16-3 Boiler and Machinery (Equipment Breakdown): Covered Equipment and Perils

Key Takeaways

  • Use the specific CP and EB exclusions and exceptions for pressure failure, arcing, mechanical failure and resulting damage.

  • Covered Equipment is the unit that must satisfy the Breakdown definition. Covered Property can include other insured items it damages.

  • Diagnostic equipment requires the named EB election. One Breakdown uses the applicable per-coverage deductibles and overall event limit.

  • Written equipment suspension and Georgia inspection or cessation orders have different legal bases.

Last updated: November 2026

Boiler and Machinery (Equipment Breakdown): Covered Equipment and Perils

An industrial fire, a failed compressor and an electrical arc can damage the same plant. Identify what failed, the order of events and the cause of damage to each item. This section compares CP 10 30 09 17, the ISO Causes of Loss – Special Form, with the base EB 00 20 01 13 Equipment Breakdown Protection form. An endorsement or different edition can change the result.

Separating property causes from a breakdown

EventCP 10 30 09 17EB 00 20 01 13
Steam boiler under the insured's control explodes from pressureB.2.e excludes the listed steam explosions. Check its exceptions for resulting fire or combustion explosion and fuel or gas explosions in the specified furnace or passage. C.1 separately limits named boiler and water-heating equipment losses.B.6 excepts specified equipment explosions, including a steam boiler and certain rotating equipment, if no other exclusion applies. The failure must still qualify.
Arcing damages a panel, then a fire damages wallsB.2.a excludes the electrical-energy damage and can cover damage separately caused by resulting fire.The arcing can qualify as an electrical failure. B.7 excludes fire or combustion explosion, whether it causes, coincides with or ensues from a Breakdown.
Centrifugal force tears a rotor apartMechanical breakdown is excluded; check the elevator collision and other ensuing-loss terms if a separate covered cause follows.Mechanical failure includes rupture or bursting caused by centrifugal force, subject to the grant and exclusions.
Lightning damages a backup power systemIdentify qualifying lightning damage and the applicable grant.B.14 excludes a resulting Breakdown from lightning when another policy provides the cited cause-of-loss coverage, whether collectible or not. Check the other policy before deciding.

Trigger and equipment definition

EB 00 20 01 13 defines a Breakdown through three mechanisms: failure of pressure or vacuum equipment, mechanical failure including centrifugal rupture or bursting, and electrical failure including arcing. It must be a qualifying direct physical loss that damages Covered Equipment and requires repair or replacement. For instance, a compressor that physically seizes during production can qualify as a mechanical failure. A thermostat that only needs resetting has not shown that physical-loss trigger.

Covered Equipment includes equipment built to operate under internal pressure or vacuum beyond the weight of its contents; electrical or mechanical equipment used to generate, transmit or use energy; and communication or computer equipment. Ordinarily it must be at a described premises and owned, leased or operated under the insured's control. The definition has separate utility and contingent locations. Equipment and the property it damages are different inquiries. A rupture can damage adjacent property without making the adjacent property Covered Equipment.

The named base form excludes specified supporting structures, cabinets and foundations from Covered Equipment, along with media, specified buried equipment requiring excavation, vehicle-mounted and construction equipment, routine replacement parts and equipment manufactured for sale. Machinery used solely for listed diagnostic, research or medical purposes requires the Diagnostic Equipment election. Check the declarations before assuming an MRI qualifies.

Sorting exclusions from events that do not qualify

  • The definition does not include specified malfunctions, software defects, leakage at listed fittings or seals, or simple operation of a safety device. A pressure or electrical test is separately excluded by B.11.
  • Wear, corrosion and similar deterioration are excluded. B.13 preserves damage resulting from a qualifying Breakdown. Replacing a worn tube before it fails is maintenance.
  • If an engineer identifies a combustion fireball rather than a pressure failure, trace each source and read the applicable form. Fuel combustion, pressure failure, electrical failure and any ensuing fire should be recorded separately.

Cascading equipment damage

An initial Breakdown and Breakdowns it causes are One Breakdown. Breakdowns that manifest at the same premises and time from the same direct cause also count as One Breakdown. The overall limit applies across eligible losses from that event. If a textile plant transformer arcs and the surge physically damages a second motor, trace whether the first failure caused the second. Under section D.1, for multiple items of Covered Equipment in One Breakdown, apply the highest applicable deductible for each relevant coverage, subject to any declared combined deductible. Check each coverage’s applicable limits.

Immediate suspension and Georgia safety duties

An insurer representative can immediately suspend insurance against Breakdown of specific equipment found in or exposed to a dangerous condition. The base form requires written notice delivered or mailed to the insured's last known address or the equipment location. Reinstatement requires an endorsement for the equipment. The pro rata refund does not delay suspension. Check the notice, effective time and applicable amendments.

Georgia Rules 120-3-26-.08 through .10 address required inspections, safety orders and accident reporting separately. Check current exemptions under O.C.G.A. § 25-15-16. In a boiler explosion, the rule calls for immediate telephone notice to the Chief Inspector and a detailed follow-up report. It restricts disturbing equipment before permission, subject to saving life and limiting consequential damage. Keep the state orders and the insurer's suspension record separate in the claim file.

Test Your Knowledge

A carpet mill uses unendorsed CP 10 30 09 17. Electrical arcing causes $85,000 of damage to a switchgear panel and starts a fire that causes a separate $120,000 in covered wall and inventory damage. The panel loss is solely from arcing. With sufficient limits and no deductible or other adjustment, what does the form provide?

A

$205,000 for arcing and fire

B

$120,000 for separately caused ensuing fire damage

C

$85,000 for the switchgear alone

D

$0 because arcing preceded the fire

Test Your Knowledge

Assume EB 00 20 01 13 applies with the appropriate declared grant and the equipment qualifies. Which event clears the Breakdown and cause-of-loss requirements?

A

A steam boiler ruptures during a scheduled pressure test

B

A server stops processing due to software ransomware with no equipment damage

C

A centrifuge rotor tears apart from centrifugal force in normal use, physically damaging the machine and requiring repair

D

A worn tube is replaced before any failure

Test Your Knowledge

An insurer representative delivers a valid written EB 00 20 01 13 suspension notice to the plant where a dangerous steam boiler is located. Two days later it fails from internal steam pressure. No reinstatement endorsement has issued. What is the effect of the notice?

A

The Breakdown insurance on the specific boiler is suspended

B

A 30-day cancellation period always delays the suspension

C

Payment of premium keeps the equipment insured despite the notice

D

The One Breakdown clause transfers the loss to the commercial property insurer

Sections you finish are checked off in the contents.