FE Mechanical Vocabulary Game
Exam terms with clues and explanations by OpenExamPrep.
About the FE Mechanical Vocabulary Games
4 free word games built on 44 FE Mechanical terms across 14 topics. Every game deals terms at random and shows what each term means, so you can keep playing as long as you like.
How to Play
- 1.Read the clue and type the term (3 to 6 letters).
- 2.Green: right spot. Yellow: wrong spot. Gray: not in the term.
- 3.Solve it in 6 tries, then read the explanation.
- 1.Swap two neighboring tiles to line up 3 of the same term.
- 2.Longer lines, two lines at once and chains score more.
- 3.Play until no swap can make a line.
- 1.Flip two cards. A matching pair stays face up.
- 2.Each pair you find shows what the term means.
- 3.Clear the board in as few moves as you can.
- 1.Find each listed term in the letter grid.
- 2.Drag across its letters: across, down or diagonally.
- 3.Find all five as fast as you can.
Explore More FE Exam
Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.
2 Job Wiki
Free CE
Course PlaylistMore From This Family
Videos and articles for deeper review.
Topics in the FE Mechanical Vocabulary Game
Engineering Mathematics
Probability and Statistics
Professional practice
Engineering Economics
Electricity and Magnetism
Forces and equilibrium
Dynamics and Vibrations
Mechanics of Materials
Materials and Processing
Fluid Mechanics
Engineering Thermodynamics
Heat Transfer
Instrumentation and Controls
Mechanical Design
Sources for these terms (19)
- NCEES Fundamentals of Engineering (FE) Mechanical CBT Exam Specifications · Source checked 2026-11-02
- NCEES Model Rules (Revised August 2026) · Source checked 2026-11-02
- NIST/SEMATECH e-Handbook of Statistical Methods: 1.3.5.1 Measures of Location · Source checked 2026-11-02
- NIST/SEMATECH e-Handbook of Statistical Methods: 1.3.6.6.1 Normal Distribution · Source checked 2026-11-02
- NIST Handbook 135: Life-Cycle Costing Manual for the Federal Energy Management Program (2025 Edition) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Classical Physics (DOE-HDBK-1010-92) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Electrical Science, Volume 1 of 4 (DOE-HDBK-1011/1-92) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Thermodynamics, Heat Transfer, and Fluid Flow, Volume 1 of 3 (DOE-HDBK-1012/1-92) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Thermodynamics, Heat Transfer, and Fluid Flow, Volume 2 of 3 (DOE-HDBK-1012/2-92) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Thermodynamics, Heat Transfer, and Fluid Flow, Volume 3 of 3 (DOE-HDBK-1012/3-92) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Instrumentation and Control, Volume 1 of 2 (DOE-HDBK-1013/1-92) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Mathematics, Volume 1 of 2 (DOE-HDBK-1014/1-92) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Mathematics, Volume 2 of 2 (DOE-HDBK-1014/2-92) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Material Science, Volume 1 of 2 (DOE-HDBK-1017/1-93) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Material Science, Volume 2 of 2 (DOE-HDBK-1017/2-93) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Mechanical Science, Volume 1 of 2 (DOE-HDBK-1018/1-93) · Source checked 2026-11-02
- DOE Fundamentals Handbook: Mechanical Science, Volume 2 of 2 (DOE-HDBK-1018/2-93) · Source checked 2026-11-02
- NASA Glenn Research Center: Torque (Moment) · Source checked 2026-11-02
- NASA Glenn Research Center: Role of the Mach Number · Source checked 2026-11-02
About the FE Mechanical Exam
The FE Mechanical exam is one of seven NCEES Fundamentals of Engineering discipline exams and is the first national licensure step toward becoming a Professional Engineer (PE). It is a 110-question computer-based exam covering 15 mechanical engineering knowledge areas including statics, dynamics, mechanics of materials, fluid mechanics, thermodynamics, heat transfer, mechanical design, and controls. Most candidates take it during their senior year of an EAC/ABET-accredited engineering program or shortly after graduation.
Exam sponsor: NCEES (Pearson VUE). The requirements and fees below concern the certification or admission exam, separate from our free practice resources.
Assessment
110 multiple-choice computer-based questions with on-screen NCEES FE Reference Handbook
Time Limit
5 hours 20 minutes
Passing Score
Scaled cut score (NCEES does not publish a fixed percentage)
Reported exam pass rate: ~65%. NCEES Jan 2026 first-time pass rate for FE Mechanical was approximately 65% This describes exam candidates, not OpenExamPrep users or results from using our resources. Exam sponsor website
Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.
Frequently Asked Questions
Is the FE Mechanical vocabulary game free?
Yes. The game is free to play with no sign-up. Signing in adds AI explanations for any term.
How do the FE Mechanical vocabulary games work?
There are 4 games built on 44 FE Mechanical terms. In Guess the Term, a clue describes one term and you have six tries to spell it, with green, yellow and gray letters showing how close you are. In Term Match, six terms appear as colored tiles; swap neighbors to line up three or more of the same term, and each match shows what the term means. In Term Pairs, twelve face-down cards hide six pairs of terms; flip two at a time to find each pair, and every pair you find shows what the term means. In Term Search, five terms hide in a grid of letters, reading across, down or diagonally; drag across a term to circle it, and each term you find shows what it means.
Where do the FE Mechanical terms come from?
OpenExamPrep researched each term from the NCEES (Pearson VUE) content outline and primary sources, listed under Sources on this page. The game is independent study material, not an official exam resource.
How many questions are on the FE Mechanical exam?
The FE Mechanical exam has 110 multiple-choice questions delivered as a computer-based test. The total appointment is 6 hours, including a tutorial and a 25-minute scheduled break, leaving 5 hours 20 minutes of actual testing time. NCEES uses an on-screen reference handbook and accepts only NCEES-approved calculators (Casio FX-115 series, TI-30X, TI-36X, or HP 35s).
What is the FE Mechanical pass rate?
NCEES reported approximately 65% first-time pass rate for FE Mechanical in early 2026. Pass rates are higher for those who test within 12 months of graduation from an EAC/ABET-accredited program. Repeat-taker rates are typically 30-40%. NCEES does not publish a fixed numeric cut score — results are reported as pass/fail.