8.1 Linear Equations, PEMDAS & Single-Variable Modeling
Key Takeaways
Define a variable with units, translate each condition, then simplify the equality to a form such as .
In PEMDAS, multiplication and division have equal priority and run from left to right, as do addition and subtraction.
Multiply every term on both sides by the same nonzero common denominator to clear constant denominators.
Test a proposed answer in the original conditions. Use its result to rule out other choices only when you know how the result changes with the input.
Distribute a negative factor to every term inside a group, as in .
Linear Equations, PEMDAS & Single-Variable Modeling
From a Word Problem to an Equation
When one quantity determines the others, name it and write every other quantity in terms of it. Then use the stated total or comparison to make an equation. For example, the number of parkas one company receives can determine the amounts for two other companies. The shipment total gives the equality that lets you solve for the first company’s allocation.
The Translation Dictionary: English to Algebra
Use the phrases in the table as clues. Read the whole sentence to decide whether it states an equality, an inequality or a rate and which quantity comes first.
| Verbal Phrase | Mathematical Meaning | Algebraic Operation | Translation Example |
|---|---|---|---|
| Is, was, will be, equals, totals, yields | Equivalence | "The total troop count is 72" | |
| Sum, increased by, more than, exceeds, added to | Addition | "8 more than twice the patrol size" | |
| Difference, decreased by, less than, deducted from | Subtraction | "6 litres less than baseline capacity" | |
| Product, times, of, fraction of | Multiplication | "Three-fifths of the ammunition cache" | |
| Quotient, ratio, out of, divided by, per | Division | or fraction bar | "Ratio of recruits to instructors" , for |
The Critical "Less Than" Subtraction Trap
Keep the starting quantity and the amount deducted in order. In English, "subtract from " or " less than " means the starting quantity is , from which is deducted:
- "5 less than " translates to , never .
- "7 subtracted from three times " translates to . Compare “5 less than ,” which names a quantity, with “ is less than 5,” which states an inequality.
Operational Order: The PEMDAS Framework
Use the order of operations (PEMDAS or BODMAS) when evaluating expressions on either side of an equality. Keep the grouping when distributing a factor or substituting a value.
Remember that multiplication does not take precedence over division, nor does addition over subtraction. Each pair holds equal priority and must be evaluated in order of appearance from left to right. For example, in , division appears first: , and . Calculating first would erroneously yield .
Solving Single-Variable Equations Step-by-Step
A one-variable linear equation can be written as after combining terms. Add or subtract the same quantity on both sides, or multiply or divide both sides by the same nonzero constant, to preserve the set of solutions.
Step-by-Step Isolation Protocol
- Clear Parentheses via Distribution: Multiply outside coefficients across all terms within parentheses:
- Combine Like Terms: Group variable terms together and constant numerical terms together on each individual side.
- Shift Variables to One Side: Add or subtract variable terms so that the unknown appears on only one side of the equation.
- Shift Constants to the Opposite Side: Use inverse addition or subtraction to move numerical values to the other side.
- Isolate the Variable: Divide both sides by the coefficient of if it is nonzero. If the coefficient is zero, check the remaining equality. A true statement permits every value in the domain. A false statement permits none.
- Sanity Check: Substitute the value into the original equality. Check any restrictions from the setting, such as a whole number of items.
Equations with Fractions: The LCD Clearing Technique
With constant denominators, you can multiply every term on both sides by a nonzero common multiple of the denominators. Using the least common denominator (LCD) keeps the multiplier small.
Consider the following equation:
- Identify the LCD: The denominators are 4, 6, and 3. The least common multiple of these numbers is 12.
- Multiply Every Term by 12:
- Simplify Before Expanding:
- Distribute and Combine Like Terms:
- Solve for :
Check in the original equation: .
Checking an Answer by Substitution
If the exercise gives numerical choices, you can test a value in the original conditions. The candidate must satisfy every condition, including any restrictions on the possible values.
When the predicted total strictly increases with the candidate, a total below the target rules out that candidate and all smaller values. A total above the target rules out that candidate and all larger values. Reverse the rule if the predicted total strictly decreases. Choose by numerical value even when the options are unsorted. If you cannot establish a consistent direction, test candidates individually or solve the equation directly.
Common Traps and Negative Coefficient Traps
1. The Negative Distribution Sign Flip
When a subtraction sign precedes a parenthetical group, the negative sign must be distributed to every term inside: Check the sign of each product before combining terms.
2. Partial Term Clearing
When clearing denominators with an LCD or multiplying an entire equation by a scalar, test-takers often forget to multiply standalone integer constants. In the equation , multiplying by 4 requires multiplying the 3 as well: Multiplying only the fraction to get or changes the equation.
Worked Modeling Examples
Example 1: Multi-Unit Logistics Allocation
Scenario: In this practice scenario, a supply depot receives a shipment of 470 cold-weather parkas distributed among three infantry companies: Alpha, Bravo, and Charlie. Company Bravo receives 30 more parkas than Company Alpha. Company Charlie receives 40 fewer parkas than twice Company Alpha. How many parkas does Company Alpha receive?
Step 1: Define Variables in Terms of a Single Baseline: Let Company Alpha's allocation be .
- Alpha:
- Bravo:
- Charlie:
Step 2: Construct the Linear Equation: The sum of all three allocations must equal the total shipment:
Step 3: Combine Like Terms and Solve: Company Alpha receives 120 parkas.
Step 4: Verify:
- Alpha: 120
- Bravo:
- Charlie: Total: parkas. The numbers match the shipment total exactly.
Example 2: Fuel Consumption Problem Solved via Backsolving
Scenario: A vehicle used 145 litres of diesel over a three-day trip. On the second day, the vehicle consumed 15 litres more than on the first day. On the third day, the vehicle used twice as much fuel as on the first day. How many litres of diesel were consumed on the first day? Answer options: 25 L, 32.5 L, 40 L, 50 L.
Backsolving using 32.5 L:
- Day 1: 32.5 L
- Day 2: L
- Day 3: L Total: L. The totals match. Let denote first-day use in litres. The formula shows that the total rises as first-day use increases. Testing 25 L would give 115 L, so the choices at or below 25 L could be discarded.
Checks to Use During Practice
- Tip 1: Label Your Variables with Meaningful Letters. Instead of defaulting to and , use initial letters like for Alpha, for Day 1, or for satellite transceivers. This prevents solving for and mistakenly answering with the wrong entity's value.
- Tip 2: Identify the Target Question. A question may ask for a quantity derived from your variable (e.g., "What was the combined cost of the laptops?" or "How many parkas did Charlie receive?"). Circle or underline what the question actually asks for before choosing an option.
- Tip 3: Clear Denominators in Step One. If you use the LCD, multiply every term including constants, then check the solution in the original equality.
An army signals detachment ordered 3 satellite transceivers and 5 rugged field laptops for a combined cost of $17,500. If each rugged field laptop costs $1,500 more than a satellite transceiver, what is the cost of a single satellite transceiver?
$1,250
$1,500
$2,000
$2,750
Solve the linear equation for : .
Solve for by clearing denominators: .
Sections you finish are checked off in the contents.