6.1 Perimeter, Area, Surface Area & Volume

Key Takeaways

  • Use compatible units before comparing measurements. For squared or cubed lengths, square or cube the linear conversion factor.

  • Calculate elapsed time by counting forward across hour boundaries. Report measurements at the requested precision.

  • Perimeter is length around a figure, area uses square units, and volume uses cubic units or units of capacity.

  • Use perpendicular heights for area and volume. Divide the matching prism or cylinder volume by 3 for a pyramid or cone.

  • Density compares a quantity with area or volume. Identify the unit in the denominator.

Last updated: November 2026

6.1 Perimeter, Area, Surface Area & Volume

Quick Answer: Perimeter is the total distance around the outside edge of a two-dimensional polygon, while circumference (C=2πr=πdC = 2\pi r = \pi d) measures the distance around a circle. Area measures the internal surface space enclosed by a two-dimensional shape in square units (u2u^2). Volume quantifies the three-dimensional capacity enclosed by a solid in cubic units (u3u^3), whereas surface area measures the combined area of all exterior faces. When converting units, always square the linear conversion factor for area (1 yd2=9 ft21\text{ yd}^2 = 9\text{ ft}^2) and cube it for volume (1 yd3=27 ft31\text{ yd}^3 = 27\text{ ft}^3). For composite figures, decompose the irregular shape into basic rectangles, triangles, or prisms, compute each section independently, and sum or subtract the components.


Customary and Metric Measurement Systems

The TABE Mathematics blueprints cover measurement at several levels. Decide which attribute you are measuring: length, area, volume, mass or time. Choose an appropriate unit and convert compatible quantities to the same unit before combining them.

Essential Conversion Factors Reference Table

Measurement DomainU.S. Customary EquivalenciesMetric EquivalenciesKey Relationship
Length / Distance1 foot (ft)=12 inches (in)1\text{ foot (ft)} = 12\text{ inches (in)}; 1 yard (yd)=3 ft=36 in1\text{ yard (yd)} = 3\text{ ft} = 36\text{ in}; 1 mile (mi)=5,280 ft=1,760 yd1\text{ mile (mi)} = 5,280\text{ ft} = 1,760\text{ yd}1 centimeter (cm)=10 millimeters (mm)1\text{ centimeter (cm)} = 10\text{ millimeters (mm)}; 1 meter (m)=100 cm=1,000 mm1\text{ meter (m)} = 100\text{ cm} = 1,000\text{ mm}; 1 kilometer (km)=1,000 m1\text{ kilometer (km)} = 1,000\text{ m}Base unit: meter (m); Prefixes: kilo- (10310^3), centi- (10−210^{-2}), milli- (10−310^{-3})
Weight / Mass1 pound (lb)=16 ounces (oz)1\text{ pound (lb)} = 16\text{ ounces (oz)}; 1 U.S. short ton=2,000 lb1\text{ U.S. short ton} = 2,000\text{ lb}1 gram (g)=1,000 milligrams (mg)1\text{ gram (g)} = 1,000\text{ milligrams (mg)}; 1 kilogram (kg)=1,000 g1\text{ kilogram (kg)} = 1,000\text{ g}; 1 metric ton=1,000 kg1\text{ metric ton} = 1,000\text{ kg}Mass measures quantity of matter; weight reflects gravitational force
Liquid Capacity1 cup (c)=8 fluid ounces (fl oz)1\text{ cup (c)} = 8\text{ fluid ounces (fl oz)}; 1 pint (pt)=2 c=16 fl oz1\text{ pint (pt)} = 2\text{ c} = 16\text{ fl oz}; 1 quart (qt)=2 pt=4 c=32 fl oz1\text{ quart (qt)} = 2\text{ pt} = 4\text{ c} = 32\text{ fl oz}; 1 gallon (gal)=4 qt=8 pt=128 fl oz1\text{ gallon (gal)} = 4\text{ qt} = 8\text{ pt} = 128\text{ fl oz}1 liter (L)=1,000 milliliters (mL)1\text{ liter (L)} = 1,000\text{ milliliters (mL)}; 1 centiliter (cL)=10 mL1\text{ centiliter (cL)} = 10\text{ mL}; 1 kiloliter (kL)=1,000 L1\text{ kiloliter (kL)} = 1,000\text{ L}1 cm3=1 mL1\text{ cm}^3 = 1\text{ mL}

The U.S. capacity examples use liquid pints and fluid ounces. An ounce of mass measures something different from a fluid ounce of volume. NIST Handbook 44, Appendix C

Read measurements and report appropriate precision

Use a length unit that suits the object. Inches can describe a short strip of wood; feet can describe a room. A 3-foot shelf measures 36 inches. The number of units grows when each unit is smaller, while the length stays the same. For two boards measuring 42 inches and 36 inches, subtract to find a difference of 6 inches. For two measures of liquid in the same unit, such as 650 mL and 250 mL, combining them gives 900 mL. If their units differ, rename them first.

On an analog clock, each numbered interval represents five minutes for the minute hand. When the minute hand points to 7 and the hour hand is between 2 and 3, the time is 2:35. To find elapsed time from 8:48 a.m. to 9:23 a.m., count forward 12 minutes to 9:00 and 23 more minutes to 9:23. The elapsed time is 35 minutes. Counting across the hour avoids treating clock times as ordinary decimal numbers.

Choose a reporting precision that fits the measurement. Suppose lengths of 3.42 m and 1.6 m are measurements and the problem asks for their total to the nearest tenth of a meter. Add first to obtain 5.02 m, then report 5.0 m. The final zero shows the requested place. Changing meters to centimeters changes the unit without improving how precisely the original objects were measured.

Dimensional Analysis and Unit Multipliers

To convert units accurately and avoid deciding blindly whether to multiply or divide, employ dimensional analysis (the factor-label method). Set up unit fractions equal to 1 where the unwanted unit appears in the opposite position (numerator vs. denominator) so it cancels out algebraically:

Original quantity×Equivalent amount in target unitsEquivalent amount in original units=Converted quantity\text{Original quantity}\times\frac{\text{Equivalent amount in target units}}{\text{Equivalent amount in original units}}=\text{Converted quantity}

Example 1: Convert 84 inches to feet.

84 in×(1 ft12 in)=8412 ft=7 ft84\text{ in} \times \left(\frac{1\text{ ft}}{12\text{ in}}\right) = \frac{84}{12}\text{ ft} = 7\text{ ft}

Example 2: Convert 3.5 gallons to fluid ounces.

3.5 gal×(4 qt1 gal)×(32 fl oz1 qt)=3.5×4×32 fl oz=448 fl oz3.5\text{ gal} \times \left(\frac{4\text{ qt}}{1\text{ gal}}\right) \times \left(\frac{32\text{ fl oz}}{1\text{ qt}}\right) = 3.5 \times 4 \times 32\text{ fl oz} = 448\text{ fl oz}

Converting Square and Cubic Units: The Dimensional Squaring Trap

A critical trap on TABE Levels D and A involves converting square units (area) or cubic units (volume). Linear conversion factors cannot be applied directly to square or cubic measurements:

  • Square Units (Area): Because area has two dimensions (length ×\times width), the linear conversion factor must be squared:

    1 yard=3 feet  ⟹  1 sq yd=(3 ft)×(3 ft)=9 sq ft1\text{ yard} = 3\text{ feet} \implies 1\text{ sq yd} = (3\text{ ft}) \times (3\text{ ft}) = 9\text{ sq ft} 1 foot=12 inches  ⟹  1 sq ft=(12 in)×(12 in)=144 sq in1\text{ foot} = 12\text{ inches} \implies 1\text{ sq ft} = (12\text{ in}) \times (12\text{ in}) = 144\text{ sq in} 1 meter=100 cm  ⟹  1 m2=(100 cm)×(100 cm)=10,000 cm21\text{ meter} = 100\text{ cm} \implies 1\text{ m}^2 = (100\text{ cm}) \times (100\text{ cm}) = 10,000\text{ cm}^2
  • Cubic Units (Volume): Because volume has three dimensions (length ×\times width ×\times height), the linear conversion factor must be cubed:

    1 yard=3 feet  ⟹  1 cu yd=(3 ft)×(3 ft)×(3 ft)=27 cu ft1\text{ yard} = 3\text{ feet} \implies 1\text{ cu yd} = (3\text{ ft}) \times (3\text{ ft}) \times (3\text{ ft}) = 27\text{ cu ft} 1 foot=12 inches  ⟹  1 cu ft=(12 in)3=1,728 cu in1\text{ foot} = 12\text{ inches} \implies 1\text{ cu ft} = (12\text{ in})^3 = 1,728\text{ cu in}

Exam Warning: If a room has an area of 360 sq ft360\text{ sq ft}, dividing by 3 to find square yards is incorrect. You must divide by 9: 360÷9=40 sq yd360 \div 9 = 40\text{ sq yd}.


Perimeter of Polygons and Circumference of Circles

Perimeter of Polygons

Perimeter (PP) is the total one-dimensional boundary distance enclosing a two-dimensional polygon. It is measured in linear units (such as inches, feet, or meters):

  • General Polygon: P=s1+s2+s3+⋯+snP = s_1 + s_2 + s_3 + \dots + s_n (sum of all outer sides)
  • Rectangle: P=2l+2w=2(l+w)P = 2l + 2w = 2(l + w)
  • Square: P=4sP = 4s
  • Equilateral Triangle: P=3sP = 3s

Circumference of Circles

The perimeter of a circle is called its circumference (CC). A circle is determined by its center and radius. The radius and diameter describe its size:

  • Radius (rr): The straight-line distance from the center point to any point on the outer edge.
  • Diameter (dd): The straight-line distance through the center point connecting two opposite points on the edge. The diameter is always twice the radius: d=2rd = 2r, or r=d2r = \frac{d}{2}.

The circumference is determined by multiplying the diameter by the mathematical constant pi (π\pi):

C=πd=2πrC = \pi d = 2\pi r

Follow the problem’s instruction about π\pi and rounding. Leave π\pi in an exact answer unless a numerical approximation is requested. When 3.14 or 22/7 is specified, use that approximation.

Circumference Example: A circular holding pond has a diameter of 28 feet28\text{ feet}. Using π≈227\pi \approx \frac{22}{7}, calculate the perimeter of fencing needed to enclose it:

C=πd≈227×28 ft=22×4 ft=88 feetC = \pi d \approx \frac{22}{7} \times 28\text{ ft} = 22 \times 4\text{ ft} = 88\text{ feet}

Two-Dimensional Area Formulas

Area (AA) measures the size of a region. For example, 12 unit squares cover a 3 by 4 rectangle: three rows of four without gaps or overlap. The perimeter of that rectangle is 14 units. A 2 by 5 rectangle also has a perimeter of 14 units, but its area is 10 square units. Report area in square units (such as in2\text{in}^2, ft2\text{ft}^2, or m2\text{m}^2).

Summary of Two-Dimensional Area Formulas

Geometric ShapeStandard Area FormulaRequired DimensionsKey Geometric Rules
SquareA=s2A = s^2Side length (ss)All four sides are equal; all interior angles are 90∘90^\circ
RectangleA=l×wA = l \times wLength (ll) and Width (ww)Opposite sides are equal; interior angles are 90∘90^\circ
TriangleA=12bhA = \frac{1}{2} b hBase (bb) and Height (hh)Height must be strictly perpendicular (90∘90^\circ) to the base line
ParallelogramA=b×hA = b \times hBase (bb) and Perpendicular Height (hh)Do not use the slanted side length for height
TrapezoidA=12(b1+b2)hA = \frac{1}{2}(b_1 + b_2)hParallel bases (b1,b2b_1, b_2) and Height (hh)Average the two parallel bases, then multiply by perpendicular height
CircleA=πr2A = \pi r^2Radius (rr)Square the radius before multiplying by π\pi; if given diameter, divide by 2 first

Step-by-Step Triangle and Parallelogram Altitude Rule

In both triangles and parallelograms, test problems often supply three numbers: the base, the vertical perpendicular height, and the slanted side length. Never multiply the base by the slant side to calculate area:

  • The height (hh) must form a right angle (90∘90^\circ) with the base line.
  • If a triangle has a base of 14 cm14\text{ cm}, a slant side of 10 cm10\text{ cm}, and a perpendicular height of 8 cm8\text{ cm}, its area is: A=12bh=12(14)(8)=56 cm2A = \frac{1}{2}bh = \frac{1}{2}(14)(8) = 56\text{ cm}^2

Trapezoid Calculation Walkthrough

Use the two parallel sides of a trapezoid as the bases (b1b_1 and b2b_2). The formula takes the arithmetic mean of the two bases and multiplies it by the perpendicular height:

Example: An access roadway embankment forms a trapezoid with top base b1=18 ftb_1 = 18\text{ ft}, bottom base b2=32 ftb_2 = 32\text{ ft}, and perpendicular vertical drop h=12 fth = 12\text{ ft}.

A=12(b1+b2)h=12(18+32)(12)=12(50)(12)=25×12=300 sq ftA = \frac{1}{2}(b_1 + b_2)h = \frac{1}{2}(18 + 32)(12) = \frac{1}{2}(50)(12) = 25 \times 12 = 300\text{ sq ft}

Circle Area vs. Circumference Confusion

A frequent error is mixing up the circle formulas:

  • Circumference (linear boundary): C=2πrC = 2\pi r
  • Area (surface coverage): A=πr2A = \pi r^2

To see the relationship between area and circumference, picture cutting a disk into thin sectors and alternating them point-up and point-down. The pieces approach a rectangle with height r and base C/2. Its area approaches (C/2) × r = πr².

If a circular pipe opening has an interior diameter of 10 inches10\text{ inches}:

  1. First find the radius: r=d2=102=5 inchesr = \frac{d}{2} = \frac{10}{2} = 5\text{ inches}.
  2. Compute area: A=π(5)2=25π≈25×3.14=78.5 sq inA = \pi (5)^2 = 25\pi \approx 25 \times 3.14 = 78.5\text{ sq in}.

Three-Dimensional Volume and Surface Area

Three-dimensional figures occupy physical space. They are characterized by two distinct measurements:

  1. Volume (VV): The space occupied by a solid or enclosed by a container, expressed in cubic units (in3\text{in}^3, ft3\text{ft}^3, m3\text{m}^3, or gallons/liters).
  2. Surface Area (SASA): The area of the exterior surfaces of the solid, including any curved surfaces, expressed in square units (in2\text{in}^2, ft2\text{ft}^2, m2\text{m}^2).

Primary Three-Dimensional Formulas

3D SolidVolume Formula (VV)Total Surface Area Formula (SASA)Structural Notes
Rectangular PrismV=l×w×hV = l \times w \times hSA=2(lw+lh+wh)SA = 2(lw + lh + wh)Box has 6 rectangular faces (3 opposing pairs)
CubeV=s3V = s^3SA=6s2SA = 6s^2All 6 faces are congruent squares of side ss
Right CylinderV=πr2hV = \pi r^2 hSA=2πr2+2πrhSA = 2\pi r^2 + 2\pi rhBase area B=πr2B = \pi r^2; Lateral area LA=2πrhLA = 2\pi rh

A 4 by 3 by 2 rectangular prism holds two layers of 12 unit cubes, for 24 cubic units. For a closed box, include all six rectangular faces in the surface area. For an open box, omit the missing face. If two solids share a face, the shared area is internal to the combined solid rather than part of its exterior surface.

Level A volumes and density

The base area in a pyramid or cone is multiplied by the perpendicular height and divided by 3. For a square pyramid with a 6-foot side at its base and a 9-foot vertical height, V=(1/3)(62)(9)=108V=(1/3)(6^2)(9)=108 cubic feet. For a cone with radius 3 feet and height 4 feet, V=(1/3)π(32)(4)=12πV=(1/3)\pi(3^2)(4)=12\pi cubic feet. The cylinder with the same base and height has volume 36π36\pi cubic feet, three times the cone's volume. A sphere with a 3-foot radius has volume V=(4/3)πr3=(4/3)π(27)=36πV=(4/3)\pi r^3=(4/3)\pi(27)=36\pi cubic feet. DRC Level A Mathematics blueprint

Density can compare an amount with the area or volume it occupies. If 840 people live in an area of 3 square miles, the average population density is 840 ÷ 3 = 280 people per square mile. If a rectangular sample measuring 20 cm by 10 cm by 3 cm has a mass of 1,200 g, its volume is 600 cubic centimeters and its average mass per volume is 2 grams per cubic centimeter. Keep the denominator’s units: a rate per square mile and a rate per cubic centimeter describe different attributes.

Volume vs. Surface Area Applied Distinction

To identify whether a TABE word problem demands volume or surface area, analyze what is being manipulated:

  • Calculate Volume when the problem asks about: Filling a tank with water, pouring concrete footings, air volume in an HVAC ventilation system, packing soil into a planter, or storage bin capacity.
  • Calculate Surface Area when the problem asks about: Painting exterior walls, wrapping a gift box, applying metal sheet plating, installing weatherproofing insulation, or coating a pipe.

Cylinder example: Model a closed cylindrical tank as having a radius of 3 feet3\text{ feet} and height of 8 feet8\text{ feet}. Use the same dimensions for both calculations in this idealized model and use π≈3.14\pi\approx3.14.

  1. Volume (Capacity): V=πr2h≈3.14×(3)2×8=3.14×9×8=3.14×72=226.08 cu ftV = \pi r^2 h \approx 3.14 \times (3)^2 \times 8 = 3.14 \times 9 \times 8 = 3.14 \times 72 = 226.08\text{ cu ft}
  2. Total Surface Area (Exterior Metal Required): SA=2πr2+2πrh≈2(3.14)(32)+2(3.14)(3)(8)SA = 2\pi r^2 + 2\pi rh \approx 2(3.14)(3^2) + 2(3.14)(3)(8) SA=2(3.14)(9)+2(3.14)(24)=56.52+150.72=207.24 sq ftSA = 2(3.14)(9) + 2(3.14)(24) = 56.52 + 150.72 = 207.24\text{ sq ft}

Decomposing Composite 2D and 3D Figures

Composite figures consist of two or more standard geometric shapes joined together or hollowed out. Standard formulas cannot be applied in a single step. Instead, follow a structured decomposition strategy:

Strategy 1: Additive Decomposition (Combining Shapes)

  1. Draw auxiliary lines to partition the irregular shape into basic, non-overlapping rectangles, triangles, or semicircles.
  2. Deduce missing side lengths by comparing parallel segments.
  3. Compute the area of each individual sub-region.
  4. Sum all individual areas to find the total area.

L-Shaped Floor Plan Example: An L-shaped office floor has outer dimensions: bottom edge 24 ft24\text{ ft}, left edge 16 ft16\text{ ft}, top edge 10 ft10\text{ ft}, and right vertical edge 7 ft7\text{ ft}.

  • Missing inner horizontal edge: 24−10=14 ft24 - 10 = 14\text{ ft}.
  • Missing inner vertical edge: 16−7=9 ft16 - 7 = 9\text{ ft}.
  • Split horizontally into two rectangles:
    • Top rectangle: 10 ft×9 ft=90 sq ft10\text{ ft} \times 9\text{ ft} = 90\text{ sq ft}
    • Bottom rectangle: 24 ft×7 ft=168 sq ft24\text{ ft} \times 7\text{ ft} = 168\text{ sq ft}
  • Total floor area: 90+168=258 sq ft90 + 168 = 258\text{ sq ft}.

Strategy 2: Subtractive Decomposition (Cutting Out Shapes)

When an irregular figure is formed by removing a shape from a larger bounding region (such as a picture frame, a washer, or a lawn with an installed swimming pool):

  1. Calculate the area of the entire outer bounding figure.
  2. Calculate the area of the inner unshaded or removed cutout region.
  3. Subtract the cutout area from the outer area: Anet=Aouter−AcutoutA_{\text{net}} = A_{\text{outer}} - A_{\text{cutout}}.

Applied Workplace Word Problems

Flooring and Carpeting Estimation

Flooring problems combine area calculation, waste factors, and unit conversion from square feet to square yards:

  • Step 1: Calculate gross room area in square feet (A=l×wA = l \times w).
  • Step 2: Convert square feet to square yards by dividing by 9 (Ayd2=Aft29A_{\text{yd}^2} = \frac{A_{\text{ft}^2}}{9}).
  • Step 3: Add specified waste factor (e.g., multiply by 1.101.10 for a 10%10\% waste allowance).
  • Step 4: Multiply required square yards by unit price.

Wall Painting Estimation

Painting problems require calculating the net paintable wall surface:

  • Step 1: Calculate total gross wall area (Proom×heightP_{\text{room}} \times \text{height}, or the sum of all individual wall rectangles).
  • Step 2: Subtract non-painted areas (windows, doorways, built-in cabinets).
  • Step 3: Multiply net area by the number of coats required.
  • Step 4: Divide total coverage needed by the coverage rating per gallon given in the problem. If the material is sold only by the whole gallon, buy the smallest whole number of gallons that covers the required area.
Loading diagram...
Choose the measurement and calculate with consistent units
Test Your Knowledge

A facility manager needs to replace the commercial carpet in a rectangular conference room measuring 27 feet long and 20 feet wide. Commercial carpet is priced at $32.00 per square yard. The contractor specifies ordering an additional 10% of material to account for cutting waste, pattern matching, and seams. What is the total cost of the carpet required for this room?

A

$1,728.00 (based on ordering 54 square yards)

B

$2,112.00 (based on ordering 66 square yards)

C

$2,304.00 (based on ordering 72 square yards)

D

$19,008.00 (based on ordering 594 square feet at the square yard rate)

Test Your Knowledge

An exterior wall of an industrial storage building has the shape of a trapezoid with a bottom base of 36 feet, a top base of 24 feet, and a vertical height of 16 feet. The wall has three nonoverlapping openings: two identical rectangular loading doors measuring 8 feet wide by 10 feet high, and a circular exhaust port with a diameter of 4 feet. A painter applies two coats of weatherproofing sealant to the exposed wall surface. If one gallon of sealant covers exactly 400 square feet, how many whole gallons of sealant must be purchased? (Use π ≈ 3.14).

A

1 gallon

B

3 gallons

C

2 gallons

D

4 gallons

Test Your Knowledge

A cylindrical water holding tank at a processing plant has an interior diameter of 14 feet and a vertical height of 20 feet. Using the approximation π ≈ 22/7, what are the approximate full capacity and the approximate volume of water inside when the tank is filled to exactly 75% of its total capacity?

A

Maximum volume = 3,080 cu ft; 75% capacity = 2,310 cu ft

B

Maximum volume = 12,320 cu ft; 75% capacity = 9,240 cu ft

C

Maximum volume = 880 cu ft; 75% capacity = 660 cu ft

D

Maximum volume = 6,160 cu ft; 75% capacity = 4,620 cu ft

Test Your Knowledge

A session starts at 10:47 a.m. and ends at 11:16 a.m. How long does it last?

A

16 minutes

B

27 minutes

C

31 minutes

D

29 minutes

Test Your Knowledge

A cone has a circular base with radius 3 inches and a perpendicular height of 5 inches. What is its exact volume?

A

45π45\pi cubic inches

B

15π15\pi cubic inches

C

5π5\pi cubic inches

D

9π9\pi cubic inches

Sections you finish are checked off in the contents.