According to the ASE L3 reference, which voltage boundary separates low voltage from high voltage?
Ase L3 Hv Battery System
Question · Easy
What voltage does the ASE L3 Certification Test Reference call high voltage?
Battery System
Flashcard
A manufacturer specifies insulating gloves with a minimum 1,000 V AC rating for a high-voltage service task. What is the lowest listed class that meets that requirement?
Plug that, when pulled, isolates the high-voltage battery from the rest of the high-voltage components and harness.
Battery system
Guess the Term
Chapter 1: High-Voltage Safety, PPE & Isolation Verification
1.1 High-Voltage Safety Standards, PPE Ratings & Workshop Safety
Study guide
Cheat sheet
What determines the PPE worn in addition to voltage-rated gloves when servicing an exposed high-voltage circuit?
Question · Medium
Read the clue and guess the term in 6 tries.
Game
What establishes the correct PPE and electrical test equipment for HV work?
How should a technician treat an exposed high-voltage circuit before absence of voltage has been verified?
Interconnected modules arranged for one particular energy-storage use.
Before the day's use, how should rubber insulating gloves be inspected under OSHA's electrical protective equipment rule?
What routine inspection and periodic testing apply to insulating gloves under OSHA?
Before isolating a push-button-start hybrid's high-voltage system, what action helps prevent unintended startup?
Self-contained unit that sends electrical energy to an external circuit through a chemical reaction inside it.
1.2 High-Voltage De-Energizing, Lockout/Tagout & Three-Point Voltage Verification
Once a vehicle's manual service disconnect has been removed, how does a technician determine when the downstream high-voltage circuit can be serviced?
Swap tiles to line up three of the same term.
Term Match
Does removing a high-voltage service disconnect make the battery internally safe to touch?
What instrument is appropriate for verifying absence of voltage on a vehicle's high-voltage circuit?
Grouping of connected cells in one mechanical and electrical unit.
What can a crash-triggered shutdown do on an electrified vehicle?
Why must battery DTCs be checked against harness and fuse condition?
What is the proper approach to re-enabling a high-voltage system after service?
Gloves, safety glasses and similar worn gear that reduce contact with workplace hazards.
1.3 Isolation Resistance Testing, Megohmmeter Procedures & Loss of Isolation Faults
A hybrid vehicle has a DTC P0A80 (Replace Hybrid Battery Pack). What does this code typically indicate?
Flip two cards at a time to find matching terms.
Term Pairs
What must be verified when removing or installing a traction battery pack?
Two adjacent battery blocks are at the same temperature. Under load, one drops substantially farther than the others. Which condition should be investigated?
Unit in which fuel and air are combined and lit by a spark plug.
Engine systems
A hybrid logs P0A7A for generator inverter performance. Which part of the inverter assembly should the diagnostic procedure focus on?
A battery block reads low on scan data. What should be checked before condemning the cells?
A hybrid stores a DC/DC converter status-circuit fault. Which function can be affected if the converter stops operating?
Car with no fuel-burning engine that runs on a large rechargeable pack and one or more motor-generators.
Drive systems
Chapter 2: High-Voltage Battery Systems, BMS & Thermal Management
2.1 Battery Chemistries, Cell Architecture & Module Construction
On a hybrid with a Battery Energy Control Module, which input does that module use to monitor traction battery condition?
Find five hidden terms in a grid of letters.
Term Search
How does state of charge differ from state of health?
What does battery state of charge in freeze-frame data help a technician establish?
Question · Hard
Auxiliary e-machine in the Type-5 layout that can both propel the car and recover braking energy.
The OEM diagnostic routine reports a battery sensor module communication fault. Its low-voltage supply and ground are within specification. What should be checked next?
Why can a battery controller restrict charging in extreme temperatures?
In the ASE L3 reference, how is nominal high-voltage pack voltage specified across the six vehicle types?
Gearbox option for the ASE Type-2 hybrid that carries power through a split pulley and steel belt.
Loading more…