1.3 Georgia Salon Sanitation Rules & Disinfection Standards (Chapter 240-4)

Key Takeaways

  • Wash between clients and wear the protection appropriate to the service. Use suitable client covering where needed.

  • Georgia requires washable multi-use implements to be cleaned, immersed completely in suitable EPA-registered disinfectant for 10 minutes, rinsed with clean warm water and blotted dry.

  • Store disinfected and soiled implements separately in the labeled closed containers specified by Georgia Rule 240-4-.05.

  • Dispose of single-use items after one use. Use Georgia’s separate procedures and log for water-holding pedicure equipment.

  • Keep wax and other client products in sanitary closed containers. Prevent contamination when dispensing.

Last updated: November 2026

Identify what must be reprocessed

Georgia Rule 240-4-.03 requires handwashing before and between services for each client. Wear appropriate protective clothing or footwear and provide clients with protection suited to the work. In a color service, a protective covering helps prevent chemicals from reaching the client’s clothes or skin. In a nail service, move used implements to the appropriate dirty container as soon as the service is over.

Cleaning removes physical soil. Disinfection controls microorganisms on hard surfaces and implements when the disinfectant is used according to its directions. Sterilization destroys all forms of microbial life, including bacterial spores. Look at the item first. A used steel nipper can be reprocessed. A used wood applicator or disposable neck strip goes out after one use. Reprocessing a tool requires a process appropriate to its material and construction.

Clean, disinfect and store reusable implements

Under Rule 240-4-.04, use the wet process below for reusable nonporous tools such as shears, metal nippers, combs and tweezers.

  1. Clean with warm soapy water. Remove hair and debris before disinfection.
  2. Immerse fully for 10 minutes in a suitable EPA-registered disinfectant. Choose a product labeled for the use and follow its dilution, contact time and safety directions as well as the state requirements. Select a container that covers all surfaces of the tool. Replace solution daily and keep it free of debris and contaminants.
  3. Rinse with clean warm water and blot dry. Remove tools for proper dry storage after disinfection.
  4. Store in the designated clean location. Rule 240-4-.05 calls for a clean, closed, airtight drawer or container labeled “Clean Implements.” Keep used tools awaiting reprocessing in a separate closed, covered container labeled “Dirty Implements.”

A steam autoclave meeting the standards stated in Rule 240-4-.04(2)(c) is an acceptable option under the rule. An ultraviolet cabinet may hold tools already cleaned and disinfected if it is labeled for clean implements. Its light does not replace reprocessing.

Worked example. A clean set of tweezers falls into an open container of used implements. Reprocess the tweezers before using them. A closed “Clean Implements” drawer protects the other disinfected tools during that process. If the immersion solution contains hair or residue, replace it before reprocessing.

Use the separate procedures for other items

ItemGeorgia salon handling
Single-use wooden applicator, porous file, disposable buffer or neck stripDiscard after one use.
Ordinary used towel or linenPut it into a closed container until it is properly laundered.
Bloody towel or linenUse a separate closed container marked for contaminated linen. Wash it separately using EPA-registered disinfectant and detergent as the rule specifies and follow the manufacturer’s directions.
Blood-contaminated disposable implementUse the labeled hazardous-waste container specified by Rule 240-4-.05(1)(d). Put sharp blades into the appropriate sharps container.
Shampoo bowlClean it, remove hair and other debris and disinfect with an EPA-registered disinfectant.
Pedicure unit that holds waterUse the separate after-client, daily and weekly procedures in Rule 240-4-.04(4) and keep the dated, timed log in the pedicure area.

For a water-holding pedicure unit between clients, remove visible debris with chelating soap or detergent and water, clean beneath any removable footplate and disinfect the unit for at least 15 minutes with an EPA-registered disinfectant. Follow the separate end-of-day and weekly instructions for the equipment, including the required basin and circulating-system procedures where applicable. A tool immersion bath and a circulating foot spa are different settings with different procedures.

Prevent contamination at the point of service

Keep wax, creams, lotions and other client products in sanitary closed containers. Use a disposable or properly disinfected dispensing tool to transfer the needed portion. A wax applicator that has touched skin goes out after use instead of returning to the main pot. If you need more product during the service, use a fresh applicator. Keep the main container away from filings and other debris.

Georgia Rule 240-4-.03(8) prohibits use of a Credo blade or another implement designed to cut or remove layers of skin. Check the intended function of an implement before using it on a callus. Georgia’s required signage also says not to reuse a pumice stone between clients. If a service causes a cut, stop; follow the blood exposure guidance in Chapter 2 and handle contaminated tools, linens and disposable items according to the correct category above.

Practice setting up and resetting a station

Start with a cleaned and disinfected work surface. Wash your hands, pull the clean tools and supplies you need, and close the supply kit before beginning. Keep used items and waste out of the clean area. Check the condition of equipment and keep cords out of walking paths. If liquid spills where someone could walk, keep traffic away until the hazard is corrected. Follow the Safety Data Sheet and workplace procedure for a chemical spill. At the end, isolate used reusable items for reprocessing, discard single-use supplies, clear debris and clean and disinfect the work surface for the next client. OSHA walking-working surfaces and Georgia facility rules.

Georgia practical. PSI allocates 10 minutes to initial daily workstation preparation (topic 1) and 10 minutes to the final reset for the next client (topic 11). Rehearse both using a closable supply kit as required by PSI. If a used comb touches the clean work surface during reset, separate it for reprocessing and clean and disinfect the affected surface before laying out clean supplies. PSI Georgia bulletin, practical topics 1 and 11

Sources checked November 16, 2026. Georgia facility rules, Chapter 240-4, EPA registered disinfectant guidance, and CDC definition of sterilization.

Test Your Knowledge

Under Georgia Rule 240-4-.04, which procedure should you use to reprocess reusable shears in a wet disinfection bath?

A

Clean with warm soapy water, fully immerse in a suitable EPA-registered disinfectant for 10 minutes, then rinse with clean warm water and blot dry

B

Wipe with alcohol and place inside a UV cabinet to complete disinfection

C

Place unwashed shears in disinfectant for five minutes and then leave them there for storage

D

Rinse the shears with water and lay them on an open towel until the next client

Test Your Knowledge

Which implement does Georgia Rule 240-4-.03(8) prohibit a licensee from using during pedicure callus care?

A

A clean towel for drying the foot

B

A disposable applicator for dispensing foot lotion

C

A disinfected nonporous tool for trimming a toenail

D

A razor-type callus shaver designed to cut away a callus

Test Your Knowledge

Where should a Georgia salon put a blood-contaminated disposable, nonsharp implement?

A

In the “Clean Implements” drawer after the service

B

In a designated hazardous-waste container labeled for biohazard or contaminated implements

C

In the ordinary laundry bin with used towels

D

In the immersion bath with reusable instruments

Sections you finish are checked off in the contents.