Free Study Guide•Practice questions, flashcards, and related resources

Free ASE T1 Exam Prep

ASE T1 — Gasoline Engines (Medium/Heavy Truck) Certification

Prepare for the ASE T1 exam without spending hundreds on expensive prep courses. Free study guides, practice questions, flashcards, and related exam resources.

Same family resources

Explore More ASE Certifications

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Your Study Path

ASE ASE Certifications: Study Roadmap

Follow this path to organize your exam preparation

1

Master General Engine DiagnosisYou are here

Focus on the largest area (28%): complaint verification, compression, leak-down, running compression, vacuum testing, smoke and noise diagnosis, and starting/charging electrical tests.

16
hours
2

Build Computerized Controls and Emissions

Practice OBD-II monitors and drive cycles, sensor and 5V reference testing, fuel trims, DTC strategy, PCV, EGR, AIR, EVAP, and catalyst efficiency diagnosis (26% combined).

12
hours
3

Add Ignition, Fuel, Air, and Exhaust

Drill primary/secondary ignition, scope waveforms, CKP/CMP sensors, fuel pressure and volume testing, electronic throttle control (TAC), vacuum leaks, exhaust backpressure, and LPG systems (24% combined).

12
hours
4

Finish Head, Valvetrain, Block, Lube and Cooling

Review cylinder head warpage and valve service, bore and bearing metrology, Plastigauge, camshaft/timing drive, oil pump clearance, cooling pressure tests, and fan clutches (22% combined).

8
hours
Estimated total study time
48 hours
That's about 5 weeks at 10 hours/week

Can You Take the ASE T1 Exam?

Check if you meet the basic eligibility requirements

Age
Education
No formal education requirement; relevant hands-on work experience is the primary qualifier
Experience
Two-year Repair Technician requirement, satisfied by relevant experience and ASE-approved program-specific training credits.
Additional Requirements
  • •ASE evaluates the two-year Repair Technician requirement and approved training credits; accredited OEM-sponsored co-op completion can receive two years, while other listed training alternatives generally receive one year or less.
  • •Each ASE T-series test, including T1, is registered for and taken individually
  • •T1 is not required to earn the Master Medium/Heavy Truck Technician credential (which requires T2 through T8)
  • •Certifications are valid for five years; the T1R recertification test has 25 scored questions in 30 minutes

ASE T1 Quick Facts

Time to Get Licensed

4-8 weeks as a planning estimate; actual time depends on experience and weak areas

From start to license in hand

Exam Provider

Prometric

In-Person Only
Schedule Your Exam

Retake Policy

After either a Pass or Fail result, wait 30 full days before purchasing and scheduling the same ASE test. Purchased tests must be scheduled and taken within 90 days.

Total Cost Breakdown

Exam Fee$62 test fee plus $34 registration fee per order ($96 total for a single test)
Total Estimated Cost$96 for a single test (plus applicable state sales tax and any optional study materials)
Why Choose Us

Free ASE T1 Prep Tools

Reported exam pass rate: Not publicly reported by ASE. These figures describe exam candidates, not OpenExamPrep user outcomes. Check the exam sponsor’s website for published statistics.

100 Practice Questions

Covers all eight official ASE T1 content areas with detailed answer rationales.

Current 2026 Blueprint

Built to the 50-scored / 60-total, 75-minute ASE T1 structure with the official 28/8/8/6/12/12/10/16 weighting.

Free Prep

Use the full bank with no paywall while targeting weak diagnostic areas before the Prometric test.

Compare:
Kaplan $300+•Achievable $200+•OpenExamPrep $0

What You'll Study

11 chapters covering the exam topics in this guide

ASE T1 Exam Details

ASE T1 — Gasoline Engines (Medium/Heavy Truck) Certification

Administered by ASE (National Institute for Automotive Service Excellence)

Official Source
Fixed passing percentage not publicly published by ASE
Passing Score
60
Questions
75
Minutes
$62 test fee + $34 registration fee per order ($96 total for one test)
Exam Fee
Study time: 4-8 weeks
Prerequisites: 2-year Repair Technician requirement; approved training credit varies by category; T1 not required for Master Truck

Exam Content Breakdown

Based on the official ASE (National Institute for Automotive Service Excellence) content outline

General Engine Diagnosis14 questions (28%)

Customer concern verification, compression, cylinder leakage, running compression, vacuum testing, exhaust smoke and noise diagnosis, oil consumption, no-start, and starting/charging electrical diagnosis on medium/heavy-duty truck gasoline engines.

Cylinder Head & Valve Train Diagnosis & Repair4 questions (8%)

Burned and leaking valves, valve guide and seal wear, head warpage and surface finish, hydraulic lifters, rocker arms, pushrods, valve springs, and overhead camshaft service.

Engine Block Diagnosis & Repair4 questions (8%)

Cylinder bore measurement and honing, in-block camshaft and timing drive service, bearing wear and clearance with Plastigauge, crankshaft endplay, select-fit bearings, piston ring end gap, vibration damper, and flywheel/flexplate runout.

Lubrication & Cooling Systems Diagnosis & Repair3 questions (6%)

Oil pressure testing, oil pump clearance and relief valves, oil cooler testing, thermostat operation, cooling-system pressure testing, coolant service, water pump, radiator, fan clutch operation, and warning indicators.

Ignition System Diagnosis & Repair6 questions (12%)

Primary and secondary ignition circuit diagnosis, coil testing, spark plug reading and wear, secondary ignition scope analysis, misfire and ignition DTC diagnosis, CKP/CMP sensors, spark knock, and ICM/PCM control.

Fuel, Air Induction & Exhaust Systems Diagnosis & Repair6 questions (12%)

Fuel pressure and volume testing, fuel pump control circuits, fuel trim and DTC analysis, vacuum leaks, air filtration restriction, exhaust backpressure, injector balance, gasoline direct-injection service, and electronic throttle control (TAC).

Emissions Control Systems Diagnosis & Repair5 questions (10%)

PCV, EGR, secondary air injection (AIR), catalytic converter efficiency, EVAP leak and purge/vent control diagnosis, scan data interpretation, and five-gas exhaust analysis.

Computerized Engine Controls Diagnosis & Repair8 questions (16%)

OBD-II monitors, enable criteria, freeze frame, and drive cycles; sensor, actuator, and 5V reference testing with scan tool, DMM, and DSO; diagnosis with and without DTCs; PCM power/grounds, J2534 reprogramming, and interrelated systems.

What's Included

11 Chapters

Complete exam coverage

Practice Quizzes

With detailed explanations

Free to Start

No credit card required

Ran Chen - AI Engineer, CFP®
CFP®
Why It's Free

Quality Exam Prep Shouldn't Cost Hundreds

I'm Ran Chen, an engineer with 20+ years of coding experience. I passed my Life Insurance license, EA exam, SIE, Series 6, 63, 65, and finally the CFP® exam.

Through all these exams, one thing became clear: exam prep is expensive. But with AI, we can change that. Quality preparation can now be free for everyone.

About Ran Chen

ASE T1 Exam FAQ

Official ASE (National Institute for Automotive Service Excellence) Resources

Verify information with these official sources

More Free Resources

Loading...
No Credit Card Required

Ready to Start Your Free ASE T1 Prep?

Review the study guide, practice key concepts, and use the free tools at your own pace.