4.3 Decimals, Percents & Everyday Practical Applications

Key Takeaways

  • Decimals use powers of ten to represent place value. Trailing zeros preserve the value.

  • Use the correct place values in decimal arithmetic. Multiplying both parts of a quotient by the same nonzero factor preserves it.

  • For a positive starting value, signed percent change is the signed difference divided by the starting value. A negative change can be reported as a positive percent decrease.

  • Match the base amount and time units to the rates specified in the problem.

Last updated: November 2026

4.3 Decimals, Percents & Everyday Practical Applications

Quick Answer: Compare decimal digits by place value and keep track of place values when operating. For a positive starting value, signed percent change is the new value minus the old value, divided by the old value and expressed as a percent. A result of −30% is a 30% decrease. In simple interest, match the time unit to the rate period.


The Decimal Place Value System

From the ones place to the left, place values grow by a factor of 10 each step (10⁰ = 1, 10¹ = 10, 10² = 100). To the right, they shrink by a factor of 10 (10⁻¹ = 1/10, 10⁻² = 1/100, 10⁻³ = 1/1,000). Multiplying by 10³ shifts each digit three places toward larger place values, so 27 × 10³ = 27,000 and 2.7 × 10³ = 2,700. Dividing by 10² shifts each digit two places toward smaller place values, so 2.7 ÷ 10² = 0.027. Use zeros to fill empty places as needed.

Place Value Chart to Ten-Thousandths

Whole ValueDecimal PointTenthsHundredthsThousandthsTen-Thousandths
Ones (10⁰).1/10 (10⁻¹)1/100 (10⁻²)1/1,000 (10⁻³)1/10,000 (10⁻⁴)
0.1000
0.0100
0.0010
0.0001

In the decimal number 0.7425:

  • 7 is in the tenths place (value: 0.7 or 7/10).
  • 4 is in the hundredths place (value: 0.04 or 4/100).
  • 2 is in the thousandths place (value: 0.002 or 2/1,000).
  • 5 is in the ten-thousandths place (value: 0.0005 or 5/10,000).

Comparing, Ordering, and Rounding Decimals

1. Comparing Decimals by Annexing Zeros

To compare nonnegative decimal numbers:

  1. Align the decimal points vertically.
  2. Annex trailing zeros to make all numbers equal in length.
  3. Compare digits from left to right at the first place value where they differ.
  • Example: Compare 0.62 and 0.618:
    • Annex a zero to 0.62 to match three decimal places: 0.620 vs. 0.618.
    • Tenths digits are identical (6 = 6).
    • Hundredths digits differ: 2 > 1, so 0.62 > 0.618.

2. Rounding Decimals

For a nonnegative decimal using the common rounding rule, find the required place. The next digit keeps it unchanged for 0–4 or increases it by one for 5–9. Regroup if needed. Report the number to the specified place, including trailing zeros when they communicate the requested precision.

  • Round 4.836 to the nearest tenth: Target digit is 8; neighbor is 3 → 4.8.
  • Round 19.475 to the nearest hundredth (nearest cent): Target digit is 7; neighbor is 5 → 19.48.

Decimal Arithmetic Operations & Algorithms

1. Adding and Subtracting Decimals

  • Rule: Strictly align the decimal points vertically so that identical place values sit in the same column. Add placeholder zeros to either number as needed to make the places easier to track.
  • Example: Compute 42.6 - 8.375:
    • Top number with trailing zeros: 42.600
    • Bottom number aligned: 8.375
    • Subtract with regrouping: 42.600 - 8.375 = 34.225.

2. Multiplying Decimals

  • Rule: Multiply the digits as whole numbers, then determine the sign if either factor is negative. Count the total number of decimal places in both factors combined. Place the decimal point in the product that exact number of places from the right.
  • Example: Compute 3.25 × 0.4:
    • Multiply as whole numbers: 325 × 4 = 1,300.
    • Count decimal places: 3.25 has 2 places; 0.4 has 1 place → total of 2 + 1 = 3 places.
    • Count 3 places from the right in 1,300: 1.300 = 1.3.

3. Dividing Decimals

  • Rule: For this long-division method, use a nonzero divisor. Multiply both the dividend and divisor by the same power of 10 so the divisor has no fractional part. This preserves the quotient. Track signs separately when using the written algorithm.
    1. Move the decimal point in the divisor to the right until it becomes an integer.
    2. Move the decimal point in the dividend (inside number) to the right by the exact same number of places (annex zeros if the dividend runs out of digits).
    3. Place the decimal point on the quotient line directly above its new position in the dividend.
    4. Divide normally.
  • Example: Compute 18.72 ÷ 0.6:
    • Divisor is 0.6: move decimal 1 place right to make it 6.
    • Dividend is 18.72: move decimal 1 place right to make it 187.2.
    • Divide: 187.2 ÷ 6 = 31.2.

The Fraction — Decimal — Percent Equivalence Triad

Fractions, decimals and percents can express the same amount. A percent is a rate per 100. A rational number can have a terminating or repeating decimal representation. Use an exact fraction or repeating notation if rounding is not requested.

Conversion Algorithms

  • Fraction → Decimal: Divide the numerator by the denominator (3/8 = 3 ÷ 8 = 0.375).
  • Decimal → Percent: Multiply by 100 (shift decimal point 2 places right) and attach the % symbol (0.375 = 37.5%).
  • Percent → Decimal: Divide by 100 (shift decimal point 2 places left) and remove the % symbol (6.5% = 0.065).
  • Decimal → Fraction: Read the place value of the final digit, place the digits over that power of 10 (0.045 = 45/1,000), and simplify to lowest terms ((45 ÷ 5) / (1,000 ÷ 5) = 9/200).

Master Benchmark Conversions Table

These common conversions give you benchmarks for estimating and checking answers:

FractionDecimalPercentFractionDecimalPercent
1/100.1010%3/50.6060%
1/80.12512.5%5/80.62562.5%
1/60.166...16 2/3%2/30.666...66 2/3%
1/50.2020%3/40.7575%
1/40.2525%4/50.8080%
1/30.333...33 1/3%5/60.833...83 1/3%
3/80.37537.5%7/80.87587.5%
2/50.4040%11.00100%
1/20.5050%5/4 (1 1/4)1.25125%

Calculating Percent of a Number and the Percent Equation

The fundamental relationship connecting parts, wholes, and percentages is expressed by the Percent Equation:

Part=Percent (as decimal)×Whole(P=r×W)\text{Part} = \text{Percent (as decimal)} \times \text{Whole}\quad (P = r \times W)
  • To find 35% of 240: P = 0.35 × 240 = 84
  • To find what percent 45 is of 180: Provided the whole is nonzero, r = Part / Whole = 45 / 180 = 0.25 = 25%
  • To find the whole when 60 is 40% of a number: Provided the rate is nonzero, W = Part / r = 60 / 0.40 = 150

Percent change: signed result and size of a decrease

For a positive original value, compute the signed difference first. Divide it by the original value and express the result as a percentage.

Signed percent change=New value−Original valueOriginal value×100%\text{Signed percent change} = \frac{\text{New value} - \text{Original value}}{\text{Original value}} \times 100\%

A positive result indicates an increase, a negative result a decrease, and zero means no change. When a question asks for the percent decrease, give the size of the decline as a positive percentage. The old value is the denominator because it is the amount you started with. If the original value is zero, ordinary percent change is undefined. An increase from 0 to 12 can be reported as an increase of 12 units.

  • An hourly rate goes from $20 to $25. The signed difference is $5. Divide by $20 to get 0.25, or +25%.
  • A defect count drops from 150 to 105. The change is −45. Divide by 150 to get −0.30, or −30%. The percent decrease is 30%.
  • Reversing the first comparison means going from $25 to $20. Now the difference is −$5 and the base is $25, giving −20%. The same dollar difference can represent different percentages if the starting amounts differ.

The U.S. Bureau of Labor Statistics uses this signed change method for positive price indexes.

Everyday Financial Applications

1. Sales Tax and Total Purchase Price

If a problem gives you a taxable price and a tax rate, multiply the taxable amount by the stated rate:

  • Sales Tax Amount = Sticker Price × Tax Rate
  • Total Price = Sticker Price + Sales Tax = Sticker Price × (1 + Tax Rate)
  • Example: An equipment drill costs $180.00 with a 7.5% sales tax: Total = 180 × (1 + 0.075) = 180 × 1.075 = $193.50

2. Discounts, Markdowns, and Net Sale Price

A discount represents a reduction from the regular retail price:

  • Discount Amount = Original Price × Discount Rate
  • Sale Price = Original Price - Discount = Original Price × (1 - Discount Rate)
  • Example: A toolbox listed at $240.00 is on sale for 30% off: Sale Price = 240 × (1 - 0.30) = 240 × 0.70 = $168.00

3. Restaurant Gratuities and Service Tips

Suppose a customer chooses to tip on the stated pre-tax amount. These mental calculations show 10%, 20% and 15% of that amount:

  • 10% Tip: Shift the decimal point one place to the left ($64.00 → $6.40).
  • 20% Tip: Double the 10% value ($6.40 × 2 = $12.80).
  • 15% Tip: Add the 10% value to half of itself ($6.40 + $3.20 = $9.60).

4. Sales Commissions

If a pay plan specifies a base salary and a fixed commission rate on eligible sales, add the base salary to the commission on the stated sales amount:

Total Earnings=Base Salary+(Commission Rate×Sales Volume)\text{Total Earnings} = \text{Base Salary} + (\text{Commission Rate} \times \text{Sales Volume})

5. Simple Interest Formula

Simple interest is interest calculated solely on the original principal balance over a specified duration:

I=PrtI = Prt

Where:

  • II = Total interest earned or paid in dollars
  • PP = Principal amount (initial amount invested or borrowed)
  • rr = Annual interest rate expressed as a decimal (6% = 0.06)
  • tt = Time in years when rr is an annual rate. If the rate is per month, use time in months.

Handling Fractional Years in Simple Interest:

When the problem gives an annual rate and expresses time in complete months, use this year conversion for the stated simple-interest model:

t=Number of Months12t = \frac{\text{Number of Months}}{12}
  • 6 months: t = 6 / 12 = 0.5 years
  • 18 months: t = 18 / 12 = 1.5 years
  • 30 months: t = 30 / 12 = 2.5 years

Total Maturity Amount:

In a simple-interest example with no interim payments or additional charges, final amount AA is the sum of principal and accrued interest:

A=P+I=P(1+rt)A = P + I = P(1 + rt)
Loading diagram...
Convert fractions, decimals and percentages
Test Your Knowledge

A fictional transit program counted 640 on-time trips in May and 496 in June. What is the signed percent change from May to June?

A

−22.5%

B

+22.5%

C

−29.0%

D

+31.5%

Test Your Knowledge

An example loan of $7,200 accrues simple interest at an annual rate of 7.5% for 30 months. There are no payments or additional charges during the term. What is the principal plus interest at the end?

A

$1,350

B

$8,280

C

$8,425

D

$8,550

Test Your Knowledge

A compressor is marked $650 and has a 20% discount. For this purchase, a 7.5% tax applies to the discounted price. What is the total?

A

$520.00

B

$548.50

C

$559.00

D

$568.75

Sections you finish are checked off in the contents.