6.4 Functions, Systems & Models
Key Takeaways
A function assigns one output to each allowed input. Evaluate f(x) only on its domain when interpreting a model.
A graph shows the points that satisfy the equation. Use labeled axes, appropriate scales and the allowed inputs.
A system solution must satisfy every equation or inequality and all practical constraints.
With equal input steps, linear models give equal output differences and exponential models give equal factors.
Identify the starting value, the units of a linear rate, or the time interval for an exponential factor.
6.4 Functions, Systems & Models
Quick Answer: A function assigns one output to each allowed input. Its graph consists of points . A system asks for pairs that satisfy every equation or inequality in the system. Over equal input steps, a linear model changes by a fixed amount and an exponential model changes by a fixed factor.
Read and Evaluate a Function
The domain is the set of allowed inputs. The range is the set of outputs the function actually produces. A table with entries , and can be a function because each input occurs with only one output. Repeating an output is fine. Adding makes the table fail as a function of the first coordinate. A vertical line drawn at would meet the table's plotted points twice. A relation is a function of when no vertical line meets its graph more than once.
Suppose a small print shop's stated price for one run is dollars for copies, where the shop accepts 1 to 200 whole copies. The domain is the integers from 1 through 200. Evaluate . This means the shop charges 10 dollars for 24 copies, and belongs to the model's graph. The horizontal axis is copies and the vertical axis is dollars. The rate is 0.25 dollars per copy. The number 4 is the setup charge in the formula. The expression can be evaluated algebraically at zero, but a zero-copy order is outside the stated domain. Plot separate points, because fractional numbers of copies are outside the domain.
Graph and Interpret Formulas
The graph of an equation in two variables contains exactly the points that satisfy it. For instance, contains because . It does not contain . Use a table with and to sketch the curve. For this quadratic on all real inputs, mark the minimum , vertical intercept and horizontal intercepts and . The curve falls as goes toward zero from the left and rises after zero on the right. It is nonlinear because the change in differs across equal steps in . In contrast, even a zero slope in gives a straight line. Match the scale on each axis to the units or labels in the question.
For a more involved practice graph, enter in a graphing tool. A window of and shows its turn and both crossings of the horizontal axis. Read the approximate crossings at and . To check them, set and solve , giving . The fourth power is nonnegative, so is the minimum. Resize the window if a feature is off screen or hard to distinguish. The window controls the view. The domain of this polynomial is all real inputs.
To sketch from words, locate intervals where a quantity rises, stays steady or falls. A tank with 10 gallons at minute 0 gains 3 gallons each minute for 4 minutes, stays at that level for 2 minutes, then loses 2 gallons each minute for 3 minutes. Plot , , and with minutes along the horizontal axis and gallons along the vertical axis. Connect consecutive points with straight segments because the stated rates hold throughout each interval. The middle segment has zero slope, and the last segment falls less steeply than the first rises when the plot uses the same scales throughout.
Solve Systems and Check Constraints
A solution to two equations in the same variables is a point on both graphs. Distinct nonparallel lines meet once, distinct parallel lines never meet, and coincident lines share all their points before any domain restrictions are applied. A visible intersection may be approximate. Substitution or elimination can give the exact coordinates.
A volunteer team will fill 18 cartons. Each small carton holds 4 books, and each large carton holds 7 books. All 99 books must go into full cartons. Write for small cartons and for large cartons. The equations are and . Substitute into the second equation to get . Thus and , so . Check both totals: cartons and books. To solve by elimination, multiply the first equation by 4 and subtract it from the second. The terms cancel and give the same . On axes labeled small and large cartons, the solution is , a viable pair because both counts are nonnegative integers.
If the team can instead fill at most 18 cartons and pack at least 99 books, the constraints are , , and must be nonnegative integers. The pair works: it uses 18 cartons and holds 102 books. The pair uses 18 cartons and holds only 96 books, so it fails. An algebraic pair can satisfy both inequalities and still be impossible in context. For example, gives 18 cartons and 100.5 by the expressions, but cartons are indivisible here.
For a graphical check on axes labeled and , first draw the boundaries and . Use solid lines because equality is allowed. The feasible area is at or below the first line and at or above the second, restricted to the first quadrant and its axes. Within that area, count only the nonnegative integer grid points. For strict inequalities such as , the boundary is dashed and its points are excluded.
Distinguish Linear and Exponential Growth or Decay
Compare values over equal input intervals. Linear models add the same amount each step. Exponential models multiply by the same factor each step. A positive starting quantity growing by 20% per week has factor , while a positive quantity losing 20% per week has factor . The percent applies to the quantity at the start of that week's interval.
Two practice goals start at 100 records. One adds 20 records to its target each week. The other raises its target by 20% of the previous week's target. For whole weeks , use and .
| Week | Linear target | Exponential target |
|---|---|---|
| 0 | 100 | 100 |
| 1 | 120 | 120 |
| 2 | 140 | 144 |
| 3 | 160 | 172.8 |
The models agree at week 1 but differ later because the exponential increase is 20, then 24, then 28.8. In this example the targets are mathematical benchmarks before rounding to whole records. The slope 20 in the linear model is measured in records per week. The factor 1.20 is a multiplier for each week, and 100 is the starting target in both models. Rewriting shows that the exponential target multiplies by 1.44 every two weeks, a 44% increase over that interval.
For a decay model defined for real , plot , , and . The graph starts at 200 and falls toward zero without reaching it. It has no horizontal intercept. The unequal drops 40, 32 and 25.6 show why a straight line would misrepresent the stated decay. To decide between models, check the pattern across more than one interval and consider whether the graph is continuous or only defined at separate inputs.
A shop models a print order with P(n) = 3 + 0.4n dollars for whole copy counts from 1 to 50. Which statement correctly describes a point on the model's graph?
(0, 3) is a feasible order for zero copies.
(22, 10) represents an order of 22 copies costing 10 dollars.
(10, 7) represents an order of 10 copies costing 7 dollars.
(7, 10) represents an order of 10 copies costing 7 dollars.
A volunteer can pack at most 12 crates. Small crates hold 5 jars each and large crates hold 8 each. Which nonnegative whole-number pair (small crates, large crates) uses at most 12 crates and holds at least 84 jars?
(4, 8)
(5, 7)
(3, 10)
(6, 6)
After each day a model retains 90% of the previous day’s tracked quantity. The initial quantity is 500 units. Which equation expresses the amount after d days, and what percentage of the initial amount remains after two days?
A(d) = 500 − 50d, with 80% remaining.
A(d) = 500(0.10)^d, with 1% remaining.
A(d) = 500(1.10)^d, with 121% remaining.
A(d) = 500(0.90)^d, with 81% remaining.
A graph shows a path's elevation. The horizontal axis measures distance east in miles. The elevation begins at 100 feet, drops steadily to 60 feet by mile 2, then stays there through mile 5. Which sketch description matches?
A line rising from (0, 100) to (2, 140), followed by a horizontal segment to (5, 140).
A falling line from (0, 100) to (2, 60), followed by a horizontal segment to (5, 60).
A horizontal segment from (0, 100) to (2, 100), followed by a falling line to (5, 60).
A falling straight line from (0, 100) through (2, 60) all the way to (5, 0).
For small and large cartons, let s and l be whole nonnegative counts. A shipment uses exactly 14 cartons and holds exactly 74 items. Small cartons hold 4 items each and large cartons hold 7 each. Which point (s, l) meets both conditions?
(5, 9)
(10, 4)
(8, 6)
(6, 8)
Sections you finish are checked off in the contents.