10.2 Number Series, Mathematical Progressions & Pattern Rules
Key Takeaways
Test a proposed sequence rule against all given terms. A finite list alone can fit many rules.
Arithmetic sequences add a constant difference. Geometric sequences multiply by a constant factor, which may be negative.
For a quadratic rule in consecutive term positions, the second differences are constant and nonzero.
Alternating steps can follow two operations or two interleaved sequences. Check both positions or both operations.
For a recursive rule, use the specified starting values and apply the rule in the stated order.
Number Series, Mathematical Progressions & Pattern Rules
Find a Rule and Check It
A short list can fit more than one rule. For example, can start a sequence that adds 2 every time and continues with 8, or a cycle of that restarts at 2. If the problem gives a rule or a family of rules, use that constraint. Otherwise, look for a simple rule that fits every given term and compare it with the choices.
Primary Progression Types and Their Signatures
Look at how the terms change before picking a rule to test.
1. Arithmetic Progressions (Constant Common Difference)
In an arithmetic progression, each successive term is generated by adding or subtracting a constant common difference ():
- Signature: Linear change, including a constant sequence when the difference is zero. The difference between adjacent terms is constant.
- Example:
- Here, . The next term is .
- Decaying Example:
- Here, . The next term is .
2. Geometric Progressions (Constant Common Ratio)
In a geometric progression, each successive term is generated by multiplying by a fixed factor . If , the explicit formula is:
- Signature: For nonzero terms, divide each term by the preceding term to check . If and the first term is nonzero, signs alternate. If a rule multiplies by zero, all terms after the first are zero.
- Example:
- Common ratio . Next term: .
- Fractional Ratio Example:
- Common ratio (or ). Next term: .
3. Accelerating Differences (Second-Order Polynomial Sequences)
A quadratic formula with gives a constant second difference . Constant nonzero second differences in a short list are evidence to test this model. The first-order differences () increase or decrease by a constant second-order difference ():
- Example:
- Compute first differences (): , , , .
- The sequence is (an arithmetic progression with common difference ).
- Under that rule, the next first difference is .
- Therefore, the next term is .
- (Note: This sequence also matches the polynomial rule for ).
4. Alternating and Interleaved Sequences
An interleaved sequence merges two independent, alternating sequences into odd and even positions. If numbers alternate, try separating positions or testing whether the operations alternate between adjacent terms.
- Structure:
- Odd positions (): Follow Rule A.
- Even positions (): Follow Rule B.
- Example:
- Split into odd and even sub-sequences:
- Odds: (Arithmetic sequence ).
- Evens: (Arithmetic sequence ).
- The next term occupies an even position ( term), so apply Rule B: .
- Split into odd and even sub-sequences:
5. Fibonacci and Cumulative Sum Sequences
In a Fibonacci-style sequence, each term is generated by adding the previous two terms, starting from two given values:
- Signature: Beginning with positive values, each new term adds the preceding two. Check those sums directly.
- Canonical Example:
- , , , , etc.
- Shifted / Non-Standard Example:
- , , , .
- Next term: .
6. Position-Dependent Powers and Exponentials
These formulas use the position . In or , the position is the base. In , the position is the exponent:
- Perfect Squares (): .
- Squares Shifted ():
- Squares Shifted ():
- Perfect Cubes ():
- Powers of Two ():
7. Multi-Operation and Hybrid Rules
Some sequences apply two mathematical operations successively or increment the modifier at each step:
- Constant Multiplier with Incremental Addition: e.g.,
- Alternating Operations: e.g.,
- Example:
- , , , , . Next term: .
Test the Pattern
- Look for a constant difference or factor. Write consecutive differences or ratios if terms can be divided. In a geometric sequence with a negative factor, signs can alternate.
- Check how differences change. A constant nonzero second difference fits a quadratic rule. Check whether it holds across all the given terms.
- Try the given structure. Split odd and even positions if each could follow its own progression. An alternating pair of operations also fits some lists, even when the values keep increasing.
- Check each step before extending the list. For rules involving the index or earlier terms, keep the same index convention and starting values.
Sequence Rules in Practice
| Pattern Family | Structural Rule | Canonical Example Sequence | Check on the Rule | Next Term |
|---|---|---|---|---|
| Arithmetic (Add) | ||||
| Arithmetic (Subtract) | ||||
| Geometric | ||||
| Accelerating Differences | Differences increase by a constant | () | ||
| Decelerating Differences | Differences decrease by a constant | () | ||
| Interleaved Dual Series | Odd , Even | Odds: ; Evens: | ||
| Cumulative Sum (Fibonacci) | Sum of previous two terms | |||
| Squares Shifted | ||||
| Cubes | ||||
| Hybrid Multi-Operation |
Verify the Next Term
- Count positions before applying an odd- or even-position rule.
- Check whether the rule uses the previous term, the previous two terms, or the position directly.
- Apply the rule to the known terms and compare the resulting next term with the choices. If different permitted rules lead to different choices, the conditions are insufficient.
The differences between consecutive terms grow by a constant amount. What is the next term in 4, 9, 17, 28, 42, …?
54
56
57
59
The odd positions and the even positions each form their own arithmetic sequence. What comes next in 4, 18, 9, 15, 14, 12, 19, …?
8
9
10
24
Each term after the first is twice its predecessor plus an integer. That added integer increases by 1 at each step. What comes next in 3, 7, 16, 35, 74, …?
148
152
153
156
Sections you finish are checked off in the contents.