4.3 Managing, Suspending & Giving Up Line Blockages

Key Takeaways

  • If it becomes clear the blockage cannot be given up or suspended at the planned time, tell the signaller as soon as possible, with the reason and expected time.

  • Give up or suspend a blockage under Handbook 8 using the removal and reconnection procedure for the protection that was actually applied.

  • Resuming after suspension requires a new authority number. Use a new NR3180 if the line or protection arrangements have changed.

  • A protection controller gives up a shared blockage only after every participating COSS or IWA confirms it is no longer needed.

Last updated: November 2026

Manage the blockage as a live arrangement

The Controller of Site Safety (COSS) stays with the group and checks that the safe system continues to protect it. A changed work limit, unexpected defect or delay must be dealt with before the line is given back. Use the agreed timing to plan when to stop the task and allow enough time to restore the site, move people and equipment clear, and follow the appropriate removal and reporting sequence. This is a planning estimate based on the actual work and protection. Do not use a fixed countdown to decide that a line is safe.

For example, if the plan is to give the blockage up at 04:00 and the site team has estimated 12 minutes to stop and clear the task and another eight minutes for the remaining handback steps, the calculation gives 03:40 as the latest start of those steps on these assumptions. Allow for uncertainty and reassess if anything changes. The estimate is not part of the authority and no step may begin before the relevant conditions are met.

Tell the signaller promptly if the planned time cannot be met

RSSB Handbook 8 Issue 10, section 5.2 requires you to tell the signaller as soon as you know you cannot give up or suspend the blockage on time. State both the reason and the expected time. If the signaller cannot agree to extra time and the line is safe to clear, work to the original arrangement and give it up properly. If the line cannot safely be returned, tell the signaller the true condition immediately. An approaching deadline, or a request to give up the blockage, cannot justify declaring the line safe or removing the protection people still need. Agree the handling of the situation with the signaller.

Giving up or suspending the blockage

Before giving up or suspending it, make sure any work that will continue can do so without the blockage. Get people and equipment clear of the line that is to reopen and confirm the condition of the site under your safe-work arrangements. Remove any red flag or light placed in the four-foot. Handbook 8 section 5.1 states the sequence for the protection in use.

Protection in useSequence at handback or suspension
T-COD physically placed on the line or planned detonator protectionRemove it as required under section 5.1 before telling the signaller.
Staff or token under section 2.7Return it to the signal box at either end or to the token instrument as applicable.
Remotely activated T-CODTell the signaller the blockage is no longer needed or is suspended before deactivating it.
Technician’s signalling disconnectionAfter notifying the signaller that the blockage is no longer needed or is suspended, ask the signaller to arrange reconnection by the signalling technician.
Remote signalling disconnectionAfter notifying the signaller, reconnect when the signaller tells you that you can.

When speaking to the signaller, give your name and the authority number. State whether the blockage is no longer needed or is to be suspended. Follow the communication and record requirements of the NR3180 arrangement. If the blockage later resumes, repeat the handbook instructions and record the new authority number. The same form can continue in use when the line and protection arrangements are unchanged. Use a new form when either changes.

Shared blockage under a protection controller

A protection controller (PC) is appointed where two or more COSSs or individuals working alone need a blockage at the same place and time. The PC holds NR3180, explains the arrangements to each participant and follows the COSS instructions for taking and giving up the blockage. Each COSS or IWA signs the form at the relevant stages unless an exception to signing was planned in advance and those involved know the arrangement. The PC must receive confirmation from each participant that they no longer need the blockage before giving it up.

Suppose welding, bonding and inspection teams share a night blockage. Two COSSs have confirmed their groups are clear. The inspection COSS reports a defect that makes the line unsafe and cannot yet confirm that protection is no longer needed. The PC keeps the protection in place and promptly tells the signaller the reason and expected time once an overrun is known. The first two confirmations do not cover the remaining team. When that COSS confirms the group and site arrangements no longer need the blockage, the PC follows the appropriate section 5 handback procedure.

Loading diagram...
Status Confirmation Before Giving Up a Shared Blockage
Test Your Knowledge

When may the protection controller give up a shared line blockage?

A

As soon as the first COSS reports clear

B

At the booked finish time even if a group still needs protection

C

After each participating COSS or IWA confirms that the blockage is no longer needed

D

When the next train stops at the protecting signal

Test Your Knowledge

The COSS learns that a defect means a blockage cannot safely be given up at the agreed time. What must the COSS do?

A

Wait until the end of the booked window to report the situation

B

Tell the signaller as soon as possible, giving the reason and the expected time

C

Give up the blockage on time and leave the defect for the next team

D

Remove all protection immediately if another train needs the route

Test Your Knowledge

A suspended line blockage is to resume with the same line and protection arrangements. What does the COSS need?

A

A new authority number after carrying out the blockage instructions again, recorded on the same NR3180 if appropriate

B

Only the old authority number, as the line and arrangements are unchanged

C

Only a new safe-work briefing form, without agreement with the signaller

D

An emergency call that takes the place of the authority number

Sections you finish are checked off in the contents.