8.3 Inequalities, Absolute Values & Number Line Intervals

Key Takeaways

  • Multiplying or dividing both sides of an inequality by a negative constant reverses the inequality sign.

  • AND takes the intersection of the allowed sets. OR takes the union. Graph each condition if the overlap is unclear.

  • For ∣u∣=c|u|=c with c>0c>0, solve u=cu=c or u=−cu=-c. For c=0c=0, solve u=0u=0. A negative right-hand side gives no solution.

  • For k>0k>0, ∣u∣<k|u|<k means −k<u<k-k<u<k, and ∣u∣>k|u|>k means u<−ku<-k or u>ku>k. Include the endpoints for non-strict inequalities.

  • For a symmetric tolerance δ\delta around a target TT, the condition ∣p−T∣≤δ|p-T|\le\delta includes both endpoints.

Last updated: November 2026

Inequalities, Absolute Values & Number Line Intervals

Model a Limit

An equality specifies an exact value. An inequality specifies a condition such as a spending ceiling, a minimum stock level or an allowed pressure range. First identify the quantity being limited, then decide whether the boundary itself meets the condition.

Linear Inequalities: Strict vs. Non-Strict Relationships

The table describes the graph after you isolate the variable on the left and write its numerical boundary on the right.

SymbolMathematical DefinitionGraphical Number Line MarkerVerbal Clues in Word Problems
<<Strictly less thanOpen circle (∘\circ), ray pointing left"Fewer than", "under", "strictly below"
>>Strictly greater thanOpen circle (∘\circ), ray pointing right"More than", "exceeds", "strictly above"
≤\leLess than or equal toClosed solid dot (∙\bullet), ray pointing left"At most", "maximum of", "does not exceed", "ceiling"
≥\geGreater than or equal toClosed solid dot (∙\bullet), ray pointing right"At least", "minimum of", "no less than", "floor"

Boundary Translation Nuances

Translate the boundary words before solving:

  • "At least 40 personnel": Translates to p≥40p \ge 40 (40 is permitted; non-strict).
  • "No more than $1,200": Translates to c≤1200c \le 1200 ($1,200 is permitted; non-strict).
  • "Exceeds 85 kilometres": Translates to d>85d > 85 (85 is excluded; strict).

The Fundamental Rule of Inequalities: Negative Inversion

Adding or subtracting the same real number on both sides preserves the inequality. Multiplying or dividing both sides by a positive number preserves it too. Use a nonzero multiplier so you can reverse the operation.

However, the Fundamental Rule of Inequalities dictates: Whenever both sides of an inequality are multiplied or divided by a negative number, the inequality sign MUST REVERSE direction.\text{Whenever both sides of an inequality are multiplied or divided by a negative number, the inequality sign MUST REVERSE direction.}

If a<b and c<0,then ac>bcIf −3x≤18,dividing by −3  ⟹  x≥−6\begin{aligned} \text{If } a < b \text{ and } c < 0, &\quad \text{then } ac > bc \\ \text{If } -3x \le 18, &\quad \text{dividing by } -3 \implies x \ge -6 \end{aligned}

Why Does the Sign Reverse?

Consider a simple numerical truth: 3<73 < 7. If we locate these numbers on a number line, 3 is to the left of 7. If we multiply both values by −1-1, we obtain −3-3 and −7-7. On the number line, −3-3 lies to the right of −7-7, meaning −3>−7-3 > -7. Multiplying by a negative reflects values across zero, inverting their relative spatial order.

Step-by-Step Negative Inversion Example

Solve for xx: 18−4x>3418 - 4x > 34

  1. Subtract 18 from both sides: −4x>34−18-4x > 34 - 18 −4x>16-4x > 16
  2. Divide both sides by the negative coefficient −4-4 and reverse the inequality symbol from >> to <<: x<16−4  ⟹  x<−4x < \frac{16}{-4} \implies x < -4
  3. Verification with a test value: Choose an integer strictly less than −4-4, such as x=−5x = -5. Substitute into original inequality: 18−4(−5)=18+20=3818 - 4(-5) = 18 + 20 = 38. This checks a point inside the solution set. At x=−4x=-4, the left side is exactly 34, so the strict inequality excludes the boundary. At x=0x=0, the left side is 18. The algebra gives the full solution set.

Compound Inequalities and Intervals

A compound inequality consists of two distinct inequalities joined by either the word AND (conjunction) or the word OR (disjunction).

1. Conjunctions ("AND" Statements / Double Inequalities)

A conjunction requires that both conditions must be satisfied simultaneously. Take the intersection of the two solution sets. In the example below the intersection is bounded. Two rays pointing in the same direction can instead intersect in an unbounded ray.

Double inequalities are standard representations of conjunctions: −6≤3x+3<15-6 \le 3x + 3 < 15 To solve a double inequality, perform the necessary inverse operations on all three segments simultaneously:

  1. Subtract 3 from all three segments: −6−3≤3x<15−3  ⟹  −9≤3x<12-6 - 3 \le 3x < 15 - 3 \implies -9 \le 3x < 12
  2. Divide all three segments by 3: −3≤x<4-3 \le x < 4 The solution set is [−3,4)[-3,4). Use a solid dot at −3-3 and an open circle at 44.

2. Disjunctions ("OR" Statements)

A disjunction requires that at least one of the conditions must be satisfied. Take the union of the two solution sets, including any overlap only once. The following example has two disjoint rays: 2x−1≤−7or3x+2>142x - 1 \le -7 \quad \text{or} \quad 3x + 2 > 14 Solving each ray independently:

  • Ray 1: 2x≤−6  ⟹  x≤−32x \le -6 \implies x \le -3
  • Ray 2: 3x>12  ⟹  x>43x > 12 \implies x > 4 The solution set consists of all values where x≤−3x \le -3 or x>4x > 4.

Absolute Value Equations: Two-Case Branching

The absolute value of a real number xx, denoted ∣x∣|x|, represents its non-negative distance from zero on the number line. Because distance is inherently non-negative, ∣x∣≥0|x| \ge 0 for all real numbers.

The Two-Case Decomposition Rule

For c>0c>0, the expression inside the absolute value must equal either cc or −c-c. Solve both equations and combine their solutions: ∣ax+b∣=c  ⟺  ax+b=corax+b=−c|ax + b| = c \iff ax + b = c \quad \text{or} \quad ax + b = -c

For c=0c=0, solve ax+b=0ax+b=0 once. If an equation presents an absolute value equal to a negative number (e.g., ∣2x+5∣=−8|2x + 5| = -8), there are no real solutions, because absolute value can never evaluate to a negative quantity.

Worked Absolute Value Example

Solve for xx: 3∣2x−5∣−4=173|2x - 5| - 4 = 17

  1. Isolate the Absolute Value Term First: 3∣2x−5∣=21  ⟹  ∣2x−5∣=73|2x - 5| = 21 \implies |2x - 5| = 7
  2. Decompose into Two Independent Linear Cases:
    • Case 1 (Positive): 2x−5=7  ⟹  2x=12  ⟹  x=62x - 5 = 7 \implies 2x = 12 \implies x = 6
    • Case 2 (Negative): 2x−5=−7  ⟹  2x=−2  ⟹  x=−12x - 5 = -7 \implies 2x = -2 \implies x = -1
  3. Verify Both Solutions:
    • For x=6x = 6: 3∣2(6)−5∣−4=3∣7∣−4=21−4=173|2(6) - 5| - 4 = 3|7| - 4 = 21 - 4 = 17.
    • For x=−1x = -1: 3∣2(−1)−5∣−4=3∣−7∣−4=21−4=173|2(-1) - 5| - 4 = 3|-7| - 4 = 21 - 4 = 17. Both x=6x = 6 and x=−1x = -1 are valid real solutions.

Absolute Value Inequalities: Inside vs. Outside

Absolute value inequalities model tolerance bands, acceptable deviation limits, and boundary thresholds. Their solutions depend entirely on whether the inequality symbol is "less than" or "greater than."

1. Less Than: The "AND" Bounded Interval (∣u∣<k|u| < k)

For k>0k>0, ∣u∣<k|u|<k places uu strictly between the endpoints. For ∣u∣≤k|u|\le k, include the endpoints: −k≤u≤k-k\le u\le k. Memory Rule: "Less thAND"  ⟹  −k<u<k\text{Memory Rule: "Less th\textbf{AND}"} \implies -k < u < k

  • Example: ∣3x−4∣≤11|3x - 4| \le 11 −11≤3x−4≤11-11 \le 3x - 4 \le 11 Add 4 to all parts: −7≤3x≤15-7 \le 3x \le 15 Divide by 3: −73≤x≤5-\frac{7}{3} \le x \le 5

2. Greater Than: The "OR" Disjoint Rays (∣u∣>k|u| > k)

For k>0k>0, ∣u∣>k|u|>k places uu strictly outside the endpoints. For ∣u∣≥k|u|\ge k, include the endpoints: u≤−ku\le-k or u≥ku\ge k. Memory Rule: "GreatOR"  ⟹  u<−koru>k\text{Memory Rule: "Great\textbf{OR}"} \implies u < -k \quad \text{or} \quad u > k

  • Example: ∣2x+1∣>7|2x + 1| > 7 Decompose into two separate outer rays:
    • Ray 1: 2x+1>7  ⟹  2x>6  ⟹  x>32x + 1 > 7 \implies 2x > 6 \implies x > 3
    • Ray 2: 2x+1<−7  ⟹  2x<−8  ⟹  x<−42x + 1 < -7 \implies 2x < -8 \implies x < -4 Combined solution set: x<−4x < -4 or x>3x > 3.

Tolerances

If k≤0k\le0, compare the nonnegative distance with kk directly. For example, ∣u∣<0|u|<0 has no solutions, ∣u∣≤0|u|\le0 requires u=0u=0, and ∣u∣≥0|u|\ge0 holds for every real uu.

Use this model when a tolerance allows the same deviation δ≥0\delta\ge0 in both directions from a target TT and includes the boundary: ∣Actual Value−Nominal Target∣≤Allowable Tolerance|\text{Actual Value} - \text{Nominal Target}| \le \text{Allowable Tolerance}

Worked Tolerance Scenario

Scenario: A practice inspection sets a target pressure of 2,400 kilopascals (kPa) and accepts readings up to 85 kPa above or below that target. Model the allowed readings, with pp measured in kPa.

  1. Model the Condition: ∣p−2400∣≤85|p - 2400| \le 85
  2. Expand the Bounded Interval: −85≤p−2400≤85-85 \le p - 2400 \le 85
  3. Add 2,400 Across All Segments: 2400−85≤p≤2400+852400 - 85 \le p \le 2400 + 85 2315≤p≤24852315 \le p \le 2485 The stated tolerance accepts readings from 2,315 kPa through 2,485 kPa, including both endpoints.

Checks to Use During Practice

  • Tip 1: Highlight Negative Multipliers Immediately. Reverse the inequality only when both sides are multiplied or divided by a negative number.
  • Tip 2: Use the "Less thAND" / "GreatOR" Mnemonics. For k>0k>0, check whether the condition asks for points inside both endpoints (AND) or outside one of them (OR).
  • Tip 3: Check the Boundary and Both Sides. Check the endpoint and a value on either side against the original inequality. These tests can catch a sign error in the algebra.
Test Your Knowledge

Solve the linear inequality for xx: 14−5x≤3914 - 5x \le 39.

A

x≤−5x \le -5

B

x≥−5x \ge -5

C

x≥5x \ge 5

D

x≤5x \le 5

Test Your Knowledge

What are all the real solutions to the equation ∣4x−6∣+5=23|4x - 6| + 5 = 23?

A

x=6x = 6 only

B

x=7x = 7 and x=−4x = -4

C

x=3x = 3 and x=−6x = -6

D

x=6x = 6 and x=−3x = -3

Test Your Knowledge

In a practice inspection, a part has a target diameter of 105.00 mm and may differ from that target by at most 0.15 mm. Let dd be its diameter measured in millimetres. Which inequality and interval fit the requirement?

A

∣d−105.00∣≤0.15|d - 105.00| \le 0.15, representing the interval 104.85≤d≤105.15104.85 \le d \le 105.15

B

∣d−105.00∣≥0.15|d - 105.00| \ge 0.15, representing diameters d≤104.85d \le 104.85 or d≥105.15d \ge 105.15

C

∣d−0.15∣≤105.00|d - 0.15| \le 105.00, representing the interval −104.85≤d≤105.15-104.85 \le d \le 105.15

D

∣d+105.00∣≤0.15|d + 105.00| \le 0.15, representing the interval −105.15≤d≤−104.85-105.15 \le d \le -104.85

Sections you finish are checked off in the contents.