6.2 Angles, Triangles & the Pythagorean Theorem
Key Takeaways
Classify shapes by their attributes. A square is both a rectangle and a rhombus. Use the correct zero baseline to measure an angle, and add non-overlapping angle parts.
Parallel lines give equal corresponding and alternate angles, and supplementary same-side interior pairs. Perpendicular crossings form right angles.
Triangle angles sum to 180° in the plane. A standard exterior angle equals the sum of the two remote interior angles.
Rigid motions establish congruence. A dilation plus rigid motions can establish similarity. Use corresponding lengths and angles in the same order.
Use a² + b² = c² for a right triangle, with the hypotenuse opposite the right angle.
6.2 Angles, Triangles & the Pythagorean Theorem
Quick Answer: Angles are classified by their degree measures: acute (), right (), obtuse ( and ), and straight (). Complementary angles add to , supplementary angles add to , and vertical angles across intersecting lines are congruent. When a slanted transversal crosses parallel lines without forming right angles, the four acute angles share one measure and the four obtuse angles share another. An acute and an obtuse angle from this figure add to . A perpendicular transversal makes eight right angles. A Euclidean triangle's interior angles sum to . For right triangles, the Pythagorean Theorem states , where is the hypotenuse opposite the right angle and and are the perpendicular legs.
Recognizing Shapes by Their Attributes
A point marks a position. A line extends in both directions, a line segment has two endpoints and includes the points between them, and a ray starts at one endpoint and extends in one direction. On paper, use dots for endpoints and arrowheads for directions that continue. Distinct parallel lines in the same plane never meet. Perpendicular lines meet at right angles. A circle is the set of points in a plane at a fixed positive distance from its center.
For straight-sided figures, count sides and vertices before using any more specific category. A triangle has three sides, a quadrilateral four, a pentagon five, and a hexagon six. A cube is a three-dimensional solid with six congruent square faces. Counting six faces on a solid is different from counting six sides around a flat figure.
A rectangle is a quadrilateral with four right angles. A rhombus is a quadrilateral with four equal sides. A square satisfies both descriptions, so it inherits the properties of both categories. Use the marks on a diagram, such as corner squares and equal-side ticks, to decide what has been given. For example, draw a quadrilateral with vertices , , , and in order. It has four sides, but the slanted side prevents it from being a rectangle and the sides of lengths and prevent it from being a rhombus or a square.
Angle Fundamentals and Geometric Angle Relationships
An angle is formed by two rays sharing a common endpoint called the vertex. Measure the turn from one ray to the other in degrees (). One degree is of a full turn, so a quarter turn measures .
Primary Angle Classifications
- Acute Angle: Measures strictly between and ().
- Right Angle: Measures exactly (). Formed by perpendicular lines and designated on geometric diagrams with a square corner box symbol.
- Obtuse Angle: Measures strictly between and ().
- Straight Angle: Measures exactly (). A straight angle forms a collinear straight line.
- Reflex Angle: Measures strictly between and ().
Measuring, Drawing and Adding Angles
To measure an angle up to , center the protractor on the vertex and place one ray along the zero baseline. Follow the numbers that start at zero on that ray. Where the second ray crosses the arc, read that scale. If the scales show and and the opening is visibly smaller than a right angle, use . You can extend a short ray without changing the opening. To draw , start with a baseline ray, mark on the correct scale, and draw a second ray from the same vertex through the mark.
Angle measures add when the parts do not overlap. If a ray inside that opening splits it into and , then , so . Line up all parts at the same vertex before adding.
Special Angle Pairs
Recognizing angle relationships enables examinees to write and solve algebraic equations for unknown measures:
-
Complementary Angles: Two angles whose measures sum to exactly :
Example: If and are complementary and , then .
-
Supplementary Angles: Two angles whose measures sum to exactly :
Example: If and are supplementary and , then .
-
Adjacent Angles: Two angles that share a common vertex and a common ray (side) but share no interior points.
-
Linear Pair: Two adjacent angles whose non-common rays form a straight line. A linear pair is always supplementary ().
-
Vertical Angles: Two non-adjacent angles formed opposite each other by the intersection of two straight lines. Number an intersection across the top as 1 and 2 (left to right) and across the bottom as 3 and 4 (left to right). Vertical angles are always congruent (equal in measure):
Parallel Lines Intersected by a Transversal
A transversal is a line that intersects two or more coplanar lines at distinct points. When the two lines intersected are parallel (), eight distinct angles are created that share predictable geometric relationships.
Transversal Angle Relationships Overview
Picture two horizontal parallel lines and a transversal that slants upward from left to right. On the upper intersection, label the top-left, top-right, bottom-left and bottom-right corners as 1, 2, 3 and 4. Repeat the same order at the lower intersection with 5, 6, 7 and 8. In this arrangement 1 and 4 are an obtuse vertical pair, and 2 and 3 are an acute vertical pair. Parallelism makes corresponding corners match. For example, 3 and 7 correspond, and 7 and 6 are vertical angles, so alternate interior angles 3 and 6 also match. Angles 5 and 6 form a linear pair, so 5 and 3 must add to 180°.
| Angle Pair Classification | Relative Geometric Position | Relationship (When ) | Algebraic Formula |
|---|---|---|---|
| Corresponding Angles | Same relative corner at each intersection | Congruent | , , , |
| Alternate Interior Angles | Opposite sides of transversal, between parallel lines | Congruent | , |
| Alternate Exterior Angles | Opposite sides of transversal, outside parallel lines | Congruent | , |
| Consecutive Interior Angles | Same side of transversal, between parallel lines | Supplementary | , |
| Consecutive Exterior Angles | Same side of transversal, outside parallel lines | Supplementary | , |
The Two Angle Measures for a Slanted Transversal
When two parallel lines are cut by any non-perpendicular transversal, exactly two distinct angle measures exist among all eight angles:
- All four acute angles are equal to each other.
- All four obtuse angles are equal to each other.
- Any acute angle combined with any obtuse angle sums to .
One angle measure, the parallel marks and the corner positions determine the other seven measures. If the transversal is perpendicular, all eight measure 90°. For lines that are not parallel, a vertical pair at one intersection still matches, but that alone gives no matching measure at the other intersection.
Triangle Classifications and Angle Theorems
A triangle is a three-sided closed polygon. Triangles are classified simultaneously by their interior angles and by their side lengths.
Classification by Angles
- Acute Triangle: All three interior angles measure strictly less than .
- Right Triangle: Exactly one interior angle measures . The remaining two acute angles are complementary (sum to ).
- Obtuse Triangle: Exactly one interior angle measures greater than . The remaining two angles must be acute.
Classification by Sides
- Equilateral Triangle: All three side lengths are equal (). All three interior angles are also equal, measuring exactly each ().
- Isosceles Triangle: At least two side lengths are equal. The angles opposite the equal sides (called base angles) are congruent.
- Scalene Triangle: All three side lengths are pairwise different. All three interior angles then have different measures, too.
Fundamental Triangle Theorems
-
Triangle Angle Sum Theorem: The sum of the interior angles in any Euclidean triangle is always exactly :
Draw a line through vertex parallel to side . The sides and cross those parallel lines. The two angles on either side of the angle at along the new straight line match angles and by alternate interior angles. Together the three pieces make a straight angle.
-
Exterior Angle Theorem: The measure of an exterior angle of a triangle equals the sum of the measures of the two non-adjacent (remote) interior angles:
-
Triangle Inequality Theorem: The sum of the lengths of any two sides of a triangle must be strictly greater than the length of the third side:
Example: Can sides measuring , , and form a triangle? No, because , which is not greater than .
Congruence, Similarity and Transformations
Figures are congruent if translations (slides), reflections (flips), rotations (turns), or a sequence of these rigid motions can map one onto the other. Those moves preserve lengths and angle measures. Similar figures may also need a dilation (scaling from a center). A dilation with positive factor multiplies all lengths by and preserves angle measures. Similarity uses one scale factor for corresponding lengths. The matching order of triangle names matters. In , side corresponds to and angle corresponds to angle .
For example, start with vertices , and . Reflect across the -axis, sending to . Then translate three units right and one unit up. The resulting vertices , and are congruent to the originals. Starting again from the original triangle, dilate from the origin by factor 2 to get , and . The two triangles are similar. Rotating a figure a quarter turn counterclockwise about the origin sends to , so would go to in that different move. Follow each vertex through the actual sequence.
For triangles, SSS (three corresponding equal sides), SAS (two corresponding equal sides and the included equal angle), and ASA (two corresponding equal angles and the included equal side) establish congruence. For similarity, AA (two corresponding angle pairs equal) suffices, since the third angle pair also matches by the angle-sum rule. Proportional SSS or proportional SAS with an equal included angle also establishes similarity. Be careful with the included angle: it sits between the two given sides.
Worked similarity: A line meets the sides and of triangle at and and is parallel to . Both triangles share the angle at . Corresponding angles at and match because the line through is parallel to . Therefore by AA. If , and , solve to get . The factor compares small to large in both ratios.
The Pythagorean Theorem
The Pythagorean Theorem applies to a right triangle ( right angle). Conversely, if positive side lengths of a triangle satisfy with the longest, the triangle is right.
Formula and Anatomy of a Right Triangle
- Legs ( and ): The two shorter sides that intersect perpendicularly to form the right angle.
- Hypotenuse (): The longest side of the right triangle. It is always located directly opposite the right angle.
Solving for Unknown Sides
-
Solving for the Hypotenuse ():
Step-by-step: Square leg , square leg , sum the squares, and take the principal square root.
-
Solving for a Missing Leg ( or ):
Step-by-step: Square the hypotenuse , square the known leg, subtract the leg's square from the hypotenuse's square, and take the square root.
Common Pythagorean Triples (Speed Strategy)
A Pythagorean triple consists of three positive integers that satisfy . Memorizing fundamental triples and their scalar multiples allows examinees to solve right-triangle problems in seconds without writing out square root algorithms:
| Base Triple Family | Common Scaled Multiples () | Verification Check |
|---|---|---|
| 3 – 4 – 5 | , , , , | |
| 5 – 12 – 13 | , , | |
| 8 – 15 – 17 | , | |
| 7 – 24 – 25 |
Exam Tip: If a right triangle has a hypotenuse of and one leg of , notice that and . This is a scaled triple (). The missing leg must be .
Special Right Triangles Overview
These two special right triangles follow from the same theorem:
- Triangle (Isosceles Right): A square diagonal cuts the square into two of these triangles. If each leg is , the hypotenuse is .
- Triangle: Formed by drawing the altitude from a vertex of an equilateral triangle to the midpoint of the opposite side. With an equilateral side of , half the base is and the hypotenuse is . The altitude is .
Practical Workplace Word Problems
1. Wall and Floor Distance
A straight segment from a point on a vertical wall to a point on its level floor forms the hypotenuse of a right triangle when the floor leg runs straight out from the wall:
- The wall represents vertical leg .
- The horizontal distance measured straight out from the wall is leg .
- The straight connecting segment is hypotenuse .
2. Diagonal Pathways and Distance Savings
For opposite corners of a rectangle of positive length and width, compare the direct diagonal with a route along two sides:
- Perimeter walking distance:
- Diagonal walking distance:
- Distance saved:
3. Structural Guy Wires and Mast Support
A straight segment from an anchor on level ground to a point directly above the base of a vertical mast forms the hypotenuse. The anchor-to-base distance along the ground and the height at attachment are the legs. Use both legs in the same unit.
4. Distance Through a Rectangular Box
To find the distance between opposite corners of a rectangular box in by in by in, first find the base diagonal in. That diagonal and the -in vertical edge are perpendicular, so the space diagonal is in. Identify both right triangles before solving.
Two parallel access corridors in a distribution warehouse are crossed diagonally by an automated conveyor track. The conveyor forms two alternate interior angles labeled (3x + 15)° and (5x - 25)°. What is the numerical value of x, what is the measure of each alternate interior angle, and what is the measure of an adjacent angle that forms a linear pair with one of these angles?
x = 10; alternate interior angle = 45°; adjacent linear pair = 135°
x = 15; alternate interior angle = 60°; adjacent linear pair = 120°
x = 25; alternate interior angle = 90°; adjacent linear pair = 90°
x = 20; alternate interior angle = 75°; adjacent linear pair = 105°
In a structural triangular roof truss ABC, peak angle B measures 68°. The two base angles at vertex A and vertex C satisfy the condition that angle A is 16° larger than angle C. A support strut extends past vertex C along the flat horizontal chord AC, forming an exterior angle to the truss at vertex C. What are the interior measures of angle A and angle C, and what is the measure of the exterior angle at vertex C?
Angle A = 56°; Angle C = 56°; Exterior angle = 124°
Angle A = 64°; Angle C = 48°; Exterior angle = 132°
Angle A = 72°; Angle C = 40°; Exterior angle = 140°
Angle A = 80°; Angle C = 32°; Exterior angle = 148°
A diagram shows a vertical mast 36 feet tall and its base is 27 feet from an anchor on level ground. Find the straight-line distance from the anchor to the top and the length of the route from the anchor to the base and then up to the top.
45 feet straight and 63 feet along the two legs
45 feet straight and 81 feet along the two legs
63 feet straight and 45 feet along the two legs
36 feet straight and 63 feet along the two legs
A learner draws a quadrilateral with four equal sides. One corner aligns with 90° on a protractor. Which conclusion follows?
Only the one measured angle is 90°.
The figure is a rhombus, but cannot be a rectangle.
The figure is a rectangle but cannot be a rhombus.
The figure is a square and belongs to both the rectangle and rhombus categories.
On a grid, triangle ABC is mapped to a new triangle by reflecting it across the y-axis and then dilating by factor 3 about the origin. If AB is 4 units and angle B is 52°, what happens to their matching side and angle?
The side is 4 units and the angle is 156°.
The side is 12 units and the angle is 52°.
The side is 12 units and the angle is 156°.
The side is 4 units and the angle is 52°.
Sections you finish are checked off in the contents.