10.1 Chemical Relaxer Chemistry: Sodium Hydroxide (Lye), Guanidine (No-Lye) & Thio Relaxers
Key Takeaways
Hydroxide and thioglycolate relaxers act through different chemistry and require different removal and finishing steps. Use the pH and instructions for the selected system.
Hydroxide treatment can form lanthionine links with one sulfur atom. Oxidizing neutralizer in a thio system can reform some disulfide links between thiols; it does not restore cystine from lanthionine.
Sodium hydroxide relaxers are called lye relaxers. A two-part guanidine kit pairs calcium hydroxide with a guanidine carbonate activator and can still cause chemical burns.
Potassium and lithium hydroxide are other alkaline actives. Sulfite and bisulfite products can modify disulfide links by a different reaction. Read the selected system for use and eligibility.
Avoid applying a thio wave or thio relaxer over previously hydroxide-relaxed hair, and follow the applicable restrictions on a hydroxide relaxer. Screen prior treatments and defer when compatibility is uncertain.
10.1 Chemical Relaxer Chemistry: Sodium Hydroxide (Lye), Guanidine (No-Lye) & Thio Relaxers
Permanent chemical relaxing reduces curl in the treated length by changing the fiber. As the hair grows, the new growth retains its natural pattern. The curl history of a strand matters when you select a second chemical service. Start by distinguishing hydroxide systems from thioglycolate systems. Other reducers, including sulfites and bisulfites, can also be used in texture products.
Compare the Active Systems
| Question | Hydroxide relaxer | Thioglycolate (thio) relaxer |
|---|---|---|
| What changes the hair? | Hydroxide acts in a strongly alkaline system. One possible result is lanthionization. | A thioglycolate system reduces disulfide groups through thiol–disulfide exchange. |
| What can happen to a cross-link? | Lanthionization forms a link with one sulfur atom rather than the two in a disulfide. | Reduction produces thiols and can also produce mixed disulfides. |
| What happens after processing? | Rinse thoroughly and follow the selected system’s post-relaxer steps. | Rinse and use the specified oxidizing product and sequence to re-form disulfide links. |
| What if the hair has been treated before? | Check the relaxer’s own restrictions and avoid incompatible overlap. | Do not apply a thio service to previously hydroxide-relaxed lengths. |
pH measures hydrogen-ion activity on a logarithmic scale. A one-unit rise corresponds to one-tenth the hydrogen-ion activity. That ratio does not measure how much acid is needed to neutralize a product, how fast a relaxer works, or the risk to a particular client. Use the product directions and safety data for the actual system. IUPAC definition of pH
Compare the Links and the Reactions
In hair keratin, a disulfide link uses two sulfur atoms. A lanthionine link uses one. The simplified structures below compare the two links; they do not describe a single-step reaction.
| Link | Simplified structure |
|---|---|
| Disulfide cross-link | |
| Lanthionine cross-link |
Strong alkaline treatment can cause an elimination reaction that produces dehydroalanine. A cysteine thiol can react with that intermediate to form lanthionine. Hydroxide treatment can produce other changes as well; it does not convert every disulfide link to lanthionine. In a thio system, reduction and later reoxidation change the disulfide network. Hydroxide relaxer experiments on human hair, European patent describing the reaction sequence and study of thiol–disulfide exchange in human hair
Lanthionine Links and the Post-Relaxer Step
A lanthionine link contains one sulfur atom. A disulfide link contains two. Ordinary oxidative neutralizers do not simply convert the lanthionine links back to disulfides. Use the selected hydroxide system's rinsing and post-relaxer directions. Do not substitute an oxidizing perm neutralizer.
Read the Formula and the Package
| Formula | What to look for | Decision in the salon |
|---|---|---|
| Sodium hydroxide, or lye | The label lists sodium hydroxide. CHI Deep Brilliance is an example of a premixed sodium hydroxide cream. | Check the specific strength, base directions and previous-service restrictions. |
| Other alkali metal hydroxides | Some products use lithium or potassium hydroxide. Names and packaging vary, and some products are sold as no-lye. | Identify the active ingredient before selecting preparation and finishing steps. |
| Two-part no-lye guanidine system | In this kind of kit, a calcium hydroxide cream is combined with its guanidine carbonate activator. Mixing produces a strongly alkaline guanidine formulation and a calcium carbonate precipitate. | Mix only the matched parts as instructed. A no-lye label does not establish suitability for an irritated scalp. |
| Sulfite or bisulfite | These reducers can cleave disulfide links through sulfitolysis. | Use the intended formula and its eligibility and finishing directions. The ingredient does not determine whether another chemical service can be safely overlaid. |
| Thioglycolate | A reducing system such as ammonium thioglycolate. | Use the same system’s rinse and oxidative finishing directions. Decline planned use over hydroxide-relaxed lengths. |
Lye and no-lye products can both be strongly alkaline. In one study of marketed relaxers, the measured ranges overlapped. The pH of a formula cannot by itself predict how long a client’s hair will take to respond or whether scalp contact will be tolerated. The manufacturer’s directions control formulation choice, timing and contraindications. Measured pH of relaxers, CHI relaxer directions, types of hydroxide actives and guanidine system chemistry and experimental sulfitolysis study
Worked selection. A client with a scratched scalp asks you to mix the two parts of a kit sold for sensitive scalps. The kit’s name does not clear the service. For example, the Design Essentials Sensitive Scalp Relaxer cream is classified for skin corrosion and serious eye damage. Defer until the scalp condition permits service and reevaluate the hair, then use the specified product and activator only as directed. Design Essentials product guide and manufacturer safety data
Screen for Chemical Compatibility
Do not apply a thio wave over previously hydroxide-relaxed lengths. Follow the new relaxer's restrictions on previous thio, perm, color and other products. Overlapping incompatible services can severely damage hair. Obtain the product and application history by zone, and defer when the manufacturer prohibits it or you cannot establish compatibility. Where the product permits the existing history and calls for a preliminary check, follow its method for assessing response. A test cannot identify an unknown prior formula or clear a prohibited overlap. CHI relaxer guidance and Zotos wave formula reference chart
What specific chemical transformation occurs during the lanthionization process when a hydroxide relaxer alters the cortex of the hair?
Two sulfur atoms are added to cysteine residues to synthesize cystine dimers
Disulfide bonds are temporarily hydrated into hydrogen bonds that reform upon cooling
The alkaline reaction can form a lanthionine cross-link with one sulfur atom in place of a link with two.
Hydroxide ions donate hydrogen atoms to reduce disulfide bonds into free sulfhydryl groups
A client with scalp abrasions asks for a two-part guanidine no-lye relaxer. What should the cosmetologist do?
Defer service. A guanidine no-lye formula can still burn injured skin.
Proceed because the calcium hydroxide cream loses all alkalinity when activated.
Apply the guanidine carbonate activator alone instead of mixing the kit.
Substitute a lithium hydroxide formula because it cannot irritate abrasions.
A client wants a thio soft curl service on lengths previously relaxed with sodium hydroxide. What is the appropriate decision?
Proceed after applying a thicker scalp base.
Substitute an acid wave with dryer heat.
Use a neutralizing shampoo to clear the old relaxer.
Decline the proposed service on the hydroxide-treated hair.
Sections you finish are checked off in the contents.