10.2 Relaxer Application Procedures, Base vs. No-Base, Neutralizing & Safety Precautions
Key Takeaways
Follow the product’s base cream and protection instructions. No-base formulas can still require protection at the hairline and ears.
Screen the scalp and chemistry history first. Use the selected product’s strength guide and required checks for eligible hair.
A virgin service can stage the application by zone. A retouch treats only eligible new growth and avoids previously relaxed hair.
Rinse away the relaxer before using the named post-relaxer products. An indicator has the meaning specified by its manufacturer.
Stop a service for burning or accidental exposure. Immediate water irrigation and prompt medical guidance take priority over finishing the hair.
10.2 Relaxer Application Procedures, Base vs. No-Base, Neutralizing & Safety Precautions
Before applying a hydroxide relaxer, check the scalp, the condition of the hair and the history of each zone you may treat. Know the selected product’s timing, scalp protection and rinse directions before mixing or opening it. A retouch has a smaller treatment area than a virgin application. Both require control over where the formula goes and when it is removed.
Base Cream and Formula Strength
| Selection | What to do |
|---|---|
| Base relaxer | Apply a separate protective base where the system specifies, which may include partings across the scalp, the hairline and the ears. |
| No-base relaxer | Follow the label for any scalp or perimeter protection. CHI Deep Brilliance, for example, is a premixed no-base relaxer whose preparation directions still include protection. The term does not make contact with skin safe. |
| Strength names such as mild, regular or super | Use the manufacturer’s strength chart for the selected line. Evaluate resistance, texture, condition and prior work rather than assigning a strength or timing by curl pattern alone. |
Read the product warnings, wear the specified chemical protection, and drape the client for the chemical service. Never use base cream to justify applying product to an irritated or broken scalp. Wear gloves compatible with the product and use splash protection as directed. CHI Deep Brilliance preparation and warnings and Design Essentials product directions
Pre-Service Analysis and Contraindications
Inspect the scalp in accessible partings. Defer for abrasions, open areas or irritation, and refer when the findings call for medical advice. Ask about prior relaxing, waving, smoothing, lightening and color, including what still remains from home services and how recently the scalp was scratched, brushed or shampooed. Use the actual preparation restrictions. CHI directs against shampooing before its virgin application and excludes previously bleached, damaged, thio-treated, henna-colored and metallic-dyed hair for the named relaxer.
Where instructed, check an otherwise eligible hair sample before full application. A strand check can help assess response, condition or timing within the product limits. Any prescribed skin or patch check is a separate step. Neither makes a prohibited chemical overlap, irritated scalp or unknown product history eligible, and an improvised concentrated ammonia and peroxide test cannot clear the proposed service. CHI scalp and chemical history restrictions
Virgin and Retouch Application
- Prepare and map the areas. For a virgin application, verify that the proposed area has no prior relaxer and that any other treatment is allowed. Part the hair so you can see your work and apply the product evenly. Determine where to start from the manufacturer’s procedure.
- Apply by zone. In a staged virgin method, the midlengths are treated first, keeping the relaxer off the scalp and reserving the near-scalp hair and ends until the product directions call for them. Different areas can respond differently. In CHI’s virgin example the first application stays one-half inch from the scalp. The later root-area pass leaves one-eighth inch of clearance. Those distances belong to the named procedure.
- Treat new growth only in a retouch. The line of demarcation is the boundary between new growth and previously treated lengths. Use a clearly controlled subsection and stop before overlapping. If you cannot identify and isolate eligible new growth, defer. Adding more relaxer to already treated hair raises the risk of breakage.
- Monitor and remove. Use the specified application, checking and timing instructions. A slow response does not authorize extra time or heat. If the client reports burning, stop and rinse promptly. Use the product’s water rinse to remove the bulk of the relaxer before its post-relaxer steps.
Worked decision. During a retouch, you find a short area where you cannot reliably distinguish or isolate the new growth. A product marketed as milder does not make overlap appropriate. Defer the uncertain area or the service. Document the finding before discussing a new plan. CHI virgin directions and Milady relaxer retouch, Procedure 15-2
Rinse, Then Follow the Finishing Directions
Hydroxide processing and thio processing require different finishing steps. A hydroxide service calls for thorough removal and the named post-relaxer products to address remaining alkalinity. A thio system uses its matched oxidizer to promote disulfide reformation. Do not substitute a perm oxidizer for a post-hydroxide product.
For example, the Design Essentials Milk & Honey Neutralizing Conditioning Shampoo directs stylists to rinse off the relaxer first, then shampoo and rinse as directed. The indicator for that shampoo uses pink lather to signal residual relaxer. Use the manufacturer’s endpoint for that product. Lather color is not a pH reading, and the procedure does not establish a universal number of washes or contact time. Design Essentials labeled shampoo directions
Accidental exposure. A rinse at the end of normal processing is a service step. If caustic relaxer splashes into an eye or onto skin, stop and immediately flush the exposed area with plenty of water. For eye exposure, obtain urgent medical help while irrigation continues. Follow the product safety data and Poison Control or emergency responders for further directions. Avoid attempting to neutralize a chemical burn with a salon product. ATSDR sodium hydroxide first aid and Poison Control
Georgia Practical Exam
PSI’s Georgia test taker guide describes a sodium hydroxide relaxer application demonstration. The topic allocates five minutes for setup and preparation, ten minutes to demonstrate application to three subsections in one quadrant or section, and five minutes for cleanup. Follow PSI’s current kit and labeling instructions and the evaluator’s cues. This task does not set a salon processing time. Georgia PSI test taker guide, topic 8
A no-base relaxer’s instructions specify applying protective cream around the hairline and ears. How should the cosmetologist prepare?
Omit the barrier because no-base formulas make skin contact safe.
Protect the hairline and ears as directed and keep the relaxer off the skin.
Apply the relaxer directly to skin, then add the protective cream.
Use the protective cream to allow service over open scalp abrasions.
At a retouch, you can see the boundary between untreated regrowth and previously hydroxide-relaxed lengths. Which area should receive the relaxer?
The scalp itself and both sides of the boundary.
The previously treated length where the texture looks uneven.
Only the eligible new growth, following the product’s scalp clearance and avoiding overlap.
The new growth and another inch of relaxed hair to blend the result.
A hydroxide service is finished with a shampoo whose instructions say pink lather indicates residual relaxer. What should the stylist do in this system?
Rinse the relaxer thoroughly first, then follow the shampoo directions, including its repeat-rinse endpoint.
Replace the rinse with the shampoo and use the color as a scalp pH test.
Use the oxidizer from a thio kit to remove the pink shade.
Leave the pink lather on for a fixed extra period regardless of the manufacturer's directions.
Sections you finish are checked off in the contents.