5.1 Cube Nets, Unfolding Patterns & Surface Development

Key Takeaways

  • A closed cube has six square faces, twelve edges and eight vertices.

  • In a valid cube net, two faces with exactly one intervening square along a straight strip become opposite.

  • Five hinges and seven paired seams make the twelve edges of a folded cube.

  • When matching a folded or unfolded drawing, keep the same surface, corner and edge for each mark.

  • Check whether the target has all of its faces or is intentionally open.

Last updated: November 2026

Cube Nets, Unfolding Patterns & Surface Development

Cube Net Fundamentals & Planar Topologies

The historical CFAT practice booklet includes two directions of spatial work: choosing a solid that can be folded from a pattern, and choosing the pattern obtained by unfolding a solid. When the exercise says the visible side of the paper will be the exterior, keep it outward as you trace edges and marks. First check whether the intended form is closed or has an opening.

A cube is a regular hexahedron with six congruent square faces, twelve edges, and eight vertices. Joining six squares edge to edge can produce 35 different planar shapes when rotations and reflections count as the same arrangement. Eleven of those shapes can fold into a cube without overlap. You can check a candidate by folding and tracing the six faces. You do not have to memorize the full list.

The 11 Valid Cube Net Families

The 11 valid cube nets are systematically classified into four distinct structural families by the arrangement of their rows when the longest straight strip is made horizontal:

Net FamilyNumber of NetsStructural ArrangementDefining Visual Characteristic
1-4-1 Group6 netsCentral row of 4 squares, flanked by 1 square on either sideThe classic Latin cross, T-shape, and offset crosses. The 4 central squares form the 4 lateral walls, while the single tabs fold into the top and bottom bases.
1-3-2 Group3 netsRow of 3 squares, flanked by 1 square on one side and 2 squares on the otherAsymmetric stepped configuration. The 2 connected side squares fold around a corner to complete the perimeter.
2-2-2 Group1 netThree offset tiers of 2 squares eachA balanced, symmetrical staircase pattern. Each two-square pair forms a perpendicular bend.
3-3 Group1 netTwo rows of 3, with one column of overlapThe rows run parallel and share one full-edge hinge.

Diagnosing Invalid Hexominoes

For a closed cube, check these structural conditions:

  1. The Row Length Limit: Any pattern containing 5 or 6 squares in a single continuous straight line is automatically invalid. A cube requires four lateral faces to form a closed perimeter; five squares in a row force the fifth square to double over the first, leaving an open side.
  2. The 2x2 Solid Cluster: Any pattern containing a solid 2×22 \times 2 block of four squares (or a 2×32 \times 3 block of six squares) cannot form a cube. At the middle of a filled two-by-two square, four face corners meet. A cube vertex joins only three faces, so these four squares cannot fold as that cluster.
  3. Same-Side Flanges: In a 1-4-1 configuration, if the two single tabs are located on the same side of the central four-square spine, the pattern is invalid. Both tabs will fold inward toward the same opening, leaving the opposing base completely exposed.
  4. Vertex-Only Connections: A corner touch is not a hinge. Check that all six faces are connected by chains of full-edge hinges.

The Opposite Face Rule

The opposite face rule lets you check a valid cube net before tracking positions of individual marks.

Core Axiom (The One-Square Skip): In any continuous straight row or column of squares within a valid cube net, faces separated by exactly one intervening square will always fold into mutually opposite (parallel) faces on the 3D cube.

Consider a standard linear row of four squares labeled consecutively from left to right as A, B, C, and D:

  • Face A and Face C are separated by Face B   ⟹  \implies A is opposite C.
  • Face B and Face D are separated by Face C   ⟹  \implies B is opposite D.
  • The two remaining tabs attached to the sides of the row (the top tab E and the bottom tab F) must fold to enclose the remaining pair of parallel planes   ⟹  \implies E is opposite F.

Geometric Implication for 3D Projections

A corner view of an opaque cube shows three faces that meet at a vertex. Other views may show fewer. Opposite faces share neither an edge nor a vertex, and a single exterior view cannot show the interiors of both opposite faces.

  • If an answer choice shows Face A and Face C at the same time: Eliminate it immediately. They are parallel and face away from each other.
  • If an answer choice shows Face B and Face D at the same time: Eliminate it immediately.
  • If an answer choice shows Face E and Face F at the same time: Eliminate it immediately.

Use this check first, then compare the specific marks and their placement on the surviving faces.


Corner Vertex Convergence & Edge Pairing

Once opposite-face violations have been eliminated, you must evaluate the remaining options by checking face adjacency and vertex convergence. When a flat net is folded, the exposed outer perimeter edges of the 2D pattern zip together to create the 12 edges and 8 vertices of the 3D cube.

Edge Zipping Mechanics

A valid cube net has five fold edges, each counted twice if you start from the four edges of each of its six squares. This leaves 24−2(5)=1424-2(5)=14 perimeter edges. When assembled into a closed cube, these 14 perimeter edges meet in 7 distinct pairs along the seams, which, combined with the 5 internal fold creases, yield the cube's 12 physical edges.

  • Hinges and seams: A shared edge between neighbouring squares in the flat net is a hinge. Two free edges that meet on closing the cube form a seam. Trace their positions on the solid to see which two free edges pair up.
  • Corner Vertex Triads: Every single vertex on a closed cube is formed by the convergence of exactly three square corners. If you trace three squares in the net that share a common junction or fold together at a corner, their corner angles must meet at a single point.

Tracking Patterned and Shaded Faces

The sample includes shaded face marks. In practice you can also use an arrow, an off-centre dot, a diagonal or a two-tone face. A candidate can show the right three faces and still place a mark at the wrong edge or vertex.

The 90° Fold Transformation

When a square turns about a crease, its mark travels with the square. There is no separate spin of the mark on the paper:

  • Crease Alignment Check: Identify what part of the symbol touches or points toward the fold crease in the flat net. For example, if the arrowhead of a directional arrow touches the crease shared with a striped square in the 2D net, that arrowhead must continue touching the same hinged edge in the folded 3D cube.
  • Corner Pointing Check: If the sharp apex of a black triangle points toward a corner where its face meets the face marked with a circle, it must point directly to that vertex in the folded solid. If an answer option shows the flat base of the triangle facing that vertex instead, the orientation is inverted.
  • Diagonal Stripe Continuity: Pay close attention to diagonal slashes. In an unfolded net, a diagonal line running from the top-left to bottom-right of a square meets specific outer perimeter corners. A diagonal from corner to corner still ends at those corners after folding. An option moving an end to the middle of an edge cannot match.

Check faces, junctions and marks

Use the following order when comparing candidate cubes:

[Step 1: Opposite Face Check] 
   -> Look for opposite face pairs. Use the one-square skip where a straight run is available.
   -> Scan candidate cubes. Eliminate ANY option displaying both members of an opposite pair.

[Step 2: Adjacency & Vertex Check]
   -> For surviving options, check if the 3 visible faces actually share a single corner vertex.
   -> Eliminate options displaying faces that cannot physically meet at a triad junction.

[Step 3: Symbol Orientation & Seam Alignment]
   -> Inspect the common seams and vertices between adjacent symbols.
   -> Check arrow directions, shading boundaries, and diagonal line terminations.
   -> Select the uniquely verified matching cube.

Worked Step-by-Step Example

Problem Representation

Consider an unfolded cube net arranged in a 1-4-1 Latin cross configuration:

          +-------+
          |   ▲   |  <-- Top Tab: Upward-pointing Triangle
          +-------+
  +-------+-------+-------+-------+
  |   O   |   ■   |   +   |   Z   |  <-- Central 4-Square Spine
  +-------+-------+-------+-------+
          +-------+
          |   D   |  <-- Bottom Tab: Black Dot
          +-------+
  • Top Tab: Triangle (▲) pointing upward (away from the seam with ■).
  • Central Spine (left to right):
    1. Hollow Circle (O)
    2. Solid Black Square (■)
    3. Plus Sign (+)
    4. Letter Z (Z)
  • Bottom Tab: Black Dot (D) attached below the Solid Black Square (■).

Step 1: Establish Opposite Pairs

  • Central spine skip: Circle (O) is opposite Plus (+).
  • Central spine skip: Solid Black (■) is opposite Letter Z (Z).
  • Flanking tabs: Triangle (▲) is opposite Black Dot (D).

Step 2: Evaluate 4 Candidate 3D Folded Cubes

  1. Candidate 1: Displays Circle (O), Plus (+), and Triangle (▲).
    • Analysis: Circle (O) and Plus (+) are opposite faces. They can never appear together. Eliminate Candidate 1 immediately.
  2. Candidate 2: Displays Solid Black (■), Letter Z (Z), and Black Dot (D).
    • Analysis: Solid Black (■) and Letter Z (Z) are opposite faces. They can never appear together. Eliminate Candidate 2 immediately.
  3. Candidate 3: Displays Triangle (▲), Black Dot (D), and Circle (O).
    • Analysis: Triangle (▲) and Black Dot (D) are opposite faces. They can never appear together. Eliminate Candidate 3 immediately.
  4. Candidate 4: Displays Triangle (▲), Solid Black (■), and Plus (+).
    • Analysis: No opposite pairs are present (Triangle is opposite Dot, Black is opposite Z, Plus is opposite Circle). All three visible faces share a valid corner vertex. Use the Solid Black (■) as the front, the Triangle (▲) as the top and Plus (+) as the right. The triangle points away from the shared front edge, so its base is nearer to the front edge than its tip. All alignments match the 2D net. Candidate 4 is the correct solution.

Unfold a form by choosing which edges stay joined

An unfolding question works in reverse. Pick one face to leave fixed. Decide which edges act as hinges and which edges are cut, then swing the other faces out until they share one plane. Keep track of which visible side of the drawing matches the exterior when assembled.

Triangular prism example. Imagine a closed right triangular prism with two identical triangular ends, each with sides of lengths 3, 4 and 5. The prism is 6 units long. Free the 3-unit and 4-unit edges of both triangular ends, leaving their 5-unit edges hinged. Then cut one long edge to open a band of three rectangular faces. Place the rectangles in the order 3×63\times6, 5×65\times6, 4×64\times6, with their 6-unit edges joined. Attach one triangular end to each 5-unit short edge of the middle rectangle.

CheckWhat must match
Rectangle bandIts free 6-unit edges meet to close the sides.
Two triangular endsOne is at each end of the band.
Triangle orientationEach triangle's 3-unit side meets the 3-unit short edge and its 4-unit side meets the 4-unit short edge.
An outside markAn arrow pointing toward one of those edges in the solid still points toward that edge in the net.

A candidate showing both triangles on the same end leaves the other end uncovered. Attaching a 4-unit side along a 5-unit edge fails the length check.

Open tray check. If the target is an open three-face corner, fix a square base and swing up squares attached to two adjacent edges of it. The two flap edges meet along a vertical seam. With flaps on opposite base edges, the two flaps become parallel and cannot meet at that seam. As in the historical sample, count the surfaces and check whether the solid has the intended openings before comparing its shape or pattern.

Test Your Knowledge

A valid cube net has a four-square row with one tab above and one below. What is true of two squares in that row separated by exactly one other square?

A

Faces separated by exactly one intervening square in the four-square row are mutually opposite and can never be visible simultaneously.

B

Any two faces that share an edge in the unfolded net will fold to become opposite faces on the three-dimensional cube.

C

The two single tabs extending from opposite sides of the central row must always fold into mutually adjacent perpendicular faces.

D

Faces situated at opposite ends of the four-square row fold to share a common vertex and remain visible together from any viewing angle.

Test Your Knowledge

An unfolded cube net features a central row of four squares labeled consecutively: Blank, Solid Black, Diagonal Stripe, and Five Dots. A top tab attached to the second square (Solid Black) contains an Arrow pointing toward the seam, and a bottom tab attached to the third square (Diagonal Stripe) contains a Hollow Circle. Which configuration of three visible faces is physically possible on the folded cube?

A

A cube showing the Blank face, Diagonal Stripe face, and Five Dots face simultaneously

B

A cube showing the Solid Black face, Diagonal Stripe face, and Arrow face with the Arrow pointing directly at the seam of the Solid Black face

C

A cube showing the Solid Black face, Five Dots face, and Hollow Circle face simultaneously

D

A cube showing the Arrow face and the Hollow Circle face directly touching along a shared edge

Test Your Knowledge

What happens to the boundary of a valid six-square net as it closes into a cube, and how many faces meet at each vertex?

A

The fourteen boundary edges alone make twelve cube edges, with two faces at each vertex

B

Twelve boundary edges form six seams, with four faces at each vertex

C

Fourteen boundary edges form seven seams, which join five hinge edges to make twelve cube edges. Three faces meet at each vertex.

D

Sixteen boundary edges form eight seams, with three faces at each of twelve vertices

Test Your Knowledge

A right triangular prism has triangular ends with side lengths 3, 4 and 5, and a 6-unit length. In an unfolded strip, the triangles attach to opposite ends of the 5-by-6 rectangle. What makes an attachment fit?

A

The triangle hinges along a 6-unit side

B

The triangle hinges on its 5-unit side and its other sides meet the short edges of corresponding lengths

C

The two triangles must overlap when unfolded

D

Either orientation will match the remaining unequal edges

Sections you finish are checked off in the contents.