200+ Free Meraki Solutions Specialist Practice Questions

Pass your Cisco Meraki Solutions Specialist (500-220 ECMS) exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

Not published Pass Rate

200+ Questions

100% Free

1 / 200

Question 1

Score: 0/0

Which statement best describes the Cisco Meraki management model?

Each device keeps a full local controller database and synchronizes only at night

The Dashboard is a cloud-based management plane while data forwarding stays local on the devices

All client traffic must tunnel through the Meraki cloud before reaching the internet

Meraki devices cannot operate unless an on-premises management server is installed

to track

2026 Statistics

Key Facts: Meraki Solutions Specialist Exam

500-220

Exam Code

Cisco

90 min

Exam Time

Cisco

$300

Exam Fee

Cisco

Official Domains

Cisco

3 years

Certification Validity

Cisco

15/30/25/30

Domain Weighting

Cisco

As of March 11, 2026, Cisco's public exam materials still list 500-220 ECMS as the active Meraki specialist exam with a 90-minute limit, $300 fee, and four weighted domains: Designing 15%, Implementing 30%, Operating 25%, and Troubleshooting 30%. Cisco does not publicly post a fixed passing score or a fixed question count. No Meraki-specific 2026 retirement or blueprint revision notice was found on Cisco's current exam pages.

Sample Meraki Solutions Specialist Practice Questions

Try these sample questions to test your Meraki Solutions Specialist exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 200+ question experience with AI tutoring.

1Which statement best describes the Cisco Meraki management model?

A.Each device keeps a full local controller database and synchronizes only at night

B.The Dashboard is a cloud-based management plane while data forwarding stays local on the devices

C.All client traffic must tunnel through the Meraki cloud before reaching the internet

D.Meraki devices cannot operate unless an on-premises management server is installed

Explanation: Meraki uses a cloud-managed architecture: administrators configure and monitor devices from Dashboard, but user traffic is forwarded locally by the appliances, switches, and access points. That is why an outage in cloud connectivity affects management visibility before it affects every data flow.

2A company wants one renewal date for all Meraki licenses in an organization. Which licensing model fits that goal?

A.Per-device licensing

B.Co-termination

C.Bring-your-own-license

D.Subscription pooling by network tag

Explanation: Co-termination aligns the licenses in an organization to a single expiration date. Per-device licensing tracks each license separately, so it does not provide one shared renewal date.

3An enterprise wants different regional IT teams to manage their own sites while a central team retains global visibility. What Meraki design choice is most appropriate?

A.Put every site in a single network with full admin rights for all teams

B.Create separate organizations so all regions are isolated from headquarters

C.Use multiple networks inside one organization with scoped administrator permissions

D.Use one template for everything and avoid any network-level admins

Explanation: Multiple networks inside one organization let the central team keep visibility while delegating rights at the organization or network scope. Creating completely separate organizations would reduce centralized reporting and inventory control.

4Which design requirement is specific to MX warm spare high availability?

A.The spare must use a different appliance model than the primary

B.The pair must participate in Meraki switch stacking

C.Both MX appliances need connectivity to the same upstream and downstream networks

D.Warm spare works only when both appliances are in separate Dashboard organizations

Explanation: MX warm spare relies on VRRP-style failover between appliances that share the same upstream and downstream connectivity. Mixing unrelated uplinks or downstream paths breaks the expected failover design.

5When would a vMX design be more appropriate than deploying a physical MX appliance?

A.When the branch has no need for Auto VPN

B.When the security edge must run inside a public cloud VPC or VNet

C.When the site requires PoE switch ports

D.When the location needs built-in MV camera storage

Explanation: A vMX is the virtual Meraki security appliance used in public cloud environments such as AWS or Azure. It extends Meraki SD-WAN and Auto VPN into cloud workloads without requiring a physical appliance in the cloud provider.

6A design includes two WAN uplinks on an MX and business-critical SaaS traffic should prefer the path with lower latency and loss. Which feature should be planned?

A.STP root guard

B.Dynamic path selection

C.Port mirroring

D.Air Marshal containment

Explanation: Dynamic path selection allows SD-WAN policies to steer selected application traffic based on measured performance such as latency, jitter, and loss. STP and Air Marshal solve different problems entirely.

7Which Meraki design choice best supports consistent configuration across dozens of similar branch sites?

A.Managing every network manually with full local overrides

B.Using configuration templates and binding branch networks to the template

C.Creating a separate Dashboard organization for each new branch

D.Disabling tags to avoid filtering devices

Explanation: Configuration templates provide a scalable way to standardize SSIDs, switch settings, VLANs, and other recurring policies across branch networks. They reduce drift and make large rollouts easier to maintain.

8A guest SSID should provide simple internet-only access without extending guest devices directly onto the production LAN. Which wireless design is the best fit?

A.Bridge mode to the corporate VLAN

B.Layer 3 roaming with a corporate subnet

C.NAT mode with Meraki DHCP

D.Identity PSK without a firewall policy

Explanation: NAT mode with Meraki DHCP isolates guest clients behind the AP and keeps them off the internal LAN. Bridge mode places the client directly onto the upstream VLAN, which is not the goal in this scenario.

9A new MX is on-site and has internet connectivity, but it has not downloaded its Dashboard configuration yet. Which interface is most useful for the initial local setup?

A.Meraki Insight

B.The local status page

C.The Organization > Summary report page

D.The Camera video wall

Explanation: The local status page is intended for direct local access to basic appliance settings and connectivity checks before or during cloud onboarding. Meraki Insight and reports depend on normal Dashboard communication and are not the first tool here.

10Which setting determines whether an MS switch port carries traffic for multiple VLANs?

A.Access policy type

B.Port schedule

C.Trunk mode with allowed VLANs

D.Storm control threshold

Explanation: A trunk port carries multiple VLANs and can restrict them with an allowed VLAN list. An access port carries a single data VLAN instead of multiple tagged VLANs.

About the Meraki Solutions Specialist Exam

Cisco's Meraki specialist exam validates cloud-managed networking skills across solution design, implementation, operations, and troubleshooting. The blueprint centers on Meraki Dashboard workflows plus practical use of MX security appliances, MS switches, MR wireless, Systems Manager, MV smart cameras, and MT sensors.

Assessment

Cisco does not publish a fixed question count on the public 500-220 page; current prep providers commonly describe roughly 55-65 questions.

Time Limit

90 minutes

Passing Score

Cisco does not publish a fixed passing score

Exam Fee

$300 (Cisco / Pearson VUE)

Meraki Solutions Specialist Exam Content Outline

15%

Designing Meraki Solutions

Cloud architecture, organization and licensing models, HA and WAN design, wireless planning, and scalable Dashboard management choices.

30%

Implementing Meraki Solutions

Dashboard administration and deployment tasks for MX, MS, MR, Systems Manager, MV, MT, routing, SD-WAN, security, and policy configuration.

25%

Operating Meraki Solutions

Ongoing operations with monitoring, alerting, firmware management, templates, reports, client analytics, and day-two administration.

30%

Troubleshooting Meraki Solutions

Troubleshooting client, switching, wireless, VPN, security, and device-health issues using event logs, packet capture, RF data, and escalation best practices.

How to Pass the Meraki Solutions Specialist Exam

What You Need to Know

Passing score: Cisco does not publish a fixed passing score
Assessment: Cisco does not publish a fixed question count on the public 500-220 page; current prep providers commonly describe roughly 55-65 questions.
Time limit: 90 minutes
Exam fee: $300

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

Meraki Solutions Specialist Study Tips from Top Performers

1Spend most of your study time on implementation and troubleshooting because together they account for 60% of the official blueprint.

2Practice real Dashboard workflows for networks, templates, tags, firmware windows, alerts, and packet capture instead of relying only on flash cards.

3Know the purpose and common deployment patterns for MX, MS, MR, Systems Manager, MV, and MT so product-selection questions feel obvious.

4Be comfortable tracing client issues through the event log, RF data, switch port details, VPN status, and uplink health in the Dashboard.

5Review licensing, organization design, and HA tradeoffs because design questions often test judgment rather than raw memorization.

6Use the Meraki API and template concepts at a practical level, especially for scale, consistency, and repetitive operations.

Frequently Asked Questions

How many questions are on the Cisco Meraki Solutions Specialist exam?

Cisco's current public 500-220 ECMS exam page does not publish a fixed question count. Most current prep providers describe the exam as roughly 55-65 questions, so a 60-question planning assumption is reasonable, but that number is an inference rather than an official Cisco guarantee.

What is the passing score for 500-220 ECMS?

Cisco does not publish a fixed passing score for the Meraki specialist exam. Cisco reports written-exam results as pass or fail and publishes the detailed score report within the normal Cisco certification workflow rather than posting a public cut score in advance.

Which domains matter most for Meraki Solutions Specialist prep?

Implementation and Troubleshooting matter most because they are each weighted at 30%, for a combined 60% of the blueprint. Operating Meraki Solutions is also substantial at 25%, so hands-on Dashboard workflows matter far more than memorizing isolated facts.

What products should I prioritize while studying?

Start with Meraki Dashboard fundamentals and the core network product lines: MX, MS, and MR. Then add Systems Manager, MV smart cameras, MT sensors, templates, alerting, packet capture, Auto VPN, SD-WAN, and common support workflows because those topics appear across implementation, operations, and troubleshooting.

Were there any Meraki-specific 2026 exam changes?

No Meraki-specific 2026 retirement notice, pricing change, or revised public blueprint was found on Cisco's current Meraki specialist pages as of March 11, 2026. The active public outline remains the four-domain 500-220 ECMS v1.0 structure with the same 15/30/25/30 weighting.

Can I take 500-220 online, and what is Cisco's retake policy?

Cisco written exams are delivered through Pearson VUE, and Cisco also maintains an online-proctored testing option where available. If you fail a Cisco written exam, Cisco's written-exam policy requires a 5-calendar-day wait before retaking the same exam, and the full exam fee applies again.