Free ASCP PBT Exam Flashcards
Memorize 50 essential terms and definitions for the ASCP Phlebotomy Technician (PBT). See the term, recall the definition, then flip to check yourself.
How does the direction of blood flow distinguish an artery from a vein?
Arteries carry blood away from the heart, and veins return it. The pulmonary artery carries oxygen-poor blood to the lungs, so oxygen content alone cannot identify a vessel.
Filter by Topic
Jump to Card
About These ASCP PBT Flashcards
These 50 flashcards are designed to help you memorize key terms and definitions for the ASCP Phlebotomy Technician (PBT). Each card shows a term on the front and its definition on the back—the classic flashcard format for vocabulary memorization. Use these alongside our practice questions to build both recall and comprehension.
Topics Covered
Complete Flashcard Reference
Review every term in this set. Open any term to reveal its definition.
How does the direction of blood flow distinguish an artery from a vein?
Arteries carry blood away from the heart, and veins return it. The pulmonary artery carries oxygen-poor blood to the lungs, so oxygen content alone cannot identify a vessel.
What is the main job of capillaries?
Their thin walls allow oxygen and nutrients to pass from blood to tissues and allow carbon dioxide and other wastes to enter the blood.
Which liquid blood component retains fibrinogen, plasma or serum?
Plasma retains fibrinogen. To obtain plasma, centrifuge anticoagulated blood. Serum is separated after blood clots, which converts fibrinogen into fibrin.
Which part of a red blood cell carries oxygen?
Hemoglobin binds oxygen in the lungs and carries it in red blood cells to tissues.
The electronic order and printed requisition list different tests. What should you do first?
Pause collection and resolve the discrepancy with the ordering team through the facility’s process. The confirmed test determines the tube, preparation, and collection timing.
How do you verify an alert patient’s identity before a draw?
Ask the patient to state two approved identifiers, such as full name and date of birth. Match both to the order and identification band when present.
A patient ate before a test ordered as fasting. What should you do?
Verify the test’s preparation instructions and document that the patient ate. Check with the laboratory or ordering team before drawing to determine whether to proceed or reschedule.
A patient declines a routine blood draw after you explain it. How do you respond?
Honor the refusal, record it according to facility policy, and notify the ordering or care team so they can decide how to proceed.
Which antecubital vein is usually the first choice if suitable?
The median cubital vein in the center of the antecubital area. When it is easy to locate and palpate, it is usually a good first choice.
Where should you look first for a draw site if an IV is infusing in one arm?
Use a suitable vein in the opposite arm to reduce the risk of dilution or contamination by IV fluid. If that arm is unavailable, coordinate with the care team and follow the facility’s IV-arm protocol.
How should you position someone with a history of fainting during blood draws?
Use a reclining or lying position before collection to reduce the risk of a fall. Ask about prior fainting before beginning the draw.
When is an antiseptic-prepared venipuncture site ready for puncture?
After the required contact time and once it has air-dried. If the prepared site is touched again, repeat site preparation per protocol.
Where do you place your anchoring thumb before inserting a venipuncture needle?
Place it below the puncture site and draw the skin taut. This stabilizes the vein and reduces rolling.
When should you release the tourniquet relative to withdrawing the venipuncture needle?
Release it before withdrawing the needle. Prompt release once flow is established also limits blood stasis.
A patient starts to faint while the needle is in place. What is the immediate response?
Stop the draw, release the tourniquet, disengage the tube, withdraw the needle safely, and apply pressure. Keep the patient from falling and call for help.
Why should a patient avoid repeatedly pumping their fist during a draw?
Repeated muscle contraction can release potassium locally and falsely raise the measured result.
What do you disinfect on an adult blood culture bottle before filling it?
Disinfect the rubber septum with 70% isopropyl alcohol per the collection protocol. This helps keep contaminants out of the culture.
What is the standard CLSI venous order of draw for common tube types?
Blood cultures → sodium citrate → serum → heparin → EDTA → glycolysis inhibitor. The sequence limits additive carryover. Check the laboratory’s instructions for specialty tubes.
Why must a sodium citrate coagulation tube reach its designated fill volume?
Underfilling leaves excess citrate relative to the blood. That imbalance can falsely prolong clotting times such as PT or aPTT.
Why use a discard tube when citrate is the first specimen tube on a winged set?
The discard tube primes the tubing so trapped air does not use up part of the citrate tube’s vacuum. This helps the citrate specimen reach its required fill volume.
Which specimen does a routine complete blood count (CBC) use?
EDTA whole blood, commonly in a lavender-top tube. The anticoagulant keeps the blood from clotting so the analyzer can count its cells.
How do you mix a freshly filled tube with its additive?
Gently invert it using the tube manufacturer’s instructions. This distributes the additive while limiting cell damage from vigorous mixing.
Where on an infant’s heel is a skin puncture performed when heel sampling is indicated?
Use the medial or lateral plantar surface, along either side on the underside of the heel. Avoid the back curve, where the bone is closer to the skin.
Where do you puncture an adult finger for a routine capillary sample?
Use the side of the fingertip pad on the middle or ring finger. That area provides suitable tissue for collection.
What happens to a capillary specimen if the site is squeezed hard?
Tissue fluid can dilute the blood and the pressure can rupture red cells. Let a drop form with minimal pressure.
In what order are routine capillary microcollection tubes filled when blood gases are absent?
Collect EDTA first, followed by other additive tubes, then serum. Early EDTA collection reduces the chance that clotting or platelet clumping will distort cell counts.
How should you control bleeding after removing a venipuncture needle?
Apply direct pressure with clean gauze while the arm stays straight. Confirm bleeding has stopped before bandaging or letting the patient leave.
Where should you label venipuncture tubes after collection?
Label the tubes in the patient’s presence before leaving, matching the approved patient identifiers and recording the collection details required by the laboratory.
A specimen arrives with identifiers that conflict with the requisition. What should accessioning do?
Hold it and follow the laboratory’s specimen identification and rejection procedure. Notify the appropriate team and arrange recollection when required. Guessing at identity can result in reporting for the wrong patient.
Why can collection-related hemolysis increase a measured potassium result?
Ruptured red cells release their potassium into the sample. The measured value can exceed the patient’s true circulating potassium.
Why is a visibly clotted EDTA sample unsuitable for a CBC?
The clot traps cells and platelets, so the remaining sample cannot provide reliable counts. Follow the laboratory’s rejection and recollection procedure.
What must happen before centrifuging a routine serum tube?
Let the blood clot completely using the tube manufacturer’s and laboratory’s instructions. Spinning too soon can leave fibrin in the serum and interfere with analysis.
What determines whether a retained specimen can be used for an add-on test?
Check the test’s required specimen and additive, remaining volume, and stability under the actual storage conditions. If the sample falls outside those limits, arrange a new collection.
How should a bilirubin specimen be protected during transport?
Shield it from light using the receiving laboratory’s approved container or wrap. Light exposure can degrade bilirubin and lower the measured result.
Why must a secondary aliquot label link back to the original tube?
An aliquot is a portion transferred to another container. Linking it to the original specimen preserves patient identity and lets the lab trace its source and collection details.
What should happen to patient testing after a point-of-care control fails?
Hold patient testing and reporting on the affected system. Troubleshoot, document the action taken, and verify acceptable control results before resuming. Repeat affected patient tests as directed.
A rapid test cassette reads positive after its specified read window. How should you handle it?
Treat the late reading as invalid. Repeat the test according to the kit instructions and read it within the specified window, because the signal can change over time.
Why check the device instructions before switching a waived test from capillary to venous blood?
The instructions specify which specimen types are validated for waived use. A specimen outside that list can give unreliable results and takes the test outside its waived conditions.
When must a glucose meter used for multiple patients be cleaned and disinfected?
After every use, following the manufacturer’s directions. Share only meters intended for multiple patients with instructions for cleaning and disinfection.
Which part of the urine stream goes into a clean-catch container?
Collect the middle portion after cleaning as instructed and letting the first portion go into the toilet. This helps limit contamination from skin or genital flora.
Which voids count in a 24-hour urine collection?
Empty the bladder at the start and discard that urine. Collect every subsequent void, including the one at the 24-hour stop time. Follow the test-specific storage instructions.
How do you explain the difference between a true sputum sample and saliva?
Ask for material brought up by a deep cough from the lower respiratory tract. Saliva comes from the mouth. Follow the collection site’s infection-control procedure.
What does CLIA govern in a clinical laboratory?
The Clinical Laboratory Improvement Amendments set U.S. quality requirements for testing human specimens for health assessment, diagnosis, prevention, or treatment. Requirements depend on the testing performed.
What does external proficiency testing measure?
It checks the laboratory’s testing performance using external challenge samples. Staff handle and test them the same way they handle and test patient specimens under the applicable rules.
What does a competency assessment of laboratory testing personnel verify?
It verifies that an individual can correctly perform their assigned duties. Directly observing the person perform a routine test is one way to assess that ability.
How do you tell whether a change reduced repeated specimen rejections?
Track the rejection rate before and after the change using the same definition and denominator. The comparison shows whether the problem recurs less often.
A caller asks for a patient’s lab results. How do you safeguard confidentiality?
Verify the caller’s identity and authority under the facility’s procedure before sharing information. Route the request through the approved release process.
Where should a used venipuncture needle go immediately after the draw?
Engage its safety feature and place it directly into an accessible, approved sharps container at the point of use. Routine recapping creates an avoidable stick risk.
What should you do immediately after an occupational needlestick?
Wash the site with soap and water, report the exposure immediately, and obtain prompt medical evaluation through the facility’s exposure procedure.
Why is hand hygiene still needed after removing phlebotomy gloves?
Hands can become contaminated through small defects or during glove removal. Clean your hands after removing gloves to interrupt transmission.
Frequently Asked Questions
How many questions are on the ASCP PBT exam?
ASCP BOC gives you two hours to answer 80 multiple-choice questions. Each has one best answer. The exam uses computerized adaptive testing.
What score do I need to pass ASCP PBT?
The minimum passing score is 400 on a scale of 100 to 999. ASCP BOC calculates a scaled score from performance on the adaptive exam.
What is the ASCP PBT pass rate?
ASCP BOC reported a 93% first-time pass rate (1,347 of 1,455) and a 92% overall pass rate (1,379 of 1,506) for PBT(ASCP) in 2025. These rates describe the reported 2025 exam cohorts.
What does ASCP PBT Route 2 currently require?
Route 2 requires high school graduation or equivalent and completion of an acceptable two-part structured program within the past five years. It includes 40 classroom clock hours and clinical training and orientation at an acceptable laboratory, with 100 successful unaided venipunctures.
When can I retake the ASCP PBT exam?
Submit a new application after viewing your official score report. The new eligibility period can begin as early as 30 days after your previous exam. You must continue to meet your current route’s requirements. After five unsuccessful attempts under one route, you must qualify under another route.
Which topic has the most weight on the ASCP PBT exam?
Specimen Collection accounts for 45–50% of the exam. It covers reviewing orders, preparing and identifying patients, choosing sites and equipment, and performing venous and capillary collections.
Explore More ASCP Certifications
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
More From This Family
Videos and articles for deeper review.