6.3 The Coordinate Plane, Linear Functions & Slope
Key Takeaways
Read (x, y) as horizontal, then vertical. An axis point belongs to no quadrant.
For a nonvertical line, slope is rise divided by run in the axes’ units. A horizontal line has zero slope and a vertical line has undefined slope.
In y = mx + b, m is the rate and (0, b) is the y-intercept. Interpret b as a starting value when zero is an allowed input.
Distinct nonvertical lines with the same slope are parallel, as are distinct vertical lines. Nonzero finite perpendicular slopes are negative reciprocals. A vertical line and a horizontal line are also perpendicular.
Compare linear models at allowed inputs. A calculated intersection outside the common domain gives no feasible break-even point.
6.3 The Coordinate Plane, Linear Functions & Slope
Quick Answer: The Cartesian coordinate plane is structured by two perpendicular number lines: the horizontal -axis and the vertical -axis, which intersect at the origin . Points are plotted as ordered pairs , where represents horizontal displacement and represents vertical displacement. The plane is divided into four quadrants: I , II , III , and IV . For a nonvertical line, slope () is the constant rate of change, calculated as . In the slope-intercept form of a linear equation, , is the slope and is the -coordinate of the point where the line meets the -axis. Horizontal lines have an equation of with a slope of zero; vertical lines have an equation of with an undefined slope.
Anatomy of the Cartesian Coordinate Plane
The Cartesian coordinate plane provides a two-dimensional grid system that connects algebraic equations with visual geometric graphs. Every point on the plane is pinpointed by a unique ordered pair written in parentheses as :
- -coordinate (Abscissa): The directed horizontal distance from the vertical axis. Positive values move to the right; negative values move to the left.
- -coordinate (Ordinate): The directed vertical distance from the horizontal axis. Positive values move upward; negative values move downward.
- Origin : The central intersection point of the two coordinate axes.
The Four Quadrants and Sign Conventions
The intersection of the -axis and -axis divides the infinite coordinate plane into four quadrants, numbered counterclockwise using Roman numerals starting from the top-right:
| Quadrant | Location | -coordinate Sign | -coordinate Sign | Example Point |
|---|---|---|---|---|
| Quadrant I | Upper Right | Positive () | Positive () | |
| Quadrant II | Upper Left | Negative () | Positive () | |
| Quadrant III | Lower Left | Negative () | Negative () | |
| Quadrant IV | Lower Right | Positive () | Negative () |
Plotting Coordinates and Reading Units
Start at , move left or right using the first coordinate, then move down or up using the second. In a graph of how many crates are packed over time, the elapsed hours are the independent variable on the horizontal axis. The number packed is the dependent variable on the vertical axis. The point means 18 crates packed by the end of 2 hours. If the vertical marks count by 6, belongs at the third mark above zero. Count the units printed on each axis, not the spaces alone.
To draw a polygon, plot the vertices in order, connect adjacent vertices and close the last side. For a rectangle with corners , , and , the bottom edge is horizontal and has length units. The right edge is vertical and has length units. For an axis-aligned segment anywhere in the plane, take the absolute value of the difference between the coordinates that change. For example, reflecting over the vertical axis gives , so the horizontal distance across the axis is units. Reflecting the original point over the horizontal axis gives by changing the sign of the second coordinate. Changing both signs places the point in the diagonally opposite quadrant.
Points on the Coordinate Axes (Intercepts)
Points that lie directly on either axis do not belong to any quadrant:
- -intercept: Any point on the horizontal axis has a -value of zero: . It is an intercept of a graph when it belongs to both that graph and the -axis.
- -intercept: Any point on the vertical axis has an -value of zero: . It is an intercept of a graph when it belongs to both that graph and the -axis.
Distance and Midpoint Formulas
When two points and are plotted on the coordinate grid, their separation distance and midpoint are calculated using foundational geometric formulas:
-
Distance Formula: Derived directly from the Pythagorean Theorem (, where horizontal leg and vertical leg ):
-
Midpoint Formula: Computes the exact geometric center by taking the arithmetic average of the -coordinates and -coordinates:
Slope () as a Constant Rate of Change
The slope of a line quantifies its steepness and direction. In practical trade and technical applications, slope represents a rate of change (such as speed in miles per hour, unit cost in dollars per pound, or pipe grade in inches of drop per foot of run).
The Slope Formula
If two points and lie on a nonvertical line and , divide the vertical change (rise) by the horizontal change (run):
Step-by-Step Slope Calculation with Negative Signs
Example: Find the slope of the line passing through points and .
- Assign coordinates: .
- Substitute carefully into the formula, guarding negative signs:
- The slope is , meaning that for every 1 unit the line moves to the right, it drops vertically by 2 units.
The Four Types of Slope
Positive (m > 0) Negative (m < 0) Zero (m = 0) Undefined (Vertical)
/ \ ------------ |
/ \ |
/ \ |
Rises L -> R Falls L -> R Horizontal |
- Positive Slope (): Line slants upward from left to right. As increases, increases.
- Negative Slope (): Line slants downward from left to right. As increases, decreases.
- Zero Slope (): Line is perfectly horizontal. The vertical change is zero (), so . The equation of any horizontal line is (where is a constant).
- Undefined Slope: Line is perfectly vertical. The horizontal change is zero (), resulting in division by zero (), which is mathematically undefined. The equation of any vertical line is .
Parallel and Perpendicular Lines
- Parallel lines: Distinct nonvertical lines are parallel exactly when they have the same slope. If their intercepts also match, they are the same line. Distinct vertical lines and are parallel too.
- Perpendicular lines: A vertical line and a horizontal line meet at a right angle. Two lines with finite, nonzero slopes are perpendicular exactly when their slopes are negative reciprocals. For example, a line with slope is perpendicular to one with slope , since their product is .
Slope-Intercept Form of a Linear Equation
The slope-intercept form is a useful format for expressing nonvertical lines:
- (Slope): The constant rate of change per unit increase in .
- (-intercept): The value of when . The line meets the vertical axis at . In an applied model, describes a baseline when zero is in the input domain. If zero is outside that domain, the formal intercept need not be a meaningful or observed value.
Converting Standard Form () to Slope-Intercept Form
In standard form with and not both zero, isolate when . If , write the vertical line as .
Example: Convert to slope-intercept form.
- Isolate the -term by subtracting from both sides:
- Divide every single term by :
- Simplify all signs and fractions:
- Identify parameters: The slope is and the -intercept is .
Writing an Equation Given Two Points
To find the equation of the line through two distinct points, first check the -coordinates. If , the line is . Otherwise, follow these steps:
- Step 1: Calculate slope: .
- Step 2: Substitute and either known point into to solve for (or use point-slope form: ).
- Step 3: Re-write the final equation inserting the numeric values for and .
Graphing Linear Equations
These three methods graph a line from its equation.
Method 1: Slope-Intercept Method
- Plot the -intercept on the vertical axis.
- Express the slope as a fraction . Choose a positive run. From the intercept, move right by the run and then up for positive rise, down for negative rise or level for zero rise. Use the units on both axes.
- Connect the two points. For an unrestricted line, draw arrows at both ends. In a model, show only inputs allowed by the situation. For instance, a whole-number count may call for separate plotted points.
Method 2: The Intercepts (Cover-Up) Method
For with nonzero , and , the two intercepts give distinct points:
- Find -intercept: Set and solve for : . Plot .
- Find -intercept: Set and solve for : . Plot .
- Connect the two intercepts.
- If , both axes can give the same point when and are nonzero. Choose a second point using the equation. If either coefficient is zero, never divide by it. Use the horizontal or vertical line equation directly. A graph may lie along an axis or miss an axis entirely.
Method 3: Plotting from a Table
Choose allowable inputs, solve for each output and plot the ordered pairs. For , gives . Plot , and . Each point makes the equation true. A vertical equation such as can be graphed by choosing distinct -values, for example and .
Applied Linear Models in Real-World Contexts
1. Fixed Fee Plus Variable Rate Service Billing
If a stated service plan charges a fixed fee plus the same hourly rate for every hour, its cost can be modeled by
- (the -intercept)
- (the slope)
2. Straight-Line Asset Depreciation
In a model that lowers book value by the same amount each year over a specified useful life, use
- (the -intercept at )
- is the positive amount lost per year, so the slope is .
- measures elapsed years within the given useful life. The endpoint gives the stated ending book value. The model does not predict resale price.
3. Break-Even and Cost Comparison Analysis
For two plans with the same input units, set their costs equal. If the slopes differ, the calculated intersection is a break-even point only if its input is allowed by both plans. Check an allowed input on either side to see which plan costs less. If both rates are equal, different fixed fees give no intersection and the lower fee wins throughout. Identical rates and fees give equal costs throughout the common domain.
A survey line L1 passes through the coordinate points (-3, 8) and (5, -4). What is the slope of line L1, what is its equation in slope-intercept form, and what is the slope of any proposed construction boundary line L2 that must run exactly perpendicular to line L1?
Slope of L1 = -2/3; Equation: y = -2/3 x + 6; Perpendicular slope = 3/2
Slope of L1 = 3/2; Equation: y = 3/2 x + 12.5; Perpendicular slope = -2/3
Slope of L1 = -3/2; Equation: y = -3/2 x + 7/2; Perpendicular slope = -3/2
Slope of L1 = -3/2; Equation: y = -3/2 x + 7/2; Perpendicular slope = 2/3
An HVAC commercial contractor offers two service plans for industrial refrigeration maintenance. Plan A charges a flat dispatch fee of $120 plus $65 per hour of labor. Plan B charges a flat dispatch fee of $40 plus $85 per hour of labor. If x represents hours of labor and y represents total billed cost, which system of equations models the two plans, at how many labor hours do both plans cost the exact same amount, and which plan is cheaper for an extensive repair requiring 7 hours of labor?
Plan A: y = 65x + 120; Plan B: y = 85x + 40; Equal cost at 4 hours ($380.00); Plan A is cheaper for 7 hours ($575 vs. $635)
Plan A: y = 120x + 65; Plan B: y = 40x + 85; Equal cost at 4 hours ($545.00); Plan B is cheaper for 7 hours ($615 vs. $905)
Plan A: y = 65x + 120; Plan B: y = 85x + 40; Equal cost at 5 hours ($445.00); Plan B is cheaper for 7 hours ($635 vs. $575)
Plan A: y = 65x + 120; Plan B: y = 85x + 40; Equal cost at 6 hours ($510.00); Both plans cost the same at 7 hours
A general contracting company purchases a heavy-duty hydraulic excavator for $78,000. For accounting purposes, the company depreciates the equipment linearly over a 12-year lifespan down to an estimated scrap salvage value of $6,000. Which linear equation correctly expresses the book value V(t) of the excavator for 0 ≤ t ≤ 12, what is the annual rate of depreciation, and what is the excavator's book value after exactly 7 years of service?
V(t) = -6,500t + 78,000; Annual depreciation = $6,500; Book value after 7 years = $32,500
V(t) = -6,000t + 72,000; Annual depreciation = $6,000; Book value after 7 years = $30,000
V(t) = -6,000t + 78,000; Annual depreciation = $6,000; Book value after 7 years = $36,000
V(t) = -5,500t + 78,000; Annual depreciation = $5,500; Book value after 7 years = $39,500
Sections you finish are checked off in the contents.