9.2 Rail Emergencies: Obstructions, Derailments, Collisions & Fire
Key Takeaways
Report an accident or a hazard affecting train safety immediately, identifying any line that is or might be obstructed.
If a train is at risk, take necessary protective action within your role. A radio report does not confirm that trains are stopped.
M/ETHANE is the shared incident format used between responders and their control rooms. It does not replace the immediate Rule Book accident report.
Keep the group clear of damaged electrical equipment and report it. Treat traction power as live until the relevant railway authority confirms the safety arrangements.
Network Rail Route Control coordinates with emergency services. The Rail Incident Officer takes on-site railway safety and responder-access responsibility on arrival.
Recognise the danger and report it
A derailment, obstruction or fire can put the workgroup and trains in danger at the same time. Get the workers clear of immediate danger and report the hazard promptly. RSSB Handbook 1 Issue 9, sections 6 and 8 instructs track workers to report accidents or hazards to the person in charge, signaller or Operations Control as appropriate, and to take any necessary action to stop trains. Do not delay a report to make every detail certain. If only one line's obstruction is confirmed and another may be affected, say so.
Open an accident report with “This is an emergency call”. Give your name, exact location, what happened, which lines are or may be obstructed and the emergency services required. Use a safe means to make contact. Chapter 7 covers phone and GSM-R communication. If emergency protection under Handbook 2 is required, it must be provided by trained personnel following the relevant procedure. Chapter 9.1 distinguishes the actions when signaller contact fails from what to do when a train approaches. A warning or an emergency call alone does not establish that a line is safe to enter.
Report secondary hazards without putting people at risk
- Damaged electrical equipment: Keep the group clear of overhead line equipment (OLE), conductor rails and anything that may be in electrical contact. Report the electrical damage and its location so the railway can arrange the appropriate response. A train being stopped does not make traction power safe, and a report that power has been switched off is not equivalent to authority to touch equipment.
- Dangerous goods: Under Handbook 1 section 6.2, report a fault involving a train carrying dangerous goods to the signaller, Operations Control or the local manager as a rail dangerous goods emergency. Include the usual accident details plus the United Nations (UN) number from the hazard panel if it is available. Keep well clear, approach no closer to read a panel, and keep unauthorised people clear. The handbook tells staff to keep the wind behind them when facing affected vehicles or packages, avoid low places where gas may collect, and avoid mobile phones near vehicles with flammable loads.
- Injuries: Report casualty numbers and condition to the extent known. Assist from safety and follow the emergency arrangements. Do not send people onto an affected line or towards damaged traction equipment simply because a casualty is visible.
Give responders information they can use
The Network Rail emergency services action cards distinguish Network Rail Route Control, which coordinates initially with emergency services control, from the Rail Incident Officer (RIO), who takes responsibility on site for railway safety and authorisation of responder access on arrival. The COSS can help by giving verified information about the location, access and hazards to those coordinating the incident. Do not use a COSS briefing as permission for responders to enter the railway.
JESIP's M/ETHANE framework structures the incident picture shared by responders and control rooms. Record whether a major incident has been declared. Below that threshold, the report is ETHANE. In either case, the fields are the exact location, type of incident, hazards, safe access, number and condition of casualties, and emergency services present or needed. The initial report may be incomplete. Update it as facts become known. A precise railway reference locates the danger for the signaller, while a separately identified road access point helps responders reach the right entrance.
Worked incident: a derailment adjacent to the work site
The COSS sees a derailed wagon leaning towards another line and a damaged overhead wire. The group stays away from the lines and wire. The COSS promptly reports the location, the known obstruction, the other line that might be affected, the electrical hazard and the known casualty. If responders ask for access details, identify the safe meeting point, share what has and has not been confirmed, and let Route Control or the RIO coordinate railway access. A radio alert does not verify that each train received it or that the damaged equipment is safe.
Keep the site documents and report factual observations to the appropriate incident lead. Avoid disturbing items unless required by an immediate safety need or by the response arrangements. For the organisations covered by the relevant regulations, preserving potential evidence is subject to provisions for saving life, preventing further injury or damage, avoiding danger and protecting the site. Railways (Accident Investigation and Reporting) Regulations 2005, regulations 8 and 9.
A collapse obstructs an open line and might also foul an adjacent line. Which action is appropriate for the COSS?
Wait for a complete inspection before making a report
Assume the neighbouring line is safe because its rails are visible
Send a worker onto the affected line to meet any approaching rescue team
Get the group clear, report the danger and both line statuses promptly, and take necessary protective action
What does the first E in the M/ETHANE incident framework mean?
Exact location of the incident
Estimated delay to trains
Electrical isolation confirmed
Emergency services already present
A derailment damages overhead line equipment and train movements have been stopped. What should the COSS do about the equipment?
Treat the wire as safe once trains have stopped
Move the wire from the approach before emergency services arrive
Keep people clear, report the damage, and follow the confirmed railway electrical safety arrangements
Allow staff to touch the wire if they cannot see sparks
Sections you finish are checked off in the contents.