9.3 Mixture, Solution Concentration & Unit Cost Problems

Key Takeaways

  • For masses measured in the same units and mass fractions of the same solute, Q1C1+Q2C2Q_1C_1+Q_2C_2 is the combined solute mass if none is lost.

  • An additive blend with positive total quantity has weighted average Ct=(Q1C1+Q2C2)/(Q1+Q2)C_t=(Q_1C_1+Q_2C_2)/(Q_1+Q_2).

  • Pure solvent contributes zero of the chosen solute. Pure solute has mass fraction 1.

  • For an interior target, the ratio lower-strength to higher-strength is (Ch−Ct):(Ct−Cl)(C_h-C_t):(C_t-C_l).

  • A weighted average of distinct values with two positive contributions is strictly between those values.

Last updated: November 2026

Mixture, Solution Concentration & Unit Cost Problems

Track the Quantity and the Solute Separately

Check how the percentages are defined. These exercises use mass fractions, which give the mass of a chosen solute divided by the mass of the whole solution. If no material enters or leaves except for the stated additions, and the solute does not react, the masses and solute amounts add:

  1. Combined mass: Qtotal=Q1+Q2Q_{\text{total}}=Q_1+Q_2.
  2. Combined mass of the chosen solute: QtotalCfinal=Q1C1+Q2C2Q_{\text{total}} C_{\text{final}}=Q_1C_1+Q_2C_2.

Use the same mass units throughout, and express all concentrations on the same basis. If an exercise uses liquid volumes instead, apply this setup only if it gives an additive volume model and a compatible concentration measure. Solution volumes can change on mixing. A unit-cost problem uses purchase costs in place of solute mass, provided there are no extra costs or losses.


The Fundamental Mixture Equation

By equating the total active content before and after mixing, we obtain the weighted-average equation for this model:

Q1C1+Q2C2=(Q1+Q2)CfinalQ_1 C_1 + Q_2 C_2 = (Q_1 + Q_2) C_{\text{final}}

Divide by the positive combined quantity to find the blended concentration or unit cost:

Cfinal=Q1C1+Q2C2Q1+Q2C_{\text{final}} = \frac{Q_1 C_1 + Q_2 C_2}{Q_1 + Q_2}

This expression demonstrates that the final concentration is simply the weighted average of the individual concentrations, with each component weighted by its share of the combined quantity.

Diverse Contexts for the Variable CC

Problem ContextMeaning of QQ (Quantity)Meaning of CC (Concentration / Rate)Active Element Equation (Q×CQ \times C)
SolutionsMass of solution (kg, g)Mass fraction of a named soluteMass of that solute
CoolantMass of coolant (kg)Mass fraction of glycolKilograms of glycol
Metallurgy / AlloysMass of metal (kg, g)Mass fraction of the chosen metalKilograms of pure metal
Commodity PricingMass or unit count (kg or packs)Cost per matching unitTotal purchase cost

Dilution and Concentration Adjustments

When adding solvent or solute, first identify how much of the chosen solute the addition contributes.

1. Diluting by Adding Pure Water (Solvent)

When the chosen solute is a dissolved substance other than water, the added pure water has solute mass fraction zero. In this model:

QinitialCinitial+Qwater(0)=(Qinitial+Qwater)CfinalQ_{\text{initial}} C_{\text{initial}} + Q_{\text{water}}(0) = (Q_{\text{initial}} + Q_{\text{water}}) C_{\text{final}}

QinitialCinitial=(Qinitial+Qwater)CfinalQ_{\text{initial}} C_{\text{initial}} = (Q_{\text{initial}} + Q_{\text{water}}) C_{\text{final}}

Example: A lab has 40 kg of a solution that is 80% glycerol by mass. How much water is needed to make it 50% glycerol by mass?

  • Glycerol initially present: 40 kg×0.80=32 kg40 \text{ kg} \times 0.80 = 32 \text{ kg}.
  • Final mass equation: 32=0.50×(40+Qwater)32 = 0.50 \times (40 + Q_{\text{water}}).
  • Solve for QwaterQ_{\text{water}}: 32=20+0.50Qwater  ⟹  12=0.50Qwater  ⟹  Qwater=24 kg32 = 20 + 0.50 Q_{\text{water}} \implies 12 = 0.50 Q_{\text{water}} \implies Q_{\text{water}} = 24 \text{ kg}.

2. Strengthening by Adding Pure Solute

If the added material is the pure solute, its mass fraction is 1. If the added material is another solution, use its stated fraction:

QinitialCinitial+Qadded(1.00)=(Qinitial+Qadded)CfinalQ_{\text{initial}} C_{\text{initial}} + Q_{\text{added}}(1.00) = (Q_{\text{initial}} + Q_{\text{added}}) C_{\text{final}}


The Alligation Method: The Fast Ratio Shortcut

For two different strengths and a target strictly between them, rearrange the weighted mean: Ql(Ct−Cl)=Qh(Ch−Ct)Q_l(C_t-C_l)=Q_h(C_h-C_t). This gives a ratio instead of an absolute mass.

The Alligation Cross Structure

  1. Write the higher concentration (ChighC_{\text{high}}) and lower concentration (ClowC_{\text{low}}) on the left.
  2. Place the desired target concentration (CtargetC_{\text{target}}) in the center.
  3. Subtract along the diagonals to obtain positive differences:
    • Upper right: ∣Ctarget−Clow∣|C_{\text{target}} - C_{\text{low}}| represents the proportional parts of the higher concentration.
    • Lower right: ∣Chigh−Ctarget∣|C_{\text{high}} - C_{\text{target}}| represents the proportional parts of the lower concentration.
Chigh∣Ctarget−Clow∣(Parts of Chigh)CtargetClow∣Chigh−Ctarget∣(Parts of Clow)\begin{array}{ccc} C_{\text{high}} & & |C_{\text{target}} - C_{\text{low}}| \quad (\text{Parts of } C_{\text{high}}) \\ & C_{\text{target}} & \\ C_{\text{low}} & & |C_{\text{high}} - C_{\text{target}}| \quad (\text{Parts of } C_{\text{low}}) \end{array}

Thus, the mixing ratio is:

Quantity of ChighQuantity of Clow=∣Ctarget−Clow∣∣Chigh−Ctarget∣\frac{\text{Quantity of } C_{\text{high}}}{\text{Quantity of } C_{\text{low}}} = \frac{|C_{\text{target}} - C_{\text{low}}|}{|C_{\text{high}} - C_{\text{target}}|}

Step-by-Step Alligation Demonstration

A lab combines solutions with 60% and 20% glycerol by mass to make a 35% solution. What is the required ratio of the weaker solution to the stronger one?

  1. Higher concentration: 60%60\%.
  2. Lower concentration: 20%20\%.
  3. Target concentration: 35%35\%.
  4. Calculate parts:
    • Parts of 60% solution: ∣35−20∣=15 parts|35 - 20| = 15 \text{ parts}.
    • Parts of 20% solution: ∣60−35∣=25 parts|60 - 35| = 25 \text{ parts}.
  5. Establish ratio (20% solution to 60% solution): 25:1525 : 15.
  6. Simplify by dividing by 5: 5:35 : 3.

Mixing 5 kg of the 20% solution with 3 kg of the 60% solution gives (5(0.20)+3(0.60))/8=0.35(5(0.20)+3(0.60))/8=0.35, so the ratio checks. A target equal to either endpoint uses only that component when the strengths differ. An outside target is unattainable using only these two components.


Blended Commodity and Unit Cost Pricing

To allocate the total purchase cost per unit of a mixed inventory, weight each price by its corresponding quantity, with the same units and no added costs.

Blended Unit Price=Total Cost of All ComponentsTotal Combined Quantity=Q1P1+Q2P2Q1+Q2\text{Blended Unit Price} = \frac{\text{Total Cost of All Components}}{\text{Total Combined Quantity}} = \frac{Q_1 P_1 + Q_2 P_2}{Q_1 + Q_2}

Worked Supply Depot Inventory Example

A quartermaster mixes 30 kg of Grade A ration coffee beans priced at $14/kg with 20 kg of Grade B beans priced at $9/kg. What is the blended price per kilogram of the ration mix?

  1. Calculate total expenditure for Grade A: 30 kg×$14/kg=$42030\text{ kg} \times \text{\textdollar}14/\text{kg} = \text{\textdollar}420.
  2. Calculate total expenditure for Grade B: 20 kg×$9/kg=$18020\text{ kg} \times \text{\textdollar}9/\text{kg} = \text{\textdollar}180.
  3. Calculate aggregate expenditure: $420 ++ $180 == $600.
  4. Calculate aggregate mass: 30 kg+20 kg=50 kg30 \text{ kg} + 20 \text{ kg} = 50 \text{ kg}.
  5. Calculate blended unit cost: Price per kg=$60050 kg=$12.00 per kg\text{Price per kg} = \frac{\text{\textdollar}600}{50\text{ kg}} = \text{\textdollar}12.00\text{ per kg}

Mixture Problem Framework Summary

Problem ArchetypeKnown VariablesTarget VariableDirect Technique
Direct BlendingQ1,C1,Q2,C2Q_1, C_1, Q_2, C_2Final concentration CfinalC_{\text{final}}Cfinal=Q1C1+Q2C2Q1+Q2C_{\text{final}} = \frac{Q_1 C_1 + Q_2 C_2}{Q_1 + Q_2}
Water DilutionQ1Q_1 is initial mass and 0<Cfinal≤C10<C_{\text{final}}\le C_1Mass of water added (QwQ_w)Qw=Q1(C1−Cfinal)CfinalQ_w = \frac{Q_1(C_1 - C_{\text{final}})}{C_{\text{final}}}
Target Blend RatioCl<Ct<ChC_l<C_t<C_hRatio of component quantitiesParts highParts low=Ct−ClCh−Ct\frac{\text{Parts high}}{\text{Parts low}}=\frac{C_t-C_l}{C_h-C_t}
Unit Price BlendQuantities and unit costsCost per unit of mixtureWeighted Average: ∑(Q×P)∑Q\frac{\sum(Q \times P)}{\sum Q}

Check a Weighted Average

A blend of two distinct concentrations or unit prices lies between those values if both quantities are positive. Equal quantities give their midpoint. Otherwise the value is closer to the component with the greater quantity. For the coffee example, the greater mass of the more expensive coffee puts the result above $11.50 and below $14.00.

You can use whole-number percentages in a weighted-average calculation if you carry that convention through to the end. A result of 35 on that scale means 35%. Use fractions of one when multiplying by a mass to obtain the solute mass.

Test Your Knowledge

A lab has 30 kg of solution containing 60% glycerol by mass. How many kilograms of pure water must be added to reach 40% glycerol by mass? Assume no mass is lost.

A

5 kg

B

10 kg

C

15 kg

D

45 kg

Test Your Knowledge

Batch A is 10% glycerol by mass and batch B is 40%. If no material is lost, what mass ratio of A to B yields a 22% solution?

A

2 : 3

B

1 : 1

C

1 : 2

D

3 : 2

Test Your Knowledge

A kitchen combines 18 kg of oats priced at $5 per kg with 12 kg of oats priced at $8 per kg. What is the purchase cost per kilogram of the resulting blend, before any additional costs?

A

$6.20 per kg

B

$6.50 per kg

C

$6.80 per kg

D

$6.00 per kg

Sections you finish are checked off in the contents.