9.3 Perm Wrapping Techniques, Tool Placement & Neutralization Chemistry

Key Takeaways

  • Rod shape and diameter influence the curl. Distribute the hair smoothly and avoid concentrated rod or band tension.

  • Single flat, double flat and folded papers support the ends and help prevent creases during winding.

  • On-base, half-off and off-base describe the rod’s resting position relative to its partings.

  • A bricklay pattern offsets rows, a spiral places hair along the rod, and a double-rod wrap can distribute an especially long subsection.

  • Rinse with the rods in place when the system directs it. Follow the selected neutralizer’s preparation, application, timing and removal instructions.

Last updated: November 2026

9.3 Perm Wrapping, Placement and Neutralization

Start with the hair’s length, existing condition and desired movement. A workable wrap controls the ends and distributes hair without pulling the roots. It also lets you apply lotion and neutralizer as the product directs.

Rods and End Papers

Tool or wrapUse and limitation
Concave rodThe narrower center has less circumference than its wider ends. The curvature experienced by the hair can differ across the rod when the subsection spans it.
Straight rodA consistent diameter supports a more even winding surface. Hair length and buildup of turns can still affect the result from roots to ends.
Flexible or loop rodChanges the shape or handling of the winding tool. Select it and secure it according to its design.
Single or double flat paperUse one sheet to guide the ends or two sheets to sandwich ends that are harder to hold together.
Bookend paperFold one paper over both sides of the ends. Keep the ends flat and inside the paper before the first turn.

Control the paper and ends while keeping the section no wider than can be wound evenly on the usable rod. Inspect for a folded end before advancing. Secure a rod’s band or closure according to its design, without pressing into the scalp, twisting the hair or concentrating tension. A wrap that looks tidy and sits securely should still feel comfortable. Milady wrap patterns and tool placement

Base Control and Pattern Choice

The base is the area between partings for a subsection. Base direction describes how that area and the winding direction are arranged on the head. Base placement describes where the rod sits relative to the partings. Projection of the subsection affects where the rod lands.

PlacementRod positionDesign implication
On-baseRests between its own partings.Places the wrap close to its base and can support lift there.
Half-off baseRests partly over the base and partly outside the base.Allows a less elevated design while keeping the rod partly over its section.
Off-baseRests beyond the base.Can direct the section away from the base and reduce root lift.

Placement alone does not establish tension. Pay attention to section size, angles, how tightly you wind and how the holder sits. A basic straight-set pattern aligns rods within a panel. A curvature pattern follows the head shape. A bricklay offsets rows to help blend part lines. A woven transition can break up an abrupt boundary between worked and unworked hair. In a spiral wrap, hair winds along the rod. With very long hair, a double-rod or piggyback wrap can distribute one subsection across two rods, winding the second segment in the same direction to manage buildup. Milady basic, bricklay, spiral and double-rod wrap examples

Worked wrap choice. One long subsection piles up on a single straight rod and makes it hard to keep the turns even. With suitable hair and a system that permits this wrap, a double-rod approach can distribute the length. Check the ends and tension again, and follow the formula directions for applying enough solution to the distributed sections.

Neutralizing the Wave

Once development ends, use the product's rinse directions to remove reducing lotion. Blot excess water as directed. This reduces carryover of reducing lotion and avoids unnecessary dilution of the next solution. Many neutralizers use hydrogen peroxide, while other oxidizers have also been used. The process promotes oxidation of thiols to disulfide cross-links. It does not require an isolated oxygen atom. A simplified balanced peroxide reaction, with R standing for a protein group, is

2 R−SH+H2O2→R−S−S−R+2 H2O.2\,\mathrm{R{-}SH}+\mathrm{H_2O_2}\rightarrow\mathrm{R{-}S{-}S{-}R}+2\,\mathrm{H_2O}.

This model accounts for two reducing thiol groups and one peroxide molecule. The formula and actual reaction conditions determine reformation and byproducts. Use the neutralizer supplied or specified for the selected waving system. Do not infer concentration or timing from a different product's developer. Human-hair reoxidation with sodium bromate and Zotos peroxide neutralizer ingredient listing

Named example. The Wella Creatine+ curl technical folder describes a three-minute rinse with rods on, blotting excess water, and a two-part neutralizer application. Its illustrated procedure applies two-thirds on the rods for five minutes, removes the rods, then applies the remaining third to the hair for five more minutes. These numbers belong to that described procedure. Other systems can give different rinse times, points of rod removal and aftercare. Follow the full current instructions for the product in use. Wella Creatine+ curl procedure

Keep the PSI Simulation Separate

Topic 7 is listed as a 45-minute topic. The instructions allow ten minutes for workstation and client preparation, including dividing the hair into four quadrants or sections, then ten minutes to wrap three rods with papers in one section. The PSI tutorial shows a scalp check and a cloth two-towel chemical drape on the manikin. Wait for individual directions to saturate all three rods with simulated solution and demonstrate a test curl. The cleanup stage allows five minutes for rod removal, disposal and station cleanup. The evaluator directs the demonstration stages; the topic’s total time does not set any salon processing or neutralizing time. Georgia PSI test taker guide and PSI chemical waving tutorial

Previous Color and Compatibility

Identify the exact previous color, including progressive restorers, compound plant dyes and lightening. If a prior treatment is prohibited or you cannot establish compatibility, defer the wave. A favorable swatch does not identify an unknown color or override the package restrictions. Avoid improvised concentrated ammonia and peroxide tests. Where the product allows treatment and directs a preliminary check, follow its instructions. Zotos product compatibility chart

Test Your Knowledge

A rod rests entirely between the partings of the subsection wound on it. What base placement does this describe?

A

On-base placement.

B

Half-off base placement.

C

Off-base placement.

D

A spiral pattern, regardless of its base.

Test Your Knowledge

In a permanent wave system that directs rinsing and blotting before applying neutralizer, what is their purpose?

A

Rinsing activates more reducer, and blotting begins lanthionization.

B

Rinsing lowers the rod temperature and blotting dries the cuticle shut.

C

Rinsing breaks peptide bonds and blotting reforms them.

D

Rinsing removes residual waving lotion, and blotting takes off excess water.

Test Your Knowledge

A client wants a permanent wave after using a progressive home color. They cannot identify the product. The selected wave directions exclude hair treated with color restorers. What should the cosmetologist do?

A

Use the same perm with extra end papers.

B

Use low heat and shorten the timing to offset the history.

C

Defer the wave and explain the compatibility restriction.

D

Use a larger rod to keep the waving lotion from reacting with the hair.

Sections you finish are checked off in the contents.