PracticeVideosBlogFlashcardsEspañol
All Practice Exams

Free Practice Questions for FL Plumber

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
Exam pass rate: ~50-55%
395+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Plumber License

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

North Carolina Journeyman Plumber

Practice QuestionsStudy GuideFlashcards1 blog

Iowa Journeyman Plumber

Practice QuestionsStudy GuideFlashcards1 blog

Texas Journeyman Plumber

Practice QuestionsStudy GuideFlashcards1 video1 blog

Maryland Journeyman Plumber

Practice QuestionsStudy GuideFlashcards1 blog

Journeyman Plumber

Practice QuestionsStudy GuideCheat SheetFlashcards1 blog

Colorado Journeyman Plumber

Practice QuestionsNational Study GuideFlashcards1 blog

More From This Family

Videos and articles for deeper review.

VideoFree Journeyman Plumber Practice Test by State 2026: 4,600+ QuestionsArticleHow to Become a Plumber in 2026: License, Salary by State & Career Path16 min readArticleFree Journeyman Plumber Practice Test by State 2026: 4,600+ Questions24 min read
Exam Review

Key Facts: FL Plumber Exam

70%

Passing Score

DBPR

110

Trade Questions

9-hour limit

$295

Total Fees

DBPR/PTI

FPC

Code Base

Based on IPC

Florida's plumber exam is one of the most comprehensive in the nation. The trade exam includes 110 questions with an isometric drawing component requiring candidates to interpret plumbing system diagrams. The 9-hour time limit and 70% passing score make thorough code knowledge essential. A separate business/finance exam is also required.

Sample FL Plumber Practice Questions

Try these sample questions to review concepts for the FL Plumber exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 395+ question experience with AI tutoring.

1Under the Florida Plumbing Code (FPC), what is the minimum size of a building sewer?
A.2 inches
B.3 inches
C.4 inches
D.6 inches
Explanation: Under the Florida Building Code — Plumbing (based on the IPC), building drains and building sewers are sized from Table 710.1(1). In practice and on Florida plumbing exams, the minimum building sewer size used for sizing questions is 4 inches. A building drain serving a water closet must be at least 3 inches (FLPC), but the building sewer run to the public sewer or private disposal system is typically a minimum of 4 inches.
2The Florida Plumbing General Trade Knowledge exam includes an isometric drawing portion. What does this portion require candidates to do?
A.Draw plumbing fixtures freehand without a floor plan
B.Produce five plumbing isometric drawings from floor plans that are graded on legibility, orientation, flow, angles, piping, labeling, vents, and fixtures
C.Use architectural CAD software to generate 3D models
D.Create full construction blueprints for an entire building
Explanation: Per the DBPR Plumbing Candidate Information Booklet (const_p_cib.pdf), the morning session includes 5 isometric drawings worth up to 10 points each. Graders score legibility, orientation, flow direction, 30-60-90 angles, piping, labeling, vents, and fixtures. Candidates must DRAW the isometrics from floor plans, not merely interpret printed diagrams.
3Under the FPC, what is the minimum slope for a 4-inch horizontal drainage pipe?
A.1/16 inch per foot
B.1/8 inch per foot
C.1/4 inch per foot
D.1/2 inch per foot
Explanation: Per FPC Table 704.1, horizontal drainage pipes 3 inches and larger require a minimum slope of 1/8 inch per foot. This slope ensures adequate velocity (approximately 2 feet per second) to transport solids effectively through the drainage system.
4What is the DFU value for a residential water closet (1.6 gpf) under the FPC?
A.2 DFU
B.3 DFU
C.4 DFU
D.6 DFU
Explanation: Per FPC Table 709.1, a residential water closet with 1.6 gallons per flush is rated at 3 DFU. This value is consistent with the IPC base code and is used for drainage and vent pipe sizing calculations throughout the Florida plumbing system.
5Under DBPR regulations, what license is required to perform plumbing work in Florida?
A.Only a local county license
B.A state-issued certified or registered plumber license from DBPR
C.A federal plumbing certification
D.No license required for residential plumbing
Explanation: Per Florida Statute 489, plumbing contractors must hold a state-issued certified or registered license through the Department of Business and Professional Regulation (DBPR). Certified licensees can work statewide; registered licensees work within specific jurisdictions.
6Per the DBPR Plumbing Candidate Information Booklet, how is the Plumbing General Trade Knowledge examination structured?
A.80 multiple-choice questions over 4 hours with no drawings
B.100 multiple-choice questions over 5 hours with no drawings
C.110 multiple-choice questions plus 5 isometric drawings (160 possible points) over two 4.5-hour sessions
D.120 multiple-choice questions over 6 hours covering only business and finance
Explanation: Per the DBPR Plumbing CIB, the trade exam totals 160 possible points: 110 equally weighted multiple-choice questions (1 point each) plus 5 isometric drawings (up to 10 points each). Morning session: 45 MCQ + 5 drawings (4.5 hours). Afternoon session: 65 MCQ (4.5 hours). Passing requires 112 of 160 points (70%).
7Under the FPC, what type of backflow preventer is required for a high-hazard cross-connection?
A.Atmospheric vacuum breaker (AVB)
B.Pressure vacuum breaker (PVB)
C.Double check valve assembly (DCVA)
D.Reduced pressure zone (RPZ) assembly
Explanation: Per FPC Section 608.16, reduced pressure zone (RPZ) backflow preventers are required for high-hazard cross-connections. Florida's high water table and warm climate increase contamination risks, making proper backflow prevention critical for public health protection.
8Per the FPC, what is the minimum trap seal depth for a standard plumbing fixture?
A.1 inch
B.2 inches
C.3 inches
D.4 inches
Explanation: Per FPC Section 1002.1, the minimum trap seal depth is 2 inches and the maximum is 4 inches. In Florida's warm climate, trap seals may evaporate faster, making trap seal primers especially important for infrequently used fixtures.
9Under the FPC, what is the maximum static water pressure allowed in a building?
A.60 psi
B.80 psi
C.100 psi
D.125 psi
Explanation: Per FPC Section 604.8, water pressure shall not exceed 80 psi static. Where supply pressure exceeds 80 psi, a pressure-reducing valve must be installed. Florida's municipal water systems can have variable pressures requiring careful regulation.
10On the Florida plumber exam isometric drawings, how must vent piping be treated?
A.Vents may be omitted if drainage piping is shown
B.All vents must be properly indicated on the isometric (graders award points for correct vent depiction)
C.Only the main stack vent is shown; branch vents are never drawn
D.Vents are drawn only if the floor plan labels them in red
Explanation: Per the DBPR Plumbing CIB isometric grading criteria, "Vents" is a scored criterion (16 points before conversion). All vents must be properly indicated on each isometric drawing. Omitting required vents costs points even if drainage piping is otherwise correct.

About the FL Plumber Exam

The Florida plumber exam is administered by Professional Testing Inc. under DBPR. The trade exam has 110 questions including 45 trade knowledge, 65 plan reading/code, and isometric drawing interpretation with a 9-hour time limit. A separate 120-question business exam covers Florida business law, lien law, and financial management.

Exam sponsor: Florida DBPR / Professional Testing Inc.. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Questions

110 questions

Time Limit

9 hours (trade exam)

Passing Score

70%

Exam / Certification Fees

$135 + $80 + $80

Exam sponsor website

Reported exam pass rate: ~50-55%. This describes exam candidates, not OpenExamPrep users or results from using our resources. Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

25%

Drainage & Waste Systems

Drain sizing, DFU calculations, slope requirements, cleanouts, and Florida-specific building sewer requirements

20%

Water Supply & Distribution

Pipe sizing, WSFU, backflow prevention, water heaters, pressure regulation, and reclaimed water systems

20%

Venting & Isometric Drawings

Vent sizing, wet venting, AAVs, vent termination, and interpreting isometric plumbing diagrams

15%

Gas Piping & Special Systems

Gas pipe sizing, BTU calculations, storm drainage, grease interceptors, and sewage ejectors

20%

Code Administration & Business

DBPR licensing, permits, inspections, Florida business law, lien law, and contractor responsibilities

Preparing for the FL Plumber Exam

What You Need to Know

  • Passing score: 70%
  • Exam length: 110 questions
  • Time limit: 9 hours (trade exam)
  • Exam / certification fees: $135 + $80 + $80 Official sources

Using Our Practice Resources

  • Work through all 395 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

FL Plumber: Suggested Study Strategy

1Practice isometric drawing interpretation — this section is unique to Florida
2Master DFU and WSFU calculations for pipe sizing
3Study Florida-specific amendments to the IPC (building sewer minimums, reclaimed water)
4Learn gas pipe sizing using BTU/hr demand calculations
5Prepare separately for the business exam: Florida lien law, workers comp, and financial management
6Practice timed exams — 9 hours seems long but the isometric section requires careful analysis

Frequently Asked Questions

What is the Florida plumber exam format?

The trade exam has 110 questions: 45 trade knowledge, 65 plan reading/code, and approximately 5 isometric drawing questions, with a 9-hour time limit. A separate 120-question business exam covers Florida business law, lien law, and financial management. Both require 70% to pass.

Does the Florida exam have isometric drawings?

Yes, the Florida plumber trade exam includes isometric drawing interpretation questions. Candidates must analyze plumbing system diagrams, identify pipe sizes, trace vent paths, and calculate DFU loads from isometric representations.

What code does Florida use?

Florida uses the Florida Plumbing Code (FPC), which is based on the International Plumbing Code (IPC) with Florida-specific amendments addressing the state's climate, high water table, and hurricane-prone conditions.

How much does the Florida plumber exam cost?

The total exam fees are approximately $295: $135 application fee, $80 for the trade exam, and $80 for the business exam. Additional costs include code books and study materials.