10.3 Curl Re-formation (Soft Curl Perms) & Professional Keratin Smoothing Systems
Key Takeaways
A thio soft curl permanent uses a rearranger, rod wrap with the prescribed booster, and matched oxidizing neutralizer to reshape curl.
Decline a thio curl re-formation over hydroxide-relaxed lengths. The selected product’s compatibility limits and required checks control the service.
Smoothing formulas vary. Check the active ingredients, intended result, permitted hair history, heat settings and aftercare for the specific product.
Some heated smoothing products can release formaldehyde. Check ingredients and the safety data sheet, and use the controls and monitoring applicable to the workplace.
For OSHA formaldehyde exposure, distinguish the 0.5 ppm eight-hour action level, the 0.75 ppm eight-hour permissible exposure limit, and the 2.0 ppm 15-minute limit.
10.3 Curl Re-formation (Soft Curl Perms) & Professional Keratin Smoothing Systems
Curl re-formation and smoothing can both change the look of textured hair. The intended result can differ: a client might want larger curls or might want to reduce frizz without losing the curl pattern. Identify the service, formula and client’s previous treatments before making a plan.
Curl Re-formation (Soft Curl Permanent)
A thio curl re-formation softens a tight curl pattern and reshapes it on rods to form a looser curl or wave. The sequence combines a controlled change to disulfide links with mechanical shaping.
| Stage | Purpose and placement |
|---|---|
| Rearranger | Use the selected thioglycolate system to soften the existing curl. Remove the rearranger at the stage specified by the system. |
| Wrap and boost | Choose rods suited to the planned design and hair length. The matched booster or waving solution is applied at the point specified for that wrap. Process, rinse and remove excess water as directed before oxidation. |
| Oxidize and finish | The matched oxidizing neutralizer promotes disulfide reformation in the shaped hair. Use the specified sequence for neutralizer application, rod removal, final rinsing and aftercare. |
Application, timing and compatibility depend on the system. Decline a thio service over lengths previously relaxed with hydroxide. If the previous formula cannot be established, defer; a strand check on otherwise eligible hair is a way to evaluate the fiber’s response, not a chemical identification test. Milady Procedure 15-8, Soft Curl Perm, manufacturer example of a named thio-system incompatibility and human-hair reoxidation study
Select and Finish a Smoothing Service
| Service | What to verify before beginning |
|---|---|
| Hydroxide relaxer | Confirm eligible hair history, protection, application zone, and rinse and finishing method for the named alkaline system. |
| Thio curl re-formation | Confirm the client wants a larger curl or wave. Check prior chemistry, the rod design, and the matched products and removal sequence. |
| Smoothing treatment | Check the exact product, ingredients, safety data, result, approved hair condition, application technique, any heat and aftercare. The words “keratin smoothing” do not identify the mechanism or the presence of a hazardous ingredient. |
For example, CHI Enviro uses different heat settings for different hair conditions in its professional instructions. The choice of temperature and number of passes belongs to the product procedure. Record the exact service and give aftercare for that formula. The manufacturer of KCEXPRESS allows shampooing after eight hours. Cezanne gives a different instruction and allows washing and using hair ties immediately after its treatment. Avoid assigning a class-wide waiting period, shampoo ingredient restriction or flat-iron temperature. CHI Enviro directions, KCEXPRESS directions and Cezanne professional instructions
Formaldehyde Release and Exposure
Methylene glycol (methanediol) is the hydrated form of formaldehyde in solution. Some smoothing products can release formaldehyde into the air during use, including when dried or flat-ironed. Emission can occur before any one specified iron setting. FDA and OSHA have identified products that could expose people to formaldehyde despite labeling or marketing that implied absence. Evaluate the exact formula and how it is used instead of relying on the product category, a fragrance, or a claim on its front label. FDA formaldehyde and hair-smoothing guidance, OSHA product guidance and NIOSH salon exposure evaluation
Formaldehyde can irritate the eyes, nose, throat and lungs and can cause skin or respiratory sensitization. Exposure also carries a cancer hazard. If vapors cause symptoms during a service, stop the service, move the affected person to fresh air when safe and seek appropriate help. Severe breathing trouble requires emergency help. In the workplace, promptly report potentially related symptoms to the employer so exposure and medical follow-up are addressed. FDA hazard information and OSHA formaldehyde standard
Apply the Correct Workplace Standard
| OSHA threshold for formaldehyde in air | Meaning for covered employers |
|---|---|
| 0.5 ppm, eight-hour time-weighted average | Action level. At or above it, the standard specifies continued exposure monitoring and medical surveillance for the affected exposure group. |
| 0.75 ppm, eight-hour time-weighted average | Permissible exposure limit for the full-shift average. |
| 2.0 ppm, 15-minute average | Short-term exposure limit. At or above it, periodic monitoring applies. Medical surveillance applies when the limit is exceeded, and the standard separately covers affected employees with symptoms or emergency exposures. |
Assess employee exposure under 29 CFR 1910.1048. Reassess relevant changes and reports of symptoms as the standard directs. Use engineering and work-practice controls to meet the exposure limits, and follow the standard’s specific respirator and protection requirements when applicable. Generic organic-vapor cartridges are not a substitute for the required selection for formaldehyde. Keep required safety data for hazardous products readily accessible under the Hazard Communication Standard. 29 CFR 1910.1048(d), (f)–(h), (l) and 29 CFR 1910.1200
Worked monitoring decision. An employee’s representative eight-hour average is 0.60 ppm and their 15-minute average is 1.4 ppm. The eight-hour result is below the eight-hour permissible limit but at or above the action level. Both averages are below their exposure limits. The employer still has monitoring and medical surveillance duties because the action level has been reached.
In Georgia, check the facility’s applicable mechanical code and local requirements separately from employee exposure limits. Georgia adopted the 2024 International Mechanical Code with state amendments effective January 1, 2026. Georgia Board Chapter 240-4 governs cosmetology facilities and does not impose a dedicated source-capture arm at every hair-smoothing chair. Local exhaust can be an engineering control, and separate building or code requirements can apply to the premises. A fan or a room-ventilation rating does not establish compliance with a worker’s exposure limit. Georgia Board facility rules, Georgia DCA current mechanical code and OSHA salon exposure guidance
What sequence of chemical products is utilized during a professional curl re-formation (soft curl permanent) service?
A hydroxide rearranger, followed by a thioglycolate booster and an acid-balanced shampoo.
A thio neutralizer before the rearranger, followed by wrapping and hot ironing.
A smoothing solution, followed by rod wrapping and a hair color developer.
A thio rearranger, followed by the prescribed rod wrap and booster, then the matched oxidizing neutralizer.
A salon uses a smoothing product whose ingredients include methylene glycol. Which statement applies when it is used with heat?
It is a thioglycolate reducer that becomes active only after the hair is rinsed.
The product can release formaldehyde into the air. The employer must follow applicable monitoring and exposure-control requirements.
Formaldehyde can be released only if a flat iron reaches 450°F.
The product is exempt from review if the front label does not say formaldehyde.
A KCEXPRESS treatment ends at 3:00 p.m. on Tuesday. Its manufacturer gives an eight-hour wait before shampooing. When is the earliest the client can shampoo?
11:00 p.m. on Tuesday.
7:00 p.m. on Tuesday, four hours after the service.
3:00 p.m. on Wednesday, because all smoothing services require a full day.
3:00 p.m. on Friday, because all keratin treatments require three days.
Sections you finish are checked off in the contents.