Free Study Guide•Practice questions, flashcards, and related resources

Free PE Industrial Exam Prep

NCEES PE Industrial and Systems Exam

Prepare for the PE Industrial exam without spending hundreds on expensive prep courses. Free study guides, practice questions, flashcards, and related exam resources.

Same family resources

Explore More PE Exams

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Your Study Path

PE PE Exams: Study Roadmap

Follow this path to organize your exam preparation

1

Systems Models and Decision ToolsYou are here

Rebuild modeling, optimization, queueing, simulation, and bottleneck-analysis fundamentals. Allocate study hours to your diagnostic results; this sequence is editorial guidance and NCEES does not prescribe study hours.

Varies
2

Facilities and Operations Core

Drill layout, material handling, forecasting, inventory, scheduling, logistics, and economics. Allocate study hours to your diagnostic results; this sequence is editorial guidance and NCEES does not prescribe study hours.

Varies
3

Work Design and Human Factors

Strengthen methods analysis, standard times, line balancing, ergonomics, and safety-risk decisions. Allocate study hours to your diagnostic results; this sequence is editorial guidance and NCEES does not prescribe study hours.

Varies
4

Quality, Reliability, and Timed Practice

Finish with SPC, capability, DOE, reliability, maintenance, and long timed mixed-domain sets. Allocate study hours to your diagnostic results; this sequence is editorial guidance and NCEES does not prescribe study hours.

Varies
Estimated total study time
Varies by study plan
Choose a weekly schedule based on your starting point.

Can You Take the PE Industrial Exam?

Check if you meet the basic eligibility requirements

Age
Education
The licensing board determines acceptable education and any alternative eligibility route; consult the board for the jurisdiction where you apply.
Experience
The licensing board determines experience requirements and whether experience is required before the exam or before licensure; the exam itself does not grant a license.
Additional Requirements
  • •State board approval is required before scheduling.
  • •Exam is delivered at Pearson VUE test centers.
  • •Retakes require the next available annual administration and compliance with the licensing board’s attempt or reapplication rules.
  • •Once-yearly administration. The current linked guide, October 2026 cover, page 17, lists 30 September 2027; the owner overview still displays the past 28 October 2026 date. Confirm your own authorization and booking in MyNCEES.

PE Industrial Quick Facts

Timeline

Preparation
Plan backward from your approved annual administration; NCEES does not prescribe study hours.
Next guide listing
30 September 2027, page 17 of the current linked October 2026 Examinee Guide.
Results
Usually 7–10 days after testing; follow board-specific next steps.

Exam Provider

Pearson VUE

In-Person Only
Schedule Your Exam

Retake Policy

PE Industrial and Systems is offered on one day each year. The next guide-listed administration is 30 September 2027; confirm with MyNCEES and your board. NCEES’s general once-per-window/three-in-12-months ceiling does not create extra Industrial administrations, and boards may impose stricter reapplication rules.

Total Cost Breakdown

Exam Fee$400 (NCEES)
Application FeeAny separate board application fee is set by the licensing jurisdiction
Total Estimated Cost$400 plus board-specific application or processing fees
Why Choose Us

Free PE Industrial Prep Tools

Reported exam pass rate: NCEES’s table updated January 2026 lists 69% of 80 first-time and 29% of 21 repeat Industrial and Systems examinees passing. These are dated historical cohorts, not a raw passing score or results of the 28 October 2026 administration.. These figures describe exam candidates, not OpenExamPrep user outcomes. Check the exam sponsor’s website for published statistics.

200 Practice Questions

Local practice-bank inventory: 200 questions across the five NCEES content areas; the real exam has 85 questions.

Targeted Concept Repair

Use explanations to fix weak spots in forecasting, queueing, ergonomics, quality, and reliability.

Current Source Versions

Specification effective October 2020; current linked guide marked October 2026. Dated January 2026 pass rates are not a passing cutscore.

Free PE Industrial Prep

Full practice access without paywalls so you can build exam-day repetition.

Compare:
Kaplan $300+•Achievable $200+•OpenExamPrep $0

What You'll Study

13 chapters covering the exam topics in this guide

PE Industrial Exam Details

NCEES PE Industrial and Systems Exam

Administered by NCEES

Official Source
Not published by NCEES; results are reported pass/fail using a scaled score and passing standard
Passing Score
85
Questions
8.5
Hours
$400 NCEES exam fee (state board fees may also apply)
Exam Fee
Study time: NCEES does not publish an official study-hour requirement
Prerequisites: Licensing-board approval and jurisdiction-specific education, examination, experience, and application requirements
Valid for: Licensing-board rules determine acceptance of exam results and application timing; no PE Industrial-specific national validity interval is published by NCEES

Exam Content Breakdown

Based on the official NCEES content outline

Systems Engineering14–21 questions (published range)

Analysis and design tools, requirements analysis and QFD, performance measures, modeling (simulation, queuing, LP, networks, Markov chains), process types, model assessment, bottleneck analysis, value engineering, and project management (PERT/CPM/CCPM).

Facilities Engineering and Planning14–21 questions (published range)

Process flow, layout design (SLP, relationship diagrams, center of gravity), space and capacity analysis, cost-benefit analysis, site selection, unit loads, facility life cycle cost, and material handling equipment.

Operations Engineering14–21 questions (published range)

Forecasting, production planning (capacity, MRP, JIT, lot sizing, aggregate planning), engineering economics and break-even, costing systems, scheduling, inventory control, distribution models, warehousing, and transportation modes.

Work Design14–21 questions (published range)

Methods analysis and man-machine charts, line balancing, work measurement, learning curves, work sampling, safety codes and DART rates, ergonomic risk factors, human capacity, lifting aids, link analysis, workplace design, and process planning.

Quality Engineering14–21 questions (published range)

Statistical process control, process capability, acceptance sampling, quality systems, DOE, Taguchi, FMEA, reliability, maintenance, and root cause analysis.

What's Included

13 Chapters

Complete exam coverage

Practice Quizzes

With detailed explanations

Free to Start

No credit card required

Ran Chen - AI Engineer, CFP®
CFP®
Why It's Free

Quality Exam Prep Shouldn't Cost Hundreds

I'm Ran Chen, an engineer with 20+ years of coding experience. I passed my Life Insurance license, EA exam, SIE, Series 6, 63, 65, and finally the CFP® exam.

Through all these exams, one thing became clear: exam prep is expensive. But with AI, we can change that. Quality preparation can now be free for everyone.

About Ran Chen

What's Next After the PE Industrial?

After passing the PE Industrial, you can pursue these career paths

PE Industrial Exam FAQ

Official NCEES Resources

Verify information with these official sources

More Free Resources

Loading...
No Credit Card Required

Ready to Start Your Free PE Industrial Prep?

Review the study guide, practice key concepts, and use the free tools at your own pace.