5.1 Ratios, Unit Rates & Proportional Relationships

Key Takeaways

  • Keep a ratio in the requested direction and compare like units when computing a dimensionless scale factor.

  • Equivalent ratios can be set equal when their denominators are nonzero. Cross-products, unit rates and scale factors are useful solving methods.

  • In a table for y=kxy=kx, the nonzero inputs give the same y/xy/x and a zero input must have zero output.

  • Proportional data points lie on a line through the origin. Perimeters scale by the length factor, and areas by its square.

Last updated: November 2026

5.1 Ratios, Unit Rates & Proportional Relationships

Quick Answer: A rate expresses a comparison per unit, such as miles per gallon. A proportion equates two ratios with nonzero denominators. In y=kxy=kx, compute k=y/xk=y/x at a nonzero input. A zero input must have zero output if it is part of the domain.


Ratio Fundamentals: Part-to-Part vs. Part-to-Whole

A ratio is a mathematical comparison of two numbers or quantities by division. In adult education assessments like the TABE 13 & 14, ratios frequently model workforce staffing, manufacturing ingredient blends, financial allocations, and inventory management.

The Three Standard Notations

A comparison a to b with a nonzero second term can be represented in these three forms:

  1. Colon Notation: a:ba:b (read as "aa to bb")
  2. Verbal Phrasing: "aa to bb"
  3. Fractional Form: ab\frac{a}{b} (where the second term b≠0b \neq 0)

Regardless of notation, order is paramount. Read the comparison in the direction requested. For supervisors to technicians, write the number of supervisors first. Reversing the order describes the opposite comparison, and the numbers can change unless the counts match.

Part-to-Part vs. Part-to-Whole Relationships

Understanding whether a problem presents a part-to-part or part-to-whole comparison is essential for avoiding common algebraic traps:

  • Part-to-Part: Compares one specific subset within a group to another distinct subset within the same group.
  • Part-to-Whole: Compares a specific subset to the complete aggregate total (the sum of all parts).

Workplace Application: Manufacturing Staffing

Consider a precision manufacturing facility staffed by 15 certified CNC machinists and 25 apprentice operators. Those are the only two groups in the example, so the total is 15+25=4015 + 25 = 40 workers.

Comparison TypeVerbal DescriptionRatio SetupSimplified Ratio
Part-to-PartMachinists to Apprentices15:2515 : 253:53 : 5 (divide by GCF 5)
Part-to-PartApprentices to Machinists25:1525 : 155:35 : 3 (order reversed)
Part-to-WholeMachinists to Total Staff1540\frac{15}{40}38\frac{3}{8}
Part-to-WholeApprentices to Total Staff2540\frac{25}{40}58\frac{5}{8}

Notice that the sum of the part-to-whole fractions equals 1: 38+58=88=1.0\frac{3}{8} + \frac{5}{8} = \frac{8}{8} = 1.0. On TABE test items, examinees are often given a part-to-part ratio (e.g., "the ratio of defective parts to acceptable parts is 1 to 24") and asked what fraction of the total production run is defective. The correct part-to-whole fraction is 11+24=125\frac{1}{1 + 24} = \frac{1}{25}, not 124\frac{1}{24}.

Simplifying Ratios

With positive whole-number terms you can write a simpler equivalent ratio by dividing both by their greatest common factor. Keep the original numbers when they convey useful information. For a unitless size comparison of like quantities, convert to the same unit before taking the ratio. A rate such as miles per hour keeps the two different units. For example, the ratio of 8 inches to 2 feet must first be converted to matching units: since 2 feet=24 inches2\text{ feet} = 24\text{ inches}, the ratio is 8 inches24 inches=13\frac{8\text{ inches}}{24\text{ inches}} = \frac{1}{3}.


Rates and Calculating Unit Rates

While a ratio often compares two quantities with identical units, a rate is a specialized ratio that compares two quantities measured in different units (e.g., miles per hour, dollars per gallon, or beats per minute).

The Unit Rate Defined

A unit rate is a rate in which the denominator is reduced to exactly 1 unit. Computing a unit rate requires dividing the numerator by the denominator:

A units of the first kindB units of the second kind=(A÷B) units of the first kind1 unit of the second kind(B≠0)\frac{A\text{ units of the first kind}}{B\text{ units of the second kind}} = \frac{(A \div B)\text{ units of the first kind}}{1\text{ unit of the second kind}}\quad (B\ne 0)

Common Real-World Unit Rate Scenarios

  1. Automotive Fuel Efficiency (Miles per Gallon):
    • Scenario: A commercial delivery van travels 385 miles on 14 gallons of diesel fuel.
    • Calculation: 385 miles14 gallons=27.5 miles per gallon (mpg)\frac{385\text{ miles}}{14\text{ gallons}} = 27.5\text{ miles per gallon (mpg)}.
  2. Comparative Unit Pricing (Best Buy Analysis):
    • Scenario: A maintenance supervisor compares two bulk purchasing options for industrial lubricant:
      • Brand Alpha: 32 fluid ounces for $11.84
      • Brand Beta: 48 fluid ounces for $16.80
    • Brand Alpha Unit Price: 11.8432=0.37\frac{11.84}{32} = 0.37 dollars per fluid ounce
    • Brand Beta Unit Price: 16.8048=0.35\frac{16.80}{48} = 0.35 dollars per fluid ounce
    • Conclusion: Brand Beta provides the superior economic value, saving $0.02 per fluid ounce.
  3. Average productivity:
    • Scenario: A warehouse order fulfillment team packages 540 parcels over a 4.5-hour operational shift.
    • Calculation: 540 parcels4.5 hours=120 parcels per hour\frac{540\text{ parcels}}{4.5\text{ hours}} = 120\text{ parcels per hour}.

Unit rates formed from fractions

Suppose a delivery worker bikes 3/4 mile in 1/8 hour. The rate is miles per hour, so divide the distance by the time. The calculation is (3/4)÷(1/8)=(3/4)×8=6(3/4) \div (1/8) = (3/4)\times8 = 6 miles per hour. An eighth of an hour is 7 1/2 minutes, and eight equal intervals at the same rate would cover 6 miles. DRC Level D Mathematics blueprint

Setting Up and Solving Proportions via Cross-Multiplication

A proportion is an algebraic equation stating that two ratios or rates are equivalent:

ab=cd(where b≠0,d≠0)\frac{a}{b} = \frac{c}{d} \quad (\text{where } b \neq 0, d \neq 0)

The Fundamental Property of Proportions (Cross-Products)

In any true proportion, the cross-products are strictly equal. That is, multiplying diagonally across the equals sign produces an equivalent equality:

a⋅d=b⋅ca \cdot d = b \cdot c

If one term is unknown, cross-multiplication often gives a linear equation. Exclude values that make either original denominator zero. Divide by a coefficient only if it is nonzero. You can also solve by a common scale factor or by finding a unit rate.

The 4-Step Proportion Problem-Solving Framework

To solve any TABE proportion word problem accurately, follow this disciplined sequence:

  1. Establish the Unit Template: Write down the categorical units in the numerator and denominator before writing any numbers (e.g., meters of trimpanels\frac{\text{meters of trim}}{\text{panels}}).
  2. Populate the Proportion: Insert the given values and unknown variable xx into their respective matching positions.
  3. Execute Cross-Multiplication: Multiply diagonally to formulate an algebraic equation (ad=bcad = bc).
  4. Solve and check: Isolate the unknown if its coefficient is nonzero. Check units and substitute into the original proportion.

Worked example: a supply estimate

A workshop uses 15 meters of trim for every 40 identical panels. What length will it use for 180 panels at the same rate?

  1. Put trim in the numerator and panel count in the denominator: 1540=x180\frac{15}{40}=\frac{x}{180}.
  2. Multiply both sides by 40×18040\times180 to get 40x=15×180=2,70040x=15\times180=2{,}700.
  3. Divide by 40 to get x=67.5x=67.5 meters.

Check by finding the unit rate: 15/40=0.37515/40=0.375 meter per panel. Then 180×0.375=67.5180\times0.375=67.5 meters. The calculation assumes all panels need the same length of trim.

Identifying Proportional Relationships: Tables, Equations & Graphs

A proportional relationship (also known as direct variation) describes a scenario where two quantities maintain a constant, unvarying ratio to one another. Practice recognizing proportional relationships in tables, equations and coordinate graphs.

1. Data tables

At each row with nonzero xx, calculate y/xy/x. These quotients must agree. For a row with x=0x=0, check y=0y=0 directly because dividing by zero is undefined. If the only row is (0,0)(0,0), it fits any kk and cannot determine the rate by itself.

Hours worked (xx)Gross pay (yy)Check
0$0Zero input, zero output
10$180180/10=18180/10=18
20$360360/20=18360/20=18
35$630630/35=18630/35=18
40$720720/40=18720/40=18

Every row fits y=18xy=18x. A row such as (0,12)(0,12) would contradict that relationship even though it has no quotient to compare.

2. Algebraic Equations

A proportional relationship is expressed algebraically in the direct variation format:

y=kxy = kx

where kk is the constant of proportionality. Crucially, there can be no non-zero constant added or subtracted. Contrast the two equations below:

  • y=22xy = 22x: Proportional. When x=0x = 0, y=0y = 0.
  • y=22x+15y = 22x + 15: Non-Proportional (linear, but not proportional). Even though the rate of change is constant (2222), the initial charge is $15 when x=0x = 0.

3. Coordinate-plane graphs

For real inputs without a restriction, the graph of y=kxy=kx is a straight line through (0,0)(0,0). The slope equals kk. Sometimes the context allows only nonnegative values or only whole numbers. In that case some or all of the graph may be separate points, but they still lie on a line through the origin. A nonvertical line that crosses the vertical axis at (0,5)(0,5) has a nonzero starting value and does not represent direct proportionality.

The Constant of Proportionality (kk)

The constant of proportionality (kk) represents the invariant ratio between two proportional quantities:

k=yx(x≠0)k = \frac{y}{x}\quad (x\ne 0)

In practical application, kk is numerically identical to the unit rate and the slope (mm) of the linear graph. Interpret the points using the variables and units in the problem:

  • The coordinate (0,0)(0, 0) indicates that zero input produces zero output (e.g., working 0 hours yields $0 earnings).
  • If one unit of input is allowed, (1,k)(1, k) represents the unit rate directly (e.g., at 1 hour, the earnings are $18).

Scale Drawings, Blueprint Proportions & Map Scales

A scale drawing or blueprint is an enlarged or reduced proportional depiction of an actual object or physical space. A scale can state how many real units one drawing unit represents. A dimensionless scale factor uses drawing and actual lengths in the same units:

Scale Factor=Drawing MeasurementActual Measurement\text{Scale Factor} = \frac{\text{Drawing Measurement}}{\text{Actual Measurement}}

Solving Blueprint & Map Problems

To determine an actual physical distance from a scale drawing, set up a proportion placing the defined scale on one side and the measured drawing dimension on the other.

Worked Example: Construction Blueprint Floor Plan

Problem: An architectural floor plan utilizes a scale of 14 inch=2 feet\frac{1}{4}\text{ inch} = 2\text{ feet}. On the blueprint, a commercial conference room measures 3.5 inches3.5\text{ inches} wide by 5.25 inches5.25\text{ inches} long. Calculate the actual square footage (area) of the conference room.

  • Step 1: Calculate Actual Width (WW): 0.25 in2 ft=3.5 inW  ⟹  0.25⋅W=2⋅3.5  ⟹  0.25W=7  ⟹  W=70.25=28 feet\frac{0.25\text{ in}}{2\text{ ft}} = \frac{3.5\text{ in}}{W} \implies 0.25 \cdot W = 2 \cdot 3.5 \implies 0.25W = 7 \implies W = \frac{7}{0.25} = 28\text{ feet}
  • Step 2: Calculate Actual Length (LL): 0.25 in2 ft=5.25 inL  ⟹  0.25⋅L=2⋅5.25  ⟹  0.25L=10.5  ⟹  L=10.50.25=42 feet\frac{0.25\text{ in}}{2\text{ ft}} = \frac{5.25\text{ in}}{L} \implies 0.25 \cdot L = 2 \cdot 5.25 \implies 0.25L = 10.5 \implies L = \frac{10.5}{0.25} = 42\text{ feet}
  • Step 3: Calculate Actual Area (A=L×WA = L \times W): Area=42 ft×28 ft=1,176 square feet\text{Area} = 42\text{ ft} \times 28\text{ ft} = 1,176\text{ square feet}
  • Crucial Exam Strategy: The linear factor cannot be applied to a drawing area directly. Area scales by the square of the linear factor ((scale)2(\text{scale})^2). Here each drawing inch represents 8 actual feet, so each square inch represents 64 square feet. The drawing area is 18.375 square inches, and 18.375 × 64 = 1,176 square feet. To redraw the same room at 1/2 inch to 2 feet, double both drawing lengths to 7 inches and 10.5 inches. The actual room stays the same size.
Loading diagram...
Check a proportional relationship
Test Your Knowledge

A workshop mixes 7.5 grams of color powder for every 125 milliliters of base paint. How many grams will it use for 500 milliliters at the same ratio?

A

25.0 grams

B

30.0 grams

C

37.5 grams

D

66.7 grams

Test Your Knowledge

A model gives the following production counts. Which equation fits the data?

Hours operated (x)Parts produced (y)
00
2170
5425
7595
10850
A

y = x + 85

B

y = 0.0118x

C

y = 85x

D

y = 170x

Test Your Knowledge

On a plan, 1/4 inch represents 3 feet. A storage room has a perimeter of 22 inches on the plan. What is the actual perimeter?

A

264 feet

B

176 feet

C

88 feet

D

66 feet

Test Your Knowledge

Which table entry would rule out proportionality even if all nonzero x entries gave the same ratio y/x?

A

x = 2, y = 4 when k = 2

B

x = 0, y = 0

C

x = 3, y = 6 when k = 2

D

x = 0, y = 5

Sections you finish are checked off in the contents.