100+ Free VT Plumber Practice Questions

Pass your Vermont Journeyman Plumber License Exam exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

~55-65% Pass Rate

100+ Questions

100% Free

1 / 100

Question 1

Score: 0/0

Which agency oversees plumber licensing in Vermont?

Vermont Department of Labor

Vermont Department of Public Safety / Division of Fire Safety

Vermont Agency of Commerce and Community Development

Vermont Department of Health

to track

Same family resources

More Plumber License Prep

Continue through related practice pages, study guides, comparisons, and articles from the same exam family.

Practice Pages

Alabama Journeyman Plumber Practice100 questions Alaska Journeyman Plumber Practice100 questions Arizona Journeyman Plumber Practice100 questions Arkansas Journeyman Plumber Practice100 questions California Journeyman Plumber Practice100 questions Colorado Journeyman Plumber Practice100 questions

Free Journeyman Plumber Practice Test by State 2026: 4,700+ Questions24 min read

2026 Statistics

Key Facts: VT Plumber Exam

70%

Passing Score

VT Division of Fire Safety

~80

Exam Questions

PSI exam format

3 hrs

Time Limit

PSI

IPC

Code Base

Vermont adoption

The Vermont journeyman plumber exam is administered through PSI and overseen by the VT Department of Public Safety / Division of Fire Safety. The exam has approximately 80 multiple-choice questions with a 3-hour time limit, requiring 70% to pass. Vermont uses the IPC with state amendments. The exam is open-book, so bring a clean bound copy of the IPC.

Sample VT Plumber Practice Questions

Try these sample questions to test your VT Plumber exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which agency oversees plumber licensing in Vermont?

A.Vermont Department of Labor

B.Vermont Department of Public Safety / Division of Fire Safety

C.Vermont Agency of Commerce and Community Development

D.Vermont Department of Health

Explanation: The Vermont Department of Public Safety / Division of Fire Safety oversees plumber licensing in the state. This division administers licensing exams, processes applications, and enforces the plumbing code throughout Vermont.

2Vermont's plumbing code is based on which model code?

A.Uniform Plumbing Code (UPC)

B.National Standard Plumbing Code (NSPC)

C.International Plumbing Code (IPC)

D.NFPA 5000 Plumbing Chapter

Explanation: Vermont has adopted the International Plumbing Code (IPC) as the basis for its state plumbing code. The IPC is published by the International Code Council (ICC) and is one of the two major model plumbing codes used in the United States.

3What is the minimum slope for a 3-inch horizontal drainage pipe per the IPC?

A.1/16 inch per foot

B.1/8 inch per foot

C.1/4 inch per foot

D.1/2 inch per foot

Explanation: Per the IPC, horizontal drainage pipes 3 inches or larger in diameter require a minimum slope of 1/8 inch per foot. Pipes smaller than 3 inches require a minimum slope of 1/4 inch per foot. The slope ensures proper drainage flow and prevents solids from settling in the pipe.

4What is the DFU (Drainage Fixture Unit) value for a water closet with a 1.6 GPF flush valve per the IPC?

A.2 DFU

B.3 DFU

C.4 DFU

D.6 DFU

Explanation: Per the IPC, a water closet (toilet) with a flush valve rated at 1.6 GPF or less has a DFU value of 4. This value is used when sizing drainage and vent piping systems. Higher-flow water closets or those with flushometer valves may have different DFU ratings.

5What is the minimum size building sewer pipe per the IPC?

A.2 inches

B.3 inches

C.4 inches

D.6 inches

Explanation: Per the IPC, the minimum size for a building sewer is 3 inches in diameter. However, when a water closet is connected to the building drain, the minimum size downstream of the water closet connection must be at least 3 inches. Many jurisdictions require 4 inches for building sewers.

6According to the IPC, what is the maximum distance between cleanouts in a horizontal drainage pipe?

A.50 feet

B.75 feet

C.100 feet

D.150 feet

Explanation: The IPC requires cleanouts to be installed at intervals not exceeding 100 feet in horizontal drainage lines. Cleanouts must also be installed at each change of direction greater than 45 degrees, at the base of each stack, and at the junction of the building drain and building sewer.

7What is the minimum trap seal depth required by the IPC for most plumbing fixtures?

A.1 inch

B.2 inches

C.3 inches

D.4 inches

Explanation: The IPC requires a minimum trap seal depth of 2 inches for most plumbing fixtures. The maximum trap seal depth is 4 inches. The trap seal prevents sewer gases from entering the building through the drainage system. Some special fixtures may require deeper trap seals.

8Per the IPC, what is the maximum number of DFUs that can be connected to a 2-inch horizontal branch drain?

A.3 DFU

B.6 DFU

C.8 DFU

D.12 DFU

Explanation: Per the IPC drainage fixture unit table, a 2-inch horizontal branch drain can accommodate a maximum of 6 DFUs. This limit ensures adequate flow capacity and prevents overloading of the drainage pipe.

9What type of fitting is required for a horizontal-to-vertical change of direction in a drainage system?

A.Short-radius elbow only

B.Sanitary tee or combination wye-and-eighth bend

C.Any standard elbow or tee fitting

D.Long-sweep elbow only

Explanation: For horizontal-to-vertical transitions in a drainage system, a sanitary tee or a combination wye-and-eighth bend is required. These fittings provide a smooth transition that maintains proper drainage flow patterns and prevents turbulence.

10According to the IPC, what is the minimum pipe size for a building drain that receives the discharge of a water closet?

A.2 inches

B.3 inches

C.4 inches

D.6 inches

Explanation: The IPC requires a minimum 3-inch pipe for any building drain that receives the discharge of a water closet. This ensures adequate capacity for the peak flow generated by water closet flushing and solid waste transport.

About the VT Plumber Exam

Vermont journeyman plumber licensing exam administered by PSI and overseen by the Department of Public Safety / Division of Fire Safety. Based on the International Plumbing Code (IPC) with Vermont-specific amendments. Covers drainage systems, water supply, venting, fixtures and appliances, gas piping, materials, and code administration.

Questions

80 scored questions

Time Limit

3 hours

Passing Score

70%

Exam Fee

$205 (Vermont Department of Public Safety / Division of Fire Safety)

VT Plumber Exam Content Outline

25%

Drainage Systems

Drain pipe sizing, fixture units (DFU), slope requirements, cleanouts, building sewers, indirect waste, and special drainage per IPC with VT amendments

20%

Water Supply Systems

Water pipe sizing, WSFU calculations, backflow prevention, pressure regulation, water heaters, cross-connection control, and potable water protection

20%

Venting Systems

Vent sizing, wet venting, circuit venting, air admittance valves, vent termination, combination waste and vent, and trap seal protection

15%

Fixtures & Appliances

Fixture installation, clearances, accessible fixtures, commercial fixtures, water closets, lavatories, showers, and bathtubs

10%

Gas Piping

Gas pipe sizing, BTU calculations, appliance venting, pressure testing, combustion air, and fuel gas code compliance

10%

Code Administration & Materials

Permits, inspections, plan review, approved materials, pipe materials, joint methods, hangers and supports, and Vermont-specific amendments

How to Pass the VT Plumber Exam

What You Need to Know

Passing score: 70%
Exam length: 80 questions
Time limit: 3 hours
Exam fee: $205

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

VT Plumber Study Tips from Top Performers

1Study the IPC thoroughly — learn to navigate the index and tables quickly for the open-book exam

2Master DFU calculations and drain pipe sizing using IPC fixture unit tables

3Practice vent sizing and understand wet venting, circuit venting, and AAV requirements

4Memorize minimum pipe sizes for common fixtures and trap arm distances

5Review backflow prevention device selection based on hazard level

6Study water heater installation including T&P relief valve discharge requirements

7Practice gas pipe sizing calculations using BTU input ratings

8Understand Vermont-specific amendments to the IPC including frost depth requirements

Frequently Asked Questions

How hard is the Vermont journeyman plumber exam?

The Vermont journeyman plumber exam is moderately challenging with an estimated 55-65% pass rate. The exam has approximately 80 questions based on the IPC with Vermont amendments and requires 70% to pass. Strong knowledge of pipe sizing, DFU calculations, and venting is essential.

What plumbing code does Vermont use?

Vermont uses the International Plumbing Code (IPC) with Vermont-specific amendments adopted by the Department of Public Safety / Division of Fire Safety. A clean, bound copy of the IPC is typically allowed during the PSI-administered exam.

How much does the Vermont plumber exam cost?

The Vermont journeyman plumber exam fee is approximately $205. Additional fees may apply for the license application. Check with the VT Department of Public Safety / Division of Fire Safety for current fees.

What are the experience requirements?

Vermont requires completion of an approved apprenticeship or equivalent experience under a licensed plumber. Contact the Division of Fire Safety for detailed eligibility requirements.