100+ Free RI Plumber Practice Questions
Pass your Rhode Island Journeyman Plumber License Exam exam on the first try — instant access, no signup required.
Under Rhode Island's adoption of the IPC, what is the minimum size drain pipe permitted for a water closet?
More Plumber License Prep
Continue through related practice pages, study guides, comparisons, and articles from the same exam family.
Key Facts: RI Plumber Exam
70%
Passing Score
Department of Labor and Training
80
Questions
3 hours
~$230
Exam Fee
PSI
IPC
Code
Department of Labor and Training
Rhode Island's journeyman plumber exam is administered by PSI on behalf of the Department of Labor and Training. It has approximately 80 questions with a 3 hours time limit and requires 70% to pass. The exam fee is ~$230. Rhode Island uses the IPC as its plumbing code.
Sample RI Plumber Practice Questions
Try these sample questions to test your RI Plumber exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.
1Under Rhode Island's adoption of the IPC, what is the minimum size drain pipe permitted for a water closet?
2What is the minimum slope for a 4-inch horizontal drainage pipe in Rhode Island?
3What is the DFU value for a 1.6 GPF water closet in Rhode Island?
4What backflow preventer is required for high-hazard cross-connections in Rhode Island?
5What is the minimum trap seal depth in Rhode Island?
6What is the minimum vent pipe size in Rhode Island?
7What is the maximum static water pressure in Rhode Island?
8When is a cleanout required on horizontal drainage in Rhode Island?
9What device must be on every water heater in Rhode Island?
10What is the max shower/bathtub delivery temperature in Rhode Island?
About the RI Plumber Exam
Rhode Island-specific journeyman plumber licensing exam based on the IPC covering drainage, water supply, venting, gas piping, and fixtures
Questions
80 scored questions
Time Limit
3 hours
Passing Score
70%
Exam Fee
~$230 (Department of Labor and Training / PSI)
RI Plumber Exam Content Outline
Drainage Systems & Pipe Sizing
Drain sizing, fixture units (DFU), slope requirements, cleanouts, building drain and sewer sizing per IPC
Water Supply & Distribution
Pipe sizing, backflow prevention, pressure regulation, cross-connection control, and water service requirements
Venting Systems
Vent sizing, wet venting, air admittance valves, vent termination, circuit venting, and combination waste and vent
Fixtures & Appliances
Fixture installation, clearances, water heaters, accessible fixtures, and commercial fixture requirements
Gas Piping
Gas pipe sizing, appliance venting, pressure testing, BTU calculations, CSST bonding, and combustion air
Code Administration & Special Systems
Permits, inspections, plan review, Rhode Island state amendments, medical gas, grease interceptors, and storm drainage
How to Pass the RI Plumber Exam
What You Need to Know
- Passing score: 70%
- Exam length: 80 questions
- Time limit: 3 hours
- Exam fee: ~$230
Keys to Passing
- Complete 500+ practice questions
- Score 80%+ consistently before scheduling
- Focus on highest-weighted sections
- Use our AI tutor for tough concepts
RI Plumber Study Tips from Top Performers
Frequently Asked Questions
What plumbing code does Rhode Island use?
Rhode Island uses the IPC for its plumbing licensing exam. Candidates should study the current adopted edition with any state-specific amendments.
Who administers the Rhode Island plumber exam?
The exam is administered by PSI on behalf of the Department of Labor and Training. Register through PSI after your application is approved.
What is the passing score?
Rhode Island requires 70% to pass the journeyman plumber exam. The exam has 80 questions with a 3 hours time limit.
Is the exam open book?
Most PSI-administered plumbing exams allow a bound copy of the adopted plumbing code. No loose pages, handwritten notes, or electronic devices are permitted. Check current exam policies before your test date.