7.3 Radio, Telephone & Emergency Call Protocols

Key Takeaways

  • When reporting an accident, say “This is an emergency call” first, then give your name, exact location, accident details, obstructed or possibly obstructed lines, and the emergency services needed.

  • A railway emergency group call (REC) is a GSM-R function. Do not assume it has reached a particular train or made the line safe.

  • Use a telephone marked for limited clearance only in an emergency and only when no other communication method is available.

  • When communication fails, use the available safe means to reach the right person. Continue to treat affected lines as unsafe until the appropriate arrangements are confirmed.

Last updated: November 2026

Choose the communication method from safety

When a planned task needs communication with the signaller, check how to make contact at that location and what alternative exists if the planned equipment fails. RSSB Handbook 1 Issue 9, sections 9 and 11 requires a position of safety before using mobile communications equipment. Some fixed lineside telephones are marked for limited clearance from adjacent lines. Use those telephones only in an emergency and only when there is no other form of communication available. A convenient telephone may still be unsafe to approach for a routine call.

For a routine conversation, confirm you are speaking to the right person. Give your location on phone or radio, name and employer, the task and contact details when needed. Repeat back the message and resolve discrepancies. A routine call to agree a line blockage has its own authority process. A phone conversation about intended access does not make it safe to step onto the line. Section 9.6 restricts use of group, general or conference calls outside emergencies for instructions on protecting trains, wrong-direction or unsignalled movements, or passing a signal at danger or end of authority without a movement authority.

Make the emergency clear immediately

Under Handbook 1 section 6.1, report an accident as quickly as possible to the person in charge, the signaller or Operations Control. Open with “This is an emergency call.” Give your name and exact location, what happened, which lines are or might be obstructed, and which emergency services are required. Section 8 also requires prompt reporting of hazards that might put trains in danger and any necessary action to stop them. Tell your supervisor or manager about accidents and near misses after the immediate response.

The wording at the start of an emergency report is used to signal urgency, including on an ordinary telephone. It does not activate the railway emergency group call (REC) function of GSM-R, the railway's mobile radio system. The RSSB GSM-R Handbook, RS523 Issue 2, in force from 6 December 2025, describes GSM-R call functions. Use the approved instructions for your equipment and role. Network Rail's guidance explains that during an REC the operator presses to speak and releases to listen, and starts the conversation with the emergency phrase. If an REC is activated by mistake, explain this to the signaller and do not simply switch the radio off. Network Rail GSM-R guidance.

SituationWhat to communicate or confirm
Routine requestEstablish identity, location and the task. Follow the procedure that applies to any authority needed.
Accident or obstructionFlag the emergency, identify the affected line and whether adjacent lines may be obstructed, and explain what response is needed.
First call does not connectSeek another safe means of contacting the signaller or reporting the danger promptly. Follow the appropriate emergency protection rules if trained to do so.
Contact made but status unclearClarify what action has been taken. Keep the group safe while the status of affected lines is uncertain.

Worked report: an overturned vehicle

From a position of safety, the COSS can see that a plant boom is across the Up Fast. It is unclear whether it also fouls the Down Fast. A worker is trapped. The COSS tells the signaller: “This is an emergency call. This is COSS Patel. I’m on the Up Fast at seven four miles, six zero chains near signal Delta Mike one zero eight. An overturned vehicle is blocking the Up Fast. The Down Fast may also be obstructed. Stop trains on the affected lines. A worker is trapped. Ambulance and fire and rescue are needed.”

The report makes the confirmed obstruction and the possible obstruction clear. Do not wait until you can see both lines from the same place. Give the best precise location and safety information you have, then listen and check what the signaller understood. Do not assume that a broadcast or an unanswered call has stopped trains. In the Rail Accident Investigation Branch's Bethnal Green investigation, one train did not respond during the REC after its radio had stopped working. That is why a report or radio alert cannot stand in for confirmed protection. RAIB safety digest.

Test Your Knowledge

A track worker calls the signaller by ordinary telephone about an accident affecting a running line. What is the correct way to begin and report it?

A

Give the contractor’s work order number first and discuss the location after a manager calls

B

Say “This is an emergency call”, then give your name, the exact location, relevant accident and line details, and the services required

C

Use a routine access request so that other calls are unaffected

D

Wait to report until you know with certainty whether every nearby line is clear

Test Your Knowledge

A lineside telephone is marked for limited clearance. When may a track worker use it under Handbook 1?

A

Whenever the caller wants to check a signal number

B

During any planned line blockage request

C

Only in an emergency when no other form of communication is available

D

Whenever a train has just passed the telephone

Sections you finish are checked off in the contents.