2.2 Levels of Decontamination: Cleaning, Disinfection & Sterilization
Key Takeaways
Cleaning removes soil. Disinfection inactivates the pathogens covered by the product and process. Sterilization eliminates all forms of microbial life, including bacterial spores.
Read the EPA registration number and label directions for the actual item, surface, pathogen, concentration and contact time.
Georgia’s wet process for reusable implements includes 10 minutes of complete immersion in suitable EPA-registered disinfectant after cleaning.
Georgia requires a clean, closed, airtight container labeled “Clean Implements” for disinfected implements. Use a separate closed, covered container for dirty implements.
A disinfectant bath, a workstation surface and a water-holding pedicure unit call for different processes.
Choose the process by its purpose
| Process | What it accomplishes | Example |
|---|---|---|
| Cleaning | Removes soil, such as hair, oils and product residue, and physically removes some microorganisms. | Wash reusable shears with warm soapy water before immersion. |
| Disinfection | Inactivates many or all pathogenic microorganisms on an inanimate object, depending on the process. Ordinary disinfection does not reliably eliminate bacterial spores. | Keep a cleaned work surface wet for the disinfectant label’s full contact time. |
| Sterilization | Eliminates all forms of microbial life, including bacterial spores. | Use a validated steam cycle when appropriate for the device and load. |
Soil can interfere with the action of a disinfectant, and dirt lodged at a hinge can shield the surface from contact. If product has hardened between two blades, remove it before starting the disinfection step. For skin, use products labeled for the intended skin use. A hand antiseptic or hand sanitizer is a different product from an EPA-registered disinfectant for a workstation or implement. Surface sanitizing is also a specific label claim and differs from surface disinfection.
Apply the Georgia rule to the item
- Reusable client implements. Rule 240-4-.04(2)(b) sets a wet process of cleaning with warm soapy water, immersing completely in a suitable EPA-registered disinfectant for 10 minutes, rinsing in clean warm water and blotting dry. Choose a product with directions that can meet the state process. The disinfectant must remain free of contaminants and be changed daily. Use the closed, airtight “Clean Implements” storage and keep dirty tools in separate closed, covered storage labeled “Dirty Implements.”
- Daily workstation and equipment. Keep soiled material out of the clean work area, then clean affected surfaces and choose a disinfectant labeled for the equipment or work surface. Follow the equipment instructions, including limits on moisture around electrical components. Reprocess the removable reusable implements according to the applicable rule. Georgia separately requires sinks and shampoo bowls to be cleaned, kept free of debris and disinfected with a registered product. If blood is involved, use the blood exposure and cleanup guidance in this chapter.
- Water-holding pedicure equipment. The Georgia rule’s between-client minimum is 15 minutes of disinfection after cleaning. The end-of-day circulation and flush and the weekly process have their own requirements. Follow the pedicure equipment schedule in the nail chapter. EPA recommends a hospital-use disinfectant for foot spas. That guidance concerns foot spas, while Rule 240-4-.04 specifies EPA registration for the given salon disinfection process.
- Single-use items. Discard a used wooden orange stick, cotton swab, disposable buffer or neck strip after one use. Blood-contaminated disposable implements, sharps and bloody linens have their own containers and handling procedures under Georgia’s rules. A used wax applicator must stay out of a shared product container.
Georgia also accepts an autoclave meeting the standards referenced in Rule 240-4-.04(2)(c). Follow the validated cycle for the load. Exposure time varies with the cycle and load. Biological indicators use resistant spores to check whether the cycle can kill them. Physical and chemical indicators provide separate information about the cycle conditions. A UV cabinet can provide labeled storage for implements after proper reprocessing.
Read the label before choosing or mixing a product
Start with the EPA registration number. Confirm the product’s intended site and surface, the method such as wiping or immersion, and the relevant efficacy claim. A quaternary ammonium, phenolic, sodium hypochlorite or peroxide formulation has its own directions and cautions. An active ingredient alone does not establish which pathogens the product controls, what material it can contact or how long it must stay wet.
Measure exactly as the current container label directs. Check the Safety Data Sheet and label for appropriate gloves, eye protection, ventilation, spill response and safe storage. Keep products in properly identified containers and never mix separate chemical formulations to try to increase potency. Keep bleach away from other cleaners. There is no single dilution recipe for every bleach or use. Georgia’s weekly foot spa procedure is a specific case with its own concentration and directions.
Worked label example. The EPA-accepted Barbicide concentrate label for registration 954-11 gives a mixing instruction of 2 fluid ounces of concentrate with 32 fluid ounces of water. If proportionally preparing half that batch, use 1 fluid ounce of concentrate with 16 fluid ounces of water. The same label specifies 10 minutes of complete immersion for the listed beauty and barber tools, followed by rinsing and drying. Check the printed label on your actual product. The numerical example is for that concentrate and use.
Worked contact-time example. A suitable workstation product’s label calls for four minutes of wet contact for the use selected. The cleaned surface is sprayed at 3:01 p.m. and wiped dry at 3:03 p.m. Only two minutes of contact have elapsed. Repeat the labeled disinfection process for the full wet period. The Georgia 10-minute tool immersion process is a separate application. For a blood spill, check the product’s use site, claims and directions for bloodborne pathogens. EPA’s List S identifies products and pathogen-specific times, and the actual label governs use.
Sources checked November 16, 2026. Georgia facility rules, CDC decontamination definitions, CDC steam sterilization, EPA disinfectant label guidance, EPA label 954-11, EPA foot spa recommendations, EPA List S, EPA chemical mixing guidance, and OSHA nail salon chemical hazards.
What distinguishes sterilization from routine surface disinfection?
Routine disinfection always destroys all bacterial spores
Sterilization works only on living skin
Sterilization eliminates all forms of microbial life, including bacterial spores
A surface wiped clean of visible material is sterile
The label of a disinfectant concentrate gives dilution and immersion directions for reusable salon implements. How should you make the working solution?
Follow that label’s mixing directions, use the specified protection, and confirm the intended method meets Georgia’s rule
Use the dilution ratio for any product with the same active ingredient
Mix bleach into the solution to extend its claims
Use the ready-to-use product’s directions for this concentrate
Which item must be discarded after use on a client under Georgia Rule 240-4-.04?
A reusable stainless-steel cuticle nipper
A reusable hard-plastic comb
A reusable metal nail file
A wooden orange stick
Sections you finish are checked off in the contents.