. The Up Main blockage is one part of that decision.
What makes a site of work safeguarded under Handbook 7?
Every line at the site is blocked to normal train movements
The work line alone is blocked regardless of other lines at the site
Traction power has been switched off
A lookout can warn workers in time
The site is inside an engineering supervisor’s work site in a possession. What must the COSS do before relying on the worksite protection?
Rely on the possession being listed in a notice
Agree the safe system with the engineering supervisor under the applicable handbook
Treat the possession as an electrical isolation
Ask a site warden to confirm which trains will enter the worksite
One line is blocked for a group, but the open adjacent line is too close for the proposed separated arrangement. What must the COSS do?
Proceed if everyone can see the adjacent track
Use an additional site warden to reduce the required separation
Keep the group clear until a compliant safe system for the open line is arranged
Start and use the line blockage authority to cover the open line
Sections you finish are checked off in the contents.