Free FAA AMA Exam Prep
FAA Aviation Mechanic — Airframe Knowledge Test (AMA)
Prepare for the FAA AMA exam without spending hundreds on expensive prep courses. Free study guides, practice questions, flashcards, and related exam resources.
Quick Facts
Buy on AmazonExplore More FAA Airman and Aviation Certificates
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
More From This Family
Videos and articles for deeper review.
FAA FAA Airman and Aviation Certificates License: Complete Roadmap
Follow this path to organize your licensing and exam preparation
Master Structures, Sheet Metal, and CompositesYou are here
Start with the largest subject: rivets and edge distance, bend layout, alclad, structural repair, and composite/honeycomb inspection.
Add Landing Gear, Hydraulics, and Pneumatics
Study oleo struts, down-locks, brakes/anti-skid, accumulators, relief/sequence valves, and fluid compatibility.
Cover Electrical, Rigging, Fuel, and Environmental Systems
Work through bonding and wire sizing, cable rigging and turnbuckles, fuel feed/venting, pressurization, and oxygen safety.
Finish Instruments, Inspection, and the Smaller Subjects
Drill pitot-static, inspection regulations, comm/nav, fire protection, ice/rain, welding, and position/warning systems under timed sets.
Can You Take the FAA AMA Exam?
Check if you meet the basic eligibility requirements
- •Meet 14 CFR Part 65 eligibility via graduation from an FAA-approved Part 147 school or documented practical experience
- •Obtain authorization to test in the Airframe rating
- •Pass the Airframe (AMA), General (AMG), and a corresponding oral and practical test for the rating
FAA AMA Quick Facts
Time to Get Licensed
4-8 weeks typical preparation
From start to license in hand
Retake Policy
14 CFR 65.19: retest after 30 days, or sooner with a signed statement from an airman holding the certificate and rating sought certifying additional instruction in each failed subject.
Total Cost Breakdown
Free FAA AMA Prep Tools
Reported exam pass rate: 74% first-time equivalent (FAA CY2025 airman knowledge test statistics: 74.01% pass, 16,885 tests). Check the exam sponsor for the latest official figure.
100 Practice Questions
Built to the 14 CFR 65 / FAA-S-ACS-1 Airframe subject areas with full explanations.
Current 2026 Blueprint
Matches the 100-question, 2-hour, 70%-to-pass computer-based AMA test delivered via PSI.
Free Prep
Full bank with no paywall while you target weak airframe subjects before the official test.
What You'll Study
16 chapters covering the exam topics in this guide
Chapter 1: Introduction & Exam Strategy
2 sections
Chapter 2: Metallic Structures & Sheet Metal Repair
4 sections
Chapter 3: Non-Metallic Structures: Composites, Wood, Fabric & Transparent Plastics
5 sections
Chapter 4: Welding & Structural Fasteners
3 sections
Chapter 5: Flight Controls, Assembly & Rigging
4 sections
Chapter 6: Hydraulic & Pneumatic Power Systems
4 sections
Chapter 7: Aircraft Landing Gear Systems
4 sections
Chapter 8: Aircraft Fuel Systems
4 sections
Chapter 9: Airframe Electrical Systems
4 sections
Chapter 10: Cabin Atmosphere & Environmental Control
4 sections
Chapter 11: Aircraft Instrument Systems
4 sections
Chapter 12: Communication, Navigation & Warning Systems
4 sections
Chapter 13: Ice, Rain & Fire Protection Systems
4 sections
Chapter 14: Airframe Inspection & Maintenance Regulations
4 sections
Chapter 15: Rotorcraft Fundamentals
3 sections
Chapter 16: Water & Waste Systems
2 sections
FAA AMA-Specific Topics Covered
FAA AMA Exam Details
FAA Aviation Mechanic — Airframe Knowledge Test (AMA)
Administered by Federal Aviation Administration (FAA)
Exam Content Breakdown
Based on the official Federal Aviation Administration (FAA) content outline
Sheet metal layout, riveting, and structural repair
Composites, wood structures, fabric covering, and finishes
Control surfaces, cable rigging, and balancing
Required inspections, records, and conformity
Gear, wheels, brakes, tires, and retraction systems
Fluids, actuators, seals, and power systems
Cabin atmosphere control, pressurization, and oxygen
Pitot-static, gyroscopic, and electronic instruments
Avionics installations, antennas, and aircraft lighting
Tanks, fuel quantity indication, and fueling safety
Wiring, circuit protection, and power generation
Anti-ice, de-ice, and rain removal systems
Fire detection loops and extinguishing systems
Helicopter rotor systems and vibration
Potable water and lavatory systems
What's Included
16 Chapters
Complete exam coverage
Practice Quizzes
With detailed explanations
Free to Start
No credit card required
Quality Exam Prep Shouldn't Cost Hundreds
I'm Ran Chen, an engineer with 20+ years of coding experience. I passed my Life Insurance license, EA exam, SIE, Series 6, 63, 65, and finally the CFP® exam.
Through all these exams, one thing became clear: exam prep is expensive. But with AI, we can change that. Quality preparation can now be free for everyone.
FAA AMA Exam FAQ
Official Federal Aviation Administration (FAA) Resources
Verify information with these official sources
More Free Resources
Ready to Start Your Free FAA AMA Prep?
Review the study guide, practice key concepts, and use the free tools at your own pace.