Analyze the Incident
Not publishedof exam
Plan the Response
Not publishedof exam
Implement and Evaluate the Response
Not publishedof exam
Emergency Decontamination
Not publishedof exam
Mission-Specific Qualifications
Not publishedof exam
Quick Facts
- Standard
- NFPA 470, 2022 edition
- Operations core
- Chapter 7 professional qualifications
- Pro Board prerequisite
- Chapter 5 Awareness
- Mission-specific qualifications
- Chapter 9, check agency requirements
- Written and skills testing
- Details vary by certifying agency
- HAZWOPER Operations
- Eight hours minimum or qualifying experience
- HAZWOPER ongoing competency
- Annual refresher or competency demonstration
- Transport response guide
- 2024 Emergency Response Guidebook
ERG Color Recall
Yellow numbers, blue names, orange actions, green distances.
Isolation vs Protective Action
Initial isolation
- All directions from release
- Keep unauthorized people out
Protective action distance
- Extends downwind
- Consider evacuation or sheltering
Isolation surrounds, protective action extends downwind
ERG Lookup Decisions
- Multiple hazardous materials involved→Call emergency response contact(Use ERG inside back cover)
- Explosive division placard visible→Use division-specific orange guide(ERG front flowchart)
- Four-digit UN/NA ID known→Yellow index(Find three-digit guide)
- Only shipping name known→Blue index(Find guide and ID)
- Only transport placard visible→White placard table(Prefer confirmed product when available)
- Only railcar or trailer identifiable→White container chart(Last resort, confirm cargo)
- No reliable identification clues→Guide 111 initially
- Green highlight, no fire→Use applicable Table 1 entry(Also consult orange guide)
- Green highlight with fire→Orange guide for fire evacuation(Table 1 for residual release)
- Table 1 points to Table 3→Use Table 3 spill distances(Match container, wind, day/night)
- Table 1 specifies water contact→Check whether material entered water(Table 2 names gases produced)
Size-Up Clues
- Approach
- Upwind, uphill, and/or upstream
- Scene survey
- Container, product, release, surroundings
- Shipping papers
- Transport identity and emergency contact
- Safety data sheet
- Product hazards and protective measures
- NFPA 704 diamond
- Fixed-site emergency hazard ratings
- Blue, red, yellow, white
- Health, flammability, instability, special hazards
- NFPA 704 scale
- Zero lowest, four highest
- Vapor density
- Gas or vapor density versus air
- Specific gravity
- Liquid density relative to water
- Flash point
- Lowest temperature producing ignitable vapor
- BLEVE
- Boiling liquid expanding vapor explosion
- Exposure routes
- Inhalation, absorption, ingestion, injection
- Container profile
- Clue to contents and pressure
- Railcar cargo
- Verify using consist or railroad
- Suspicious scene
- Consider secondary devices
DOT Hazard Classes
- Class 1
- Explosives
- Class 2
- Gases
- Class 3
- Flammable and combustible liquids
- Class 4
- Flammable solids, spontaneous combustion, water-reactives
- Class 5
- Oxidizers and organic peroxides
- Class 6
- Toxic materials and infectious substances
- Class 7
- Radioactive materials
- Class 8
- Corrosive materials
- Class 9
- Miscellaneous hazardous materials
ERG Color Key
- White front pages
- Lookup flowchart, placards, container charts
- Yellow index
- Look up four-digit UN/NA ID
- Blue index
- Look up material by name
- Orange guides
- Hazards, public safety, response actions
- Green Table 1
- Isolation and protective action distances
- Green Table 2
- Toxic gases from water contact
- Green Table 3
- Large-spill distances for six gases
- Table 3 inputs
- Container type, wind speed, day/night
- P after guide number
- Potential for violent polymerization
- UN 1203 gasoline
- Orange Guide 128
- UN 1017 chlorine
- Guide 124, green tables apply
Operations vs Technician
Operations
- Defend from safe distance
- Limit spread and exposures
Technician
- Approach release point when assigned
- Plug, patch, or stop release
A source repair needs Technician capability
Response Decisions
- Release suspected on arrival→Stage upwind at safe distance(Isolate and notify command)
- Public can leave safely→Consider evacuation(Use command-approved routes)
- Movement would increase exposure→Consider shelter-in-place(Assess building protection)
- Response exceeds training or equipment→Isolate and request qualified resources
- Direct leak plugging needed→Request Hazmat Technician team
- Actual or potential inhalation hazard→Positive-pressure SCBA for exposed responders(Command clears downgrade using monitoring)
- Hazard expands or wind shifts→Report and reassess boundaries(Withdraw if unsafe)
Qualification Map
- NFPA 470 Chapter 5
- Awareness professional qualifications
- NFPA 470 Chapter 6
- Operations response competencies
- NFPA 470 Chapter 7
- Operations professional qualifications
- NFPA 470 Chapter 9
- Operations mission-specific professional qualifications
- NFPA 470 Chapter 11
- Technician professional qualifications
- Awareness under HAZWOPER
- Recognize and notify appropriate authorities
- Operations under HAZWOPER
- Limit spread from safe distance
- Employer certification
- Required for HAZWOPER Operations competency
- NFPA 470 consolidation
- Combines 472, 473, and 1072
Protective Actions
- Isolate and deny entry
- Keep unauthorized people away
- Evacuation
- Move people along safe routes
- Shelter-in-place
- Protect people inside suitable buildings
- Sheltering controls
- Close openings, stop outside ventilation
- Action selection
- Weigh plume, routes, buildings, time
- Defensive limits
- Match training, PPE, and resources
- Nonintervention
- Avoid direct intervention and isolate
Core Response Cycle
Analyze, plan, act, decon, evaluate.
Hot Zone vs Warm Zone
Hot zone
- Exclusion area around the hazard
- Controlled access for assigned work
Warm zone
- Contamination reduction area
- Decon and hot-zone support
Locate clean support in cold zone
Command and Control Zones
- ICS
- Incident Command System
- Incident Commander
- Directs response and approves tactics
- Incident action plan
- Objectives, assignments, safety controls
- Safety official
- May suspend imminently dangerous activities
- Hot zone
- Restricted area of greatest hazard
- Warm zone
- Decon and hot-zone support
- Cold zone
- Command, staging, clean support
- Buddy system
- At least two in hazardous areas
- Backup personnel
- Equipped and ready for rescue
- Exposure controls
- Limit personnel in hazard areas
Report and Reassess
- Progress report
- Task status, effectiveness, changing hazards
- Actual versus predicted
- Compare release and container behavior
- Changing wind or release
- Reassess zones and protective actions
- Unsafe conditions
- Withdraw and notify command
- Possible evidence
- Preserve, document, and report
- Closeout
- Document actions, exposures, and findings
- Post-incident critique
- Review response and follow-up actions
Decon Flow
Keep the decon route moving from dirty toward clean.
Emergency vs Technical Decon
Emergency decon
- Rapid initial contamination reduction
- Chapter 7 core performance skill
Technical decon
- Planned sequence with designated stations
- Chapter 9.4 specialized qualification
Urgency drives emergency decon
Decon Decisions
- Immediate contamination threatens health→Initiate emergency decon(Follow hazard-specific protocols)
- Many contaminated patients→Request mass decon capability(Plan assisted and walking lanes)
- Water compatibility is uncertain→Check material-specific guidance(Select compatible decon method)
- Detailed responder decon needed→Use assigned technical decon team
- Contamination remains after decon→Reassess method and repeat appropriately
- Clothing or equipment is contaminated→Segregate and manage as contaminated
Decon Priorities
- Emergency decon
- Urgent contamination reduction
- Gross decon
- Removes bulk contamination
- Technical decon
- Systematic contaminant removal
- Mass decon
- Processes many contaminated people
- Decon corridor
- Controlled dirty-to-clean route
- Cross-contamination
- Transfer to clean people or equipment
- Disrobe
- Separate and bag contaminated clothing
- Runoff control
- Limit spread of contaminated water
- Decon check
- Assess effectiveness using appropriate methods
Radiation Protection
Less time, more distance, appropriate shielding.
Level A vs Level B
Level A
- Highest skin and respiratory protection
- Totally encapsulating chemical-protective suit
Level B
- Highest respiratory protection
- Less skin protection than Level A
Select for skin and inhalation hazards
Product Control Decisions
- Task exceeds mission-specific assignment→Refer task to command
- Remote shutoff fits approved assignment→Operate from safe position(Chapter 9.6 product control)
- Surface spill needs perimeter barrier→Consider diking(Within approved defensive assignment)
- Flow threatens a drain→Consider diversion or retention(Protect downstream exposures)
- Insoluble product floats in water→Consider an underflow dam(Assess flow and site limits)
- Insoluble product sinks in water→Consider an overflow dam(Assess flow and site limits)
- Pool releases hazardous vapor→Evaluate compatible vapor-suppressing foam(Check product and runoff)
- Water-reactive material suspected→Check product-specific guidance before applying water
Chapter 9 Map
- AHJ assignment
- Authority having jurisdiction designates duties
- 9.2
- Personal protective equipment
- 9.3
- Mass decontamination
- 9.4
- Technical decontamination
- 9.5
- Evidence preservation, public safety sampling
- 9.6
- Product control
- 9.7
- Detection, monitoring, and sampling
- 9.8
- Victim rescue and recovery
- 9.9
- Illicit laboratory incidents
- 9.10
- Radiological hazards
- Pro Board 9.3–9.10 prerequisites
- Chapters 5, 7, plus 9.2
Suppression vs Dispersion
Vapor suppression
- Reduces vapor generation at pool
- Requires compatible agent
Vapor dispersion
- Reduces local airborne concentration
- Account for shifted vapor path
Check exposures before selecting tactics
Protection Levels
- Level A
- Highest respiratory and skin protection
- Level B
- Highest respiratory, lower skin protection
- Level C
- Chemical clothing and air-purifying respirator
- Level D
- Work uniform, minimal protection
- SCBA
- Self-contained breathing apparatus
- IDLH
- Immediate life or health danger
- Donning
- Inspect PPE before putting on
- Tight-fitting respirator
- Seal check each time donned
- APR suitability
- Known concentrations, adequate oxygen, non-IDLH
- Cartridge or canister
- Match known contaminant and concentration
- Structural gear
- Thermal protection, limited chemical protection
- Permeation
- Molecular passage through intact material
- Penetration
- Leakage through seams or openings
- Degradation
- Chemical damage to protective material
- NFPA 1990
- Hazmat protective ensemble standard
Bump Test vs Calibration
Bump test
- Functional check with test gas
- Confirms alarms and sensor response
Full calibration
- Adjusts readings against known concentration
- Needed after failed functional check
Remove instrument if calibration fails
Product Control Methods
- Confinement
- Limit spread after release
- Damming
- Barrier across a waterway
- Diking
- Berm limits surface spill spread
- Diversion
- Redirect flow away from exposures
- Retention
- Hold spill in designated area
- Underflow dam
- Water passes beneath floating product
- Overflow dam
- Water passes above sunken product
- Absorption
- Product enters sorbent material
- Adsorption
- Product adheres to sorbent surface
- Vapor suppression
- Compatible foam reduces vapor release
- Vapor dispersion
- Disperse vapor to reduce concentration
- Remote shutoff
- Authorized operation from safe position
- Dilution
- Reduce concentration using compatible diluent
Air Monitoring
- Oxygen channel
- O₂ by volume, percent
- O₂ below 19.5%
- Oxygen-deficient atmosphere
- Combustible channel
- Percent of lower explosive limit
- CO and H₂S channels
- Carbon monoxide, hydrogen sulfide, ppm
- Catalytic LEL sensor
- Low oxygen can distort readings
- PID
- Photoionization detector screens ionizable vapors
- Detector tube
- Targeted gas or vapor measurement
- Bump test
- Verifies sensor and alarm response
- Calibration
- Adjust readings against known gas
- pH paper
- Screens liquid acidity or alkalinity
- Pancake survey probe
- Screens for external radioactive contamination
Common Traps
Read the Right Number
Four-digit material ID ≠ Three-digit orange guide
Placard Identification
DOT transport hazard class ≠ NFPA 704 severity rating
Protection Follows the Hazard
Operations qualification ≠ Automatic permission for Level C
Clothing Selection
Structural turnout gear ≠ Chemical vapor-protective suit
Meter Units
Percent of lower explosive limit ≠ Percent gas by volume
Sensor Coverage
Zero on four-gas monitor ≠ All hazards ruled out
Radiological Hazard
Radiation exposure ≠ Radioactive material on or inside
Test Scope
Chapter 7 Operations core ≠ Every Chapter 9 qualification
Last Minute
- 1.Size up from a safe distance
- 2.ERG yellow IDs, blue names
- 3.Check ERG green highlights and fire
- 4.Isolate around the entire release
- 5.Confine spread from a safe distance
- 6.Route routine decon through warm zone
- 7.Read oxygen before catalytic LEL
- 8.Report conditions and task progress
- 9.Verify agency mission-specific testing requirements
Explore More Firefighter Certifications
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
More From This Family
Videos and articles for deeper review.