7.2 Ratios, Proportions & Unit Rate Conversions

Key Takeaways

  • A part-to-part ratio compares two groups, while a part-to-whole ratio uses their entire total when those groups exhaust it.

  • Scale every term by the same factor to preserve a ratio.

  • Direct variation has a constant quotient for nonzero inputs. Inverse variation has a constant product.

  • Convert units before applying a map scale or comparing rates.

Last updated: November 2026

Ratios, Proportions & Unit Rate Conversions

Structural Logic of Ratios: Part-to-Part vs. Part-to-Whole

In military problem solving, resources, manpower, and supplies are rarely allocated in isolation; they are distributed according to operational ratios. A ratio is a mathematical comparison of two or more quantities expressing their relative magnitude. Ratios can be formatted using colons (A:BA : B), fraction notation (AB\frac{A}{B}), or descriptive phrasing ("AA to BB").

Distinguish part-to-part from part-to-whole relationships. In this example the two groups are distinct and together make up the entire group under discussion:

  • Part-to-Part: Compares one subgroup directly to another subgroup. For example, if a field ambulance unit has 3 Medical Technicians for every 2 Nursing Officers, the part-to-part ratio is 3:23 : 2.
  • Part-to-Whole: Compares a specific subgroup to the aggregate total. In the unit above, the whole consists of 3+2=53 + 2 = 5 parts. Medical Technicians constitute 35\frac{3}{5} (60%60\%) of the unit, while Nursing Officers constitute 25\frac{2}{5} (40%40\%).
Ratio FormNotationInterpretation in Tactical ContextFraction Representation
Part-to-PartA:B=4:5A : B = 4 : 54 vehicles of type A for every 5 vehicles of type BA/B=4/5A/B=4/5
Part-to-Whole (A)A:(A+B)=4:9A : (A + B) = 4 : 9Type A makes up 4 out of every 9 vehicles in the two groups49≈44.4%\frac{4}{9} \approx 44.4\% of fleet
Part-to-Whole (B)B:(A+B)=5:9B : (A + B) = 5 : 9Type B makes up 5 out of every 9 vehicles in the two groups59≈55.6%\frac{5}{9} \approx 55.6\% of fleet

The Multiplier Method (kk-Method)

When a positive total is split among disjoint groups and the ratio of their sizes is known, give each ratio term the same scale factor kk. The sum of the algebraic terms must equal the given total:

a⋅k+b⋅k=Total  ⟹  k=Totala+ba \cdot k + b \cdot k = \text{Total} \implies k = \frac{\text{Total}}{a + b}

Once kk is calculated, multiply each original ratio term by kk to obtain the actual quantities.

Proportion Equations & High-Speed Cross-Multiplication Shortcuts

A proportion states that two ratios are equal. The denominators must be nonzero:

ab=cd\frac{a}{b} = \frac{c}{d}

By fundamental algebraic properties, the product of the extremes equals the product of the means:

a⋅d=b⋅ca \cdot d = b \cdot c

Solving for an unknown variable xx in ab=xd\frac{a}{b} = \frac{x}{d} gives x=a⋅dbx = \frac{a \cdot d}{b}.

The Strategic Cancellation Shortcut

Solving 2456=x140\frac{24}{56}=\frac{x}{140} gives x=24×14056x=\frac{24\times140}{56}. Reduce 2456\frac{24}{56} to 37\frac37. Then divide 140 by 7 before multiplying by 3. This gives x=60x=60. Check that 60/14060/140 reduces to 3/73/7.

Scale both terms when reducing a single ratio. To scale one side of an equation without changing its solution, perform the same operation on the other side. In the product above, cancelling a common factor between the numerator and denominator is valid because it preserves the fraction’s value.

Multi-Term Ratios (Three or More Components)

Real-world logistical allocations frequently involve three or more components (A:B:CA : B : C). The multiplier methodology generalizes directly:

  1. Sum all terms in the ratio: Total Parts=A+B+C\text{Total Parts} = A + B + C.
  2. Compute the value of one part: k=Aggregate QuantityTotal Partsk = \frac{\text{Aggregate Quantity}}{\text{Total Parts}}.
  3. Distribute kk across each term: QuantityA=A⋅k\text{Quantity}_A = A \cdot k, QuantityB=B⋅k\text{Quantity}_B = B \cdot k, and QuantityC=C⋅k\text{Quantity}_C = C \cdot k.

Combining Linked Two-Term Ratios

A practice problem can give two ratios that share a group, such as A:B=2:3A : B = 2 : 3 and B:C=4:5B : C = 4 : 5, and require finding the unified ratio A:B:CA : B : C.

  • Step 1: Identify the common linking variable (BB).
  • Step 2: Find the Least Common Multiple (LCM) of the two values assigned to BB (here, LCM(3,4)=12\text{LCM}(3, 4) = 12).
  • Step 3: Scale both ratios so BB matches the LCM: A:B=(2×4):(3×4)=8:12A : B = (2 \times 4) : (3 \times 4) = 8 : 12 B:C=(4×3):(5×3)=12:15B : C = (4 \times 3) : (5 \times 3) = 12 : 15
  • Step 4: Unify the terms: A:B:C=8:12:15A : B : C = 8 : 12 : 15.

Direct Variation vs. Inverse Variation

Recognizing whether a scenario involves direct or inverse variation is critical to avoid setting up inverted equations.

Direct Variation

In direct variation, y=kxy=kx for a constant kk. For nonzero xx, the ratio y/xy/x equals kk:

y1x1=y2x2  ⟺  y=k⋅x\frac{y_1}{x_1} = \frac{y_2}{x_2} \iff y = k \cdot x

Examples include fuel used versus distance at unchanged fuel use per kilometre, and cost versus weight at a fixed unit price.

Inverse Variation

In inverse variation, the product xyxy is fixed. For a nonzero positive xx and positive product, doubling xx halves yy:

x1⋅y1=x2⋅y2=k  ⟺  y=kxx_1 \cdot y_1 = x_2 \cdot y_2 = k \iff y = \frac{k}{x}

Examples include speed versus travel time over a fixed distance, and crew size versus time for a fixed amount of parallel work when each crew member works at a constant rate.

DimensionDirect VariationInverse Variation
Governing RelationshipQuotient is constant: yx=k\frac{y}{x} = kProduct is constant: x⋅y=kx \cdot y = k
Core Equationy1x1=y2x2\frac{y_1}{x_1} = \frac{y_2}{x_2}x1y1=x2y2x_1 y_1 = x_2 y_2
Mental Heuristic"More yields more" (double x  ⟹  x \implies double yy)"More yields less" (double x  ⟹  x \implies halve yy)
Common TrapsInverting the comparison termsApplying direct cross-multiplication to crew-work problems

Unit Rates & Logistical Conversions

A unit rate is a ratio where the second quantity (denominator) is standardized to 1 unit. Examples include kilometres per hour, cost per kilogram, and rounds per minute. Litres per 100 kilometres is a rate reported over 100 units of distance. Divide its stated value by 100 to express it per kilometre.

When converting between metric units in rate problems:

  • 1 kilometre (km)=1,000 metres (m)=100,000 centimetres (cm)1\text{ kilometre (km)} = 1,000\text{ metres (m)} = 100,000\text{ centimetres (cm)}.
  • 1 kilogram (kg)=1,000 grams (g)1\text{ kilogram (kg)} = 1,000\text{ grams (g)}.
  • 1 hour=60 minutes=3,600 seconds1\text{ hour} = 60\text{ minutes} = 3,600\text{ seconds}.

Compare two distances over the same elapsed time

The historical CFAT practice booklet includes a distance comparison for two objects moving over the same time. In an original example, a cart moves 12 m while a conveyor moves a package 20 m. Both maintain their own constant speeds. In any equal interval, the cart then covers 12/20=3/512/20=3/5 of the package's distance. When the package moves 55 m, the cart goes (3/5)×55=33(3/5)\times55=33 m. The ratio depends on the two speeds staying constant. The time intervals for the pair of distances must match.

Topographic Map Scales & Tactical Land Navigation Scaling

In military land navigation, topographical maps represent terrain features reduced according to a specific Representative Fraction (RF). Always read the scale printed on the map. On a map marked 1:50,0001:50,000, the following conversions apply.

This ratio means 1 unit of measurement on the map represents 50,000 identical units on the actual ground:

  • 1 cm on map=50,000 cm on ground1\text{ cm on map} = 50,000\text{ cm on ground}.
  • Convert centimetres to metres: 50,000 cm÷100=500 metres50,000\text{ cm} \div 100 = 500\text{ metres}.
  • Convert metres to kilometres: 500 m÷1,000=0.5 kilometres500\text{ m} \div 1,000 = 0.5\text{ kilometres}.

Fast Navigation Conversion Rules for 1:50,0001 : 50,000 Maps

  • Map Centimetres to Ground Kilometres: Multiply map centimetres by 0.50.5 (or divide by 2). 14.6 cm×0.5 km1 cm=7.3 km14.6\text{ cm} \times \frac{0.5\text{ km}}{1\text{ cm}} = 7.3\text{ km}
  • Ground Kilometres to Map Centimetres: Multiply ground kilometres by 22. 18 km×2 cm1 km=36 cm on map18\text{ km} \times \frac{2\text{ cm}}{1\text{ km}} = 36\text{ cm on map}
  • Map Millimetres to Ground Metres: Multiply map millimetres by 5050. 7 mm×50=350 m7\text{ mm} \times 50 = 350\text{ m}

For a map marked 1:25,0001:25,000:

  • 1 cm on map=250 metres=0.25 km1\text{ cm on map} = 250\text{ metres} = 0.25\text{ km} (multiply ground kilometres by 4 to get map centimetres).

Step-by-Step Worked allocation and work examples

Problem 1: Three-Term Logistic Distribution

A logistics depot receives 1,680 artillery shells to allocate among three frontline batteries (AA, BB, and CC) in the ratio 3:4:73 : 4 : 7. How many shells does Battery BB receive?

  • Step 1: Calculate the sum of ratio parts: Total Parts=3+4+7=14 parts\text{Total Parts} = 3 + 4 + 7 = 14\text{ parts}
  • Step 2: Calculate the multiplier kk: k=1,68014=120 shells per partk = \frac{1,680}{14} = 120\text{ shells per part}
  • Step 3: Compute Battery BB's allocation (4 parts): AllocationB=4×120=480 shells\text{Allocation}_B = 4 \times 120 = 480\text{ shells}

Problem 2: Work Crew / Trench Excavation (Inverse Variation)

In a practice model, 10 people working at the same constant individual rate can complete a fixed job in 12 hours. Assume they can divide the work freely with no setup delays. If all 16 people start together at that same rate, how long will it take?

  • Step 1: Identify variation type: Each worker adds the same constant rate on a fixed job   ⟹  \implies inverse variation (x1y1=x2y2x_1 y_1 = x_2 y_2).
  • Step 2: Compute total sapper-hours required: 10 sappers×12 hours=120 sapper-hours10\text{ sappers} \times 12\text{ hours} = 120\text{ sapper-hours}
  • Step 3: Determine the expanded crew size: 10+6=16 sappers10 + 6 = 16\text{ sappers}
  • Step 4: Calculate new completion time: Time=120 sapper-hours16 sappers=304=7.5 hours (7 hours 30 minutes)\text{Time} = \frac{120\text{ sapper-hours}}{16\text{ sappers}} = \frac{30}{4} = 7.5\text{ hours (7 hours 30 minutes)}

Checks for ratio problems

  • Tip 1: Double-Check Part vs. Whole. If told "men to women is 3:53 : 5", the fraction that is women is 5/85/8 if the two groups make up the whole. The women-to-men ratio would be 5:35:3.
  • Tip 2: Identify Inverse Relationships Instantly. Use x1y1=x2y2x_1y_1=x_2y_2 after checking that the product is constant. For example, speed times time is constant across two trips only when their total distances are the same.
  • Tip 3: The 0.5 Rule for 1:50,000 Maps. Remember: on a 1:50,000 map, every 2 cm equals exactly 1 km. Halve the centimetre measurement to get kilometres on the ground.
Test Your Knowledge

A logistics battalion must distribute 1,200 crates of composite rations among three forward bases in the ratio 2 : 3 : 5. How many ration crates does the largest base receive?

A

240 crates

B

360 crates

C

480 crates

D

600 crates

Test Your Knowledge

A fixed job takes 8 engineers working together 15 hours. All engineers have the same constant individual rate, and the work can be split with no delays. How many engineers starting together would finish in 6 hours?

A

20 engineers

B

16 engineers

C

24 engineers

D

18 engineers

Test Your Knowledge

A topographic map is marked 1 : 50,000. A measured route on the map is 14.6 cm long. What ground distance does that map measurement represent?

A

2.92 km

B

7.30 km

C

14.60 km

D

29.20 km

Sections you finish are checked off in the contents.