9.1 Rate, Time & Distance Relationships ($D = r \times t$)

Key Takeaways

  • For a constant speed rr, D=rtD=rt. Divide by positive elapsed time to find speed, or by positive speed to find the time to cover a given distance.

  • Use total distance divided by total elapsed time. For two equal-distance legs with positive speeds and no separate stop, this gives 2r1r2/(r1+r2)2r_1r_2/(r_1+r_2).

  • Along the same line, add speed magnitudes when two objects approach or move apart in opposite directions.

  • Subtract the slower speed from the faster speed when the faster object is behind the slower one on the same route.

  • For a direct headwind or tailwind, combine velocities along the path. Treat a crosswind as a vector with a sideways component.

Last updated: November 2026

Rate, Time & Distance Relationships (D=r×tD = r \times t)

The Fundamental Motion Triangle

For motion at a constant speed, distance travelled is speed multiplied by elapsed time. The same relation describes one leg when you know its average speed.

Distance=Rate×Time\text{Distance} = \text{Rate} \times \text{Time}

D=r×tD = r \times t

For positive time, divide distance by time. For positive speed, divide distance by speed:

r=Dtandt=Drr = \frac{D}{t} \quad \text{and} \quad t = \frac{D}{r}

In the motion triangle, DD goes above the two quantities rr and tt:

  • To find Distance, multiply the two base components: D=r×tD = r \times t.
  • To find Rate, divide the apex by the remaining base variable: r=Dtr = \frac{D}{t}.
  • To find Time, divide the apex by the rate: t=Drt = \frac{D}{r}.

Use compatible units for rate and time. If a convoy travels at a rate expressed in kilometres per hour (km/h\text{km/h}), elapsed time must be expressed in hours (h\text{h}), producing a distance in kilometres (km\text{km}).


Convert Elapsed Time and Speed

Divide minutes by 60 to obtain hours if the speed is in kilometres per hour, or divide the speed by 60 to obtain kilometres per minute. Keep the fraction if its decimal repeats.

Common Minute-to-Hour Equivalencies

These conversions use 60 minutes per hour:

Elapsed MinutesFraction of an HourDecimal EquivalentMental Calculation Rule
6 minutes660=110 h\frac{6}{60} = \frac{1}{10} \text{ h}0.10 h0.10 \text{ h}Divide by 10
10 minutes1060=16 h\frac{10}{60} = \frac{1}{6} \text{ h}≈0.167 h\approx 0.167 \text{ h}Divide by 6
12 minutes1260=15 h\frac{12}{60} = \frac{1}{5} \text{ h}0.20 h0.20 \text{ h}Divide by 5 (or double and divide by 10)
15 minutes1560=14 h\frac{15}{60} = \frac{1}{4} \text{ h}0.25 h0.25 \text{ h}Quarter of an hour
20 minutes2060=13 h\frac{20}{60} = \frac{1}{3} \text{ h}≈0.333 h\approx 0.333 \text{ h}One-third of an hour
30 minutes3060=12 h\frac{30}{60} = \frac{1}{2} \text{ h}0.50 h0.50 \text{ h}Half an hour
40 minutes4060=23 h\frac{40}{60} = \frac{2}{3} \text{ h}≈0.667 h\approx 0.667 \text{ h}Two-thirds of an hour
45 minutes4560=34 h\frac{45}{60} = \frac{3}{4} \text{ h}0.75 h0.75 \text{ h}Three-quarters of an hour
50 minutes5060=56 h\frac{50}{60} = \frac{5}{6} \text{ h}≈0.833 h\approx 0.833 \text{ h}Five-sixths of an hour

Velocity Conversions: Metric and Maritime Standards

  • Kilometres per hour to metres per second: To convert km/h\text{km/h} into m/s\text{m/s}, multiply by 518\frac{5}{18} (or divide by 3.63.6). Conversely, multiply m/s\text{m/s} by 185\frac{18}{5} (or 3.63.6) to return to km/h\text{km/h}. For instance, a vehicle moving at 72 km/h72 \text{ km/h} moves at 72×518=4×5=20 m/s72 \times \frac{5}{18} = 4 \times 5 = 20 \text{ m/s}.
  • Nautical speed (Knots): One knot is exactly one nautical mile per hour, or 1.852 km/h1.852 \text{ km/h}.

The Average Speed Trap & The Harmonic Mean

Use total distance and elapsed time for any trip. If the question includes a stop, the stop contributes time and zero distance.

Why the Arithmetic Mean Fails

Suppose a tactical vehicle drives 120 km outbound at 40 km/h40 \text{ km/h} and returns along the same 120 km route at 60 km/h60 \text{ km/h} with no stop between the legs. The intuitive—and incorrect—impulse is to calculate the simple arithmetic mean:

40+602=50 km/h(INCORRECT)\frac{40 + 60}{2} = 50 \text{ km/h} \quad (\text{INCORRECT})

This calculation fails because average speed is fundamentally defined as total distance divided by total time:

Average Speed=Total DistanceTotal Time\text{Average Speed} = \frac{\text{Total Distance}}{\text{Total Time}}

Because the vehicle travels slower during the outbound leg, it spends significantly more time traveling at 40 km/h40 \text{ km/h} than at 60 km/h60 \text{ km/h}:

  • Outbound time: t1=120 km40 km/h=3.0 hourst_1 = \frac{120 \text{ km}}{40 \text{ km/h}} = 3.0 \text{ hours}.
  • Inbound time: t2=120 km60 km/h=2.0 hourst_2 = \frac{120 \text{ km}}{60 \text{ km/h}} = 2.0 \text{ hours}.
  • Total distance: 120+120=240 km120 + 120 = 240 \text{ km}.
  • Total elapsed time: 3.0+2.0=5.0 hours3.0 + 2.0 = 5.0 \text{ hours}.
  • True average speed: 240 km5.0 hours=48 km/h\frac{240 \text{ km}}{5.0 \text{ hours}} = 48 \text{ km/h}.

The Harmonic Mean Shortcut

If both legs cover the same positive distance at positive speeds, with no extra time between legs, the distance cancels in 2d/(d/r1+d/r2)2d/(d/r_1+d/r_2). This gives the harmonic mean:

Average Speed=2r1r2r1+r2\text{Average Speed} = \frac{2 r_1 r_2}{r_1 + r_2}

Applying this shortcut to our values:

Average Speed=2×40×6040+60=4800100=48 km/h\text{Average Speed} = \frac{2 \times 40 \times 60}{40 + 60} = \frac{4800}{100} = 48 \text{ km/h}

For different positive speeds over equal distances, the resulting average is strictly below the simple average of those speeds. For equal speeds, the two means coincide. For equal travel times and no additional stop, the simple average applies.


Relative Motion Scenarios

For straight-line motion, draw both starting positions and show which way each object is moving. The relevant rate tells you how quickly the gap changes.

1. Opposite Directions (Converging or Diverging)

When two objects move toward or away from each other along the same line with constant speeds, the gap changes at the sum of their speeds:

rcombined=r1+r2r_{\text{combined}} = r_1 + r_2

Here DD is the amount by which the gap must change: the starting gap for a meeting, or the target gap minus the initial gap when separating. If the combined speed is positive, the time is:

t=Dr1+r2t = \frac{D}{r_1 + r_2}

Scenario Example: Two military supply trucks depart simultaneously from bases 350 km apart, traveling toward each other along the same highway. Truck Alpha travels at 45 km/h45 \text{ km/h} and Truck Bravo travels at 55 km/h55 \text{ km/h}.

  • Combined closing speed: 45+55=100 km/h45 + 55 = 100 \text{ km/h}.
  • Time until rendezvous: t=350 km100 km/h=3.5 hourst = \frac{350 \text{ km}}{100 \text{ km/h}} = 3.5 \text{ hours} (3 hours 30 minutes).

2. Same Direction (The Chase or Intercept Scenario)

When a faster object starts behind a slower one and both keep constant speeds in the same direction on the same route, the gap closes by their speed difference per unit of time:

rrelative=rfaster−rslowerr_{\text{relative}} = r_{\text{faster}} - r_{\text{slower}}

Measure intercept time from when the pursuer starts:

tintercept=Head Start Distancerfaster−rslowert_{\text{intercept}} = \frac{\text{Head Start Distance}}{r_{\text{faster}} - r_{\text{slower}}}

Scenario Example: A patrol craft departs harbour cruising at 20 km/h20 \text{ km/h}. Two hours later, a rapid response interceptor departs the same harbour in the same direction at 35 km/h35 \text{ km/h}.

  • Head start distance: 20 km/h×2 h=40 km20 \text{ km/h} \times 2 \text{ h} = 40 \text{ km}.
  • Relative catch-up speed: 35−20=15 km/h35 - 20 = 15 \text{ km/h}.
  • Time to catch up: t=4015=83 hours=2 hours and 40 minutest = \frac{40}{15} = \frac{8}{3} \text{ hours} = 2 \text{ hours and } 40 \text{ minutes}.

Environmental Motion: Wind and Water Current Assistance

Velocity over the ground is the vehicle’s velocity relative to the water or air plus the velocity of that medium relative to the ground. The following scalar formulas apply when the current or wind is directly along the route. Use vectors when there is a crosswind or cross-current.

  • Downstream / Tailwind (Assisted): The medium's speed adds to the vehicle's speed through the water or air: reffective=rvehicle+rcurrentr_{\text{effective}} = r_{\text{vehicle}} + r_{\text{current}}
  • Upstream / Headwind (Opposed): The medium's speed subtracts from the vehicle's speed through the water or air. Upstream or upwind progress requires the difference to be positive: reffective=rvehicle−rcurrentr_{\text{effective}} = r_{\text{vehicle}} - r_{\text{current}}

Isolating Vehicle and Current Speeds

If the vehicle holds the same speed through the medium on both legs and the aligned current or wind keeps the same magnitude, add and subtract the groundspeed equations:

rvehicle=rwith+ragainst2(Arithmetic Mean)r_{\text{vehicle}} = \frac{r_{\text{with}} + r_{\text{against}}}{2} \quad (\text{Arithmetic Mean})

rcurrent=rwith−ragainst2(Half the Difference)r_{\text{current}} = \frac{r_{\text{with}} - r_{\text{against}}}{2} \quad (\text{Half the Difference})


Motion Archetypes Quick-Reference

Problem CategoryOperational SetupPrimary FormulaExam Pitfall
Round Trip AverageEqual distances at positive speeds, no separate stopAvg=2r1r2r1+r2\text{Avg} = \frac{2 r_1 r_2}{r_1 + r_2}Use elapsed times for unequal distances or a separate stop
Opposite DirectionVehicles approaching or separating on the same linet=Dr1+r2t = \frac{D}{r_1 + r_2}DD is the change in their separation
Chase / PursuitPursuer starts behind and r1>r2r_1>r_2t=Lead Distancer1−r2t = \frac{\text{Lead Distance}}{r_1 - r_2}Use the gap at the pursuer’s start
Current or WindDirect headwind/tailwind or upstream/downstream; rv>rcr_v>r_crdown=rv+rcr_{\text{down}} = r_v + r_c, rup=rv−rcr_{\text{up}} = r_v - r_cDistinguish groundspeed from speed through the medium

Checks to Use During Practice

  • Compare rates and times in matching units before cancelling them.
  • For two equal distances at different positive speeds with no extra stop, check that the trip average falls between the two speeds and below their midpoint.
  • Mark departures and stops on a timeline. If two vehicles meet, verify that both equations put them at the same position at that time.
Test Your Knowledge

A van travels 90 km at 45 km/h, stops for 30 minutes, and then travels another 60 km at 60 km/h. What is its average speed from the first departure to the final arrival?

A

About 42.9 km/h

B

50 km/h

C

52.5 km/h

D

30 km/h

Test Your Knowledge

A tactical reconnaissance patrol departs headquarters traveling north at a steady speed of 50 km/h. Exactly 1 hour and 30 minutes later, an armored response vehicle departs from the same headquarters along the identical route at 80 km/h to deliver urgent mission intelligence. How long after the armored response vehicle departs will it intercept the reconnaissance patrol?

A

2 hours

B

2 hours 30 minutes

C

3 hours

D

1 hour 45 minutes

Test Your Knowledge

An aircraft flies a 1,200 km route in 2 hours with a direct tailwind and returns over the same route in 3 hours with the same wind as a direct headwind. The aircraft maintains the same speed relative to the air on both legs. What is the wind speed?

A

50 km/h

B

80 km/h

C

100 km/h

D

120 km/h

Sections you finish are checked off in the contents.