19.2 Mechanical Thrombectomy & Percutaneous Atherectomy
Key Takeaways
A thrombectomy system physically removes thrombus. The revascularization plan also addresses the underlying lesion when indicated.
AngioJet jets generate a pressure gradient for clot evacuation. Select an indicated catheter set and follow its runtime, rhythm monitoring and hemolysis precautions.
Compatible Lightning tubing adjusts suction. FlowTriever uses syringe aspiration in specified configurations, and ClotTriever mechanically cores and collects peripheral venous thrombus.
Directional cutting, a central rotating burr, an eccentric orbiting crown and laser photoablation modify plaque in different ways.
Match flush and embolic protection to the specific device and target anatomy. Check distal perfusion and survey for vessel injury after treatment.
19.2 Mechanical Thrombectomy & Percutaneous Atherectomy
Clinical Core: Mechanical thrombectomy removes thrombus with aspiration, fluid jets or a retrieval element. Atherectomy modifies or removes plaque. Identify which material is limiting flow, the target vessel and the exact device before preparing the console and disposable set. Mixed disease can require both clot treatment and treatment of the underlying stenosis.
Mechanical Thrombectomy
Physical extraction can restore flow during the procedure and may reduce or avoid the use of thrombolytic medication in selected patients. It still carries risks from access, blood loss, dissection, perforation and embolization. The team considers perfusion and time to reperfusion in acute limb ischemia. In iliofemoral DVT and acute PE, patient selection and the role of an intervention follow the separate venous and pulmonary pathways in this guide.
| Approach | What the device does | What to verify before use |
|---|---|---|
| Rheolytic | AngioJet directs saline jets within the catheter tip to create a local pressure gradient. Thrombus is drawn toward the inlets, fragmented and evacuated through waste tubing. | Console and disposable set, labeled vessel and diameter, saline supply, priming and waste circuit. |
| Pump aspiration | The Penumbra Indigo system uses an external vacuum source. Compatible Lightning tubing senses changes in flow or pressure and adjusts suction as clot and free-flowing blood pass through the system. | Catheter, tubing and pump compatibility. Monitor canister volume and cumulative blood loss during aspiration. |
| Large-bore syringe aspiration | FlowTriever uses aspiration through a large-bore catheter, with certain configurations supporting an additional retrieval element. U.S. labeling specifies the applications for each catheter and system configuration, including PE for applicable models. | Sheath and device compatibility, preparation of the specified aspiration assembly, and an agreed plan for blood loss and access surveillance. |
| Mechanical coring and collection | ClotTriever uses an expandable coring element and collection bag to draw thrombus from peripheral veins including in selected DVT cases. | Size match, deployment and reconstraining markers, and a plan for access hemostasis and monitoring. |
Rheolytic setup and surveillance
U.S. AngioJet indications depend on the set. For example, Solent Omni/Proxi sets include several peripheral artery and vein applications and certain arteriovenous access conduits of at least 3 mm. The AVX set is labeled for arteriovenous access conduits of at least 3 mm. The manufacturer's U.S. warnings state that these sets have not been evaluated for PE and report serious adverse events, including deaths, with use in PE. A team treating acute PE checks the labeling of the intended pulmonary device.
The Power Pulse capability of compatible sets selectively infuses a clinician-specified fluid in the peripheral vasculature. If a thrombolytic is used, its bleeding risks and the applicable monitoring plan still apply. The console and catheter instructions define the operative modes and recommended operating limits. The instructions for Solent Omni/Proxi also warn against contrast injection by power injector or forceful hand injection through the set.
Hemolysis may produce hemoglobinuria and contribute to renal injury. Check the cumulative operating time against the set's instructions. The treating team considers renal function, clot burden, body size and patient-specific hydration. ECG monitoring helps detect arrhythmias during activation. Report sudden rate or rhythm changes immediately. The clinician determines whether stopping the device, resuscitation or temporary pacing is needed. New hypoxemia, pain or loss of distal flow can indicate embolization or vessel injury and warrants prompt reassessment.
Worked setup check. The team plans labeled AngioJet AVX use in a 4-mm thrombosed dialysis access conduit. The size meets the 3-mm minimum. When the rhythm slows during activation, report the change and identify whether perfusion is affected. The rhythm alert and the cumulative activation time are separate checks. Reconnect the monitored finding to the adult bradycardia or arrest pathway if clinically indicated.
Atherectomy
The operator chooses a technique after reviewing lesion morphology, calcification, vessel size, access and runoff. Atherectomy can be combined with balloon treatment or stenting when indicated. For common femoral disease, the 2024 multisociety PAD guideline supports considering endarterectomy in the relevant patients. An endovascular approach can be considered in selected anatomy or higher surgical risk, with attention to the profunda femoris pathway.
| Device family | Mechanism | Preparation or hazard |
|---|---|---|
| Directional | A cutting window is oriented toward plaque. A device such as HawkOne shaves tissue into a collection chamber. | Confirm orientation, working length and the collection chamber. HawkOne labeling pairs it with SpiderFX for severely calcified lesions. |
| Rotational | A diamond-coated burr rotates around its drive shaft. Rigid plaque is preferentially abraded as compliant tissue may deflect from the burr. | Peripheral ROTAPRO settings and accessories depend on the specified burr and system. Dissection, perforation and distal slow flow remain possible. |
| Orbital | An eccentrically mounted diamond-coated crown orbits as it spins. The orbit diameter depends on factors including speed and crown characteristics. | Verify the dedicated wire and model instructions. Assess distal flow and vessel integrity after treatment. |
| Excimer laser | Fiber optics deliver pulsed ultraviolet energy for photoablation. Some peripheral applications include femoropopliteal in-stent restenosis, depending on the system configuration and indication. | Prepare the specified flush to clear blood and contrast around the treatment field during activation. Verify the laser, catheter, eye protection and flush requirements in the applicable instructions. |
Managing debris
Distal debris can obstruct the runoff and reduce tissue perfusion. A distal filter needs an adequate landing segment and a filter sized for that segment. Its use and compatibility depend on the anatomy, device label and procedure. The lower-extremity indication for SpiderFX with a named plaque excision catheter is distinct from use of embolic protection in carotid or saphenous vein graft intervention. After therapy, evaluate distal run-off, residual clot or stenosis, and vessel injury. Communicate changes in flow before finalizing the equipment and access plan.
Worked evidence comparison. In EXCITE ISR, investigators compared excimer laser plus balloon angioplasty with angioplasty alone in selected femoropopliteal bare nitinol stent restenosis. At six months the groups had 73.5% versus 51.8% freedom from target-lesion revascularization, a 21.7-percentage-point absolute difference. The endpoint concerned repeat treatment of the original lesion in that population. A different vascular bed, stent or lesion belongs to a different evidence question.
A team plans catheter thrombectomy for acute PE. The listed disposable is an AngioJet Solent Omni set. What is the most appropriate setup finding to communicate?
The set is labeled for pulmonary arteries when their diameter is at least 3 mm.
Power Pulse capability extends the vascular indications to PE.
Routine atropine makes the pulmonary application consistent with the manufacturer’s warnings.
U.S. labeling describes peripheral applications and warns of serious adverse events, including deaths, reported with PE use.
Which description distinguishes the mechanism of the diamond-coated burr of peripheral rotational atherectomy?
An off-center crown orbits around the guidewire.
A burr rotates around its shaft and preferentially abrades rigid plaque. Vessel injury is still possible.
Pulsed ultraviolet light modifies plaque through fiber optics.
A directional window cuts tissue into a collection chamber.
What distinguishes the compatible Lightning aspiration tubing on a Penumbra Indigo setup?
Sensors distinguish flow conditions and adjust aspiration. Blood loss still requires monitoring.
A large syringe supplies the only vacuum through the catheter.
A coring element and bag collect thrombus with no aspiration circuit.
A directional blade shaves plaque into a nosecone.
Sections you finish are checked off in the contents.