Best Refrigerant Leak Detectors for HVAC Technicians: 2026 Buying Guide
Video
What is the primary purpose of an EPA Section 608 certification?
Nate Hvac Fundamentals
Question · Easy
Your heart has these. So do pipes.
Short
Best Manifold Gauge Set for HVAC Technicians: Complete 2026 Buying Guide
In-depth guide to the best manifold gauge sets for HVAC technicians preparing for EPA 608 and NATE HVAC certification. Covers Yellow Jacket vs budget alternatives, 2-valve vs 4-valve manifolds, R-410A vs R-454B A2L refrigerant compatibility, subcooling and superheat calculations, and what gauge reading skills are tested on EPA Section 608 and NATE exams in 2026.
Blog
What does an authorized worker verify after applying lockout/tagout?
HVAC Fundamentals
Flashcard
Which personal protective equipment (PPE) is required when handling refrigerants?
Amount of heat required to raise one pound of water one degree Fahrenheit at standard conditions.
HVAC fundamentals
Guess the Term
Introduction & Exam Overview
0.1 NATE Certification Pathways: CHP-5 vs. Traditional Core & Specialty
Study guide
Cheat sheet
What does the gauge manifold set measure in an HVAC system?
Read the clue and guess the term in 6 tries.
Game
Where do you look for a chemical’s handling hazards and first-aid measures?
Which method of heat transfer occurs when warm air rises and cool air sinks?
Complete 2026 guide to refrigerant leak detectors for EPA 608 and NATE HVAC certification candidates. Compares heated diode vs infrared (NDIR) sensors across Fieldpiece, Elitech, and Inficon models, with A2L notes for R-454B and R-32 equipment. Covers EPA Section 608 leak rate thresholds, the 2026 AIM Act 15-pound rule, sensitivity, false positives, and the proper leak detection procedure tested on certification exams.
Term now used for written material about a hazardous chemical that an employer must keep in the workplace for each one used.
A technician measures the temperature difference across the evaporator coil and finds it to be 8°F. What is the most likely cause?
Nate Hvac Service
Question · Medium
What is three-point contact when climbing a portable ladder?
What is the normal operating pressure for R-410A in a residential air conditioning system at 75°F ambient temperature?
Hard hats, safety glasses and respirators are examples; a workplace hazard assessment decides when it is needed.
0.2 Exam Logistics, Scoring, EPA 608 Prerequisites & Recertification
During the compression stroke in a reciprocating compressor, what happens to the refrigerant?
Swap tiles to line up three of the same term.
Term Match
Why ream the inside of freshly cut copper tubing?
What is the purpose of the metering device in a refrigeration system?
___ team: employees designated by the employer to handle and control actual or potential leaks or spills of dangerous substances.
What type of meter is used to measure electrical current draw in an HVAC circuit?
Nate Hvac Electrical Controls
What does a tubing bender preserve when changing the direction of a copper line?
Which brazing technique is recommended when connecting copper refrigerant lines?
Nate Hvac Installation
Unit of electrical resistance equal to one volt per ampere.
Electrical and controls
0.3 Effective Study Strategies & Recommended Field Test Preparation
What is the minimum required test pressure for a nitrogen pressure test on an R-410A system?
Flip two cards at a time to find matching terms.
Term Pairs
What should you do when an HVAC route crosses a structural truss member?
A system has the following readings: Suction pressure 75 psig (corresponds to 45°F), Suction line temperature 55°F. What is the superheat?
Question · Hard
Unit of electric potential difference equal to one watt per ampere.
What is the approximate BTU/hr capacity of a 3-ton air conditioning system?
Nate Hvac Comfort Airflow
Where does refrigerant absorb heat from indoor air during cooling?
Which type of refrigerant oil is compatible with R-410A systems?
Unit of power equal to one joule per second.
Chapter 1: HVAC Fundamentals & Safety
1.1 Personal & Job-Site Safety, PPE, Lockout/Tagout, and OSHA Compliance
The formula for calculating CFM using the temperature rise method is:
Find five hidden terms in a grid of letters.
Term Search
What does a metering device do in a vapor-compression system?
What is the purpose of a contactor in an HVAC system?
Protective device placed in a circuit to guard against a short.
Loading more…
