Free Practice Questions for SCE PE Fire Protection

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card

60+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More Saudi Council of Engineers Professional Exams

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

SCE Practice of Engineering (PE) — Water Resources and Environmental Engineering (Saudi Arabia)

Practice Questions103 questions

Exam Review

Key Facts: SCE PE Fire Protection Exam

English

Official assessment language

SCE Professional Exams Guide, 2025

9 topic areas

Published FPE scope

NCA FPE instruction manual, 2019

Common + discipline

Required examination parts

SCE Professional Exams Guide, 2025

Study for SCE-PE Fire Protection Engineering with 60 free independent English-language MCQs. Official English, paper-based delivery is described in the 2025 SCE guide. Its MCQ description differs from the 2019 FPE manual's MCQ-plus-essay format; confirm current component, duration and scoring instructions before booking. This study adaptation does not simulate the official assessment or replace essay and performance preparation.

Sample SCE PE Fire Protection Practice Questions

Try these sample questions to review concepts for the SCE PE Fire Protection exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 60+ question experience with AI tutoring.

1A design fire follows Q = αt², with Q in kW, time t in seconds from effective ignition, and α = 0.0469 kW/s². Neglect an incubation period. When does Q reach 2,500 kW?

A.115 s

B.231 s

C.462 s

D.53,305 s

Explanation: Rearranging the specified growth model gives t = sqrt(Q/α). Thus t = sqrt(2,500/0.0469) = 230.9 s, or approximately 231 s.

2A pool fire has diameter D = 1.50 m and estimated mean flame height L = 4.00 m. Invert Heskestad's correlation L = 0.235Q^(2/5) − 1.02D, with Q in kW, to estimate total heat release rate.

A.1,195 kW

B.1,851 kW

C.2,686 kW

D.3.54 kW

Explanation: Rearranging gives Q = [(L + 1.02D)/0.235]^(5/2). Substituting the specified dimensions gives [(4.00 + 1.02 × 1.50)/0.235]^2.5 = 2,686.23 kW; this is a correlation-based estimate rather than a direct heat release measurement.

3A compartment is 4.0 m × 4.0 m × 3.0 m with one open doorway 1.0 m wide and 2.25 m high. Estimate the flashover heat release rate using Q = 7.8A_T + 378A_o√H_o kW, where A_T is the internal surface area excluding the opening, A_o is opening area, and H_o is opening height.

A.1,882 kW

B.1,276 kW

C.1,457 kW

D.2,520 kW

Explanation: The gross internal surface area is 2(16 + 12 + 12) = 80 m², so A_T = 80 − 2.25 = 77.75 m². The correlation gives Q = 7.8(77.75) + 378(2.25)(1.5) = 606.45 + 1,275.75 = 1,882.2 kW; this is an empirical estimate rather than a guaranteed ignition threshold.

4For an idealized point source, use target flux q = χQ cosθ/(4πR²), where θ is the angle between the target's outward-facing normal toward the source and the line of sight. Given Q = 4,000 kW, χ = 0.30, R = 3.5 m, θ = 60°, and unit atmospheric transmission, what flux is incident on the target? Assume the point-source approximation is suitable.

A.7.80 kW/m²

B.12.99 kW/m²

C.13.64 kW/m²

D.3.90 kW/m²

Explanation: The radiative power is 0.30 × 4,000 = 1,200 kW and cos60° = 0.5. Thus q = 1,200 × 0.5/[4π(3.5)²] = 3.8977 kW/m², rounded to 3.90 kW/m²; the orientation halves the normal-incidence flux.

5For a semi-infinite solid with fixed thermal properties and ignition temperature, use the idealized conduction model t_ig = (π/4)kρc[(T_ig − T_0)/q_net]². If the constant net heat flux doubles, what happens to the predicted ignition time?

A.It halves

B.It doubles

C.It falls to one-quarter

D.It falls to one-sixteenth

Explanation: In the stated model, ignition time is inversely proportional to the square of net heat flux. Doubling that flux therefore multiplies the predicted time by 1/2² = 1/4.

6For conventional organic fuels, oxygen consumption calorimetry commonly estimates heat release using approximately how much energy per gram of oxygen consumed?

A.3.0 kJ/g of O₂

B.13.1 kJ/g of O₂

C.44.0 kJ/g of O₂

D.13.1 J/g of O₂

Explanation: The commonly used oxygen consumption factor is approximately 13.1 kJ per gram of O₂ consumed. It is a useful approximation for conventional organic fuels, with corrections or fuel-specific factors needed where combustion chemistry warrants them.

7Which feature distinguishes a diffusion flame, such as an ordinary liquid pool flame, from a premixed flame?

A.Fuel and oxidizer are mixed before entering the reaction zone

B.The fuel is necessarily burning as a solid surface without vaporization

C.The flame speed is necessarily supersonic

D.Fuel and oxidizer arrive separately and mix as combustion proceeds

Explanation: In a diffusion flame, fuel vapor and oxidizer are initially separated and must mix to react. A premixed flame instead propagates through fuel and oxidizer that have already been mixed.

8An idealized optically thick smoke layer is at 800 K with effective emissivity 0.90. Using E = εσT⁴ and σ = 5.67 × 10⁻⁸ W/(m²·K⁴), what is its emissive power, before subtracting radiation received from surroundings?

A.20.9 kW/m²

B.23.2 kW/m²

C.20,902 kW/m²

D.0.0261 kW/m²

Explanation: E = 0.90 × 5.67 × 10⁻⁸ × 800⁴ = 20,902 W/m², or 20.9 kW/m². Emissive power differs from net radiative exchange, which also depends on the receiving surfaces and geometry.

9A deluge system fails on demand if its water supply fails (probability 0.02) or both redundant release solenoids fail (probability 0.05 for each). All three basic events are independent. What is the exact probability of system failure?

A.0.02250

B.0.12000

C.0.02245

D.0.00005

Explanation: Both solenoids fail with probability 0.05² = 0.0025. The union with water supply failure is 0.02 + 0.0025 − 0.02(0.0025) = 0.02245; subtracting the intersection avoids double counting.

10An event tree starts with fire frequency 0.04 per year. Detection succeeds with probability 0.95. Given detection, suppression succeeds with probability 0.90. Given detection and suppression failure, containment succeeds with probability 0.98. What is the frequency of the branch with successful detection, failed suppression, and successful containment?

A.0.003724 per year

B.0.034200 per year

C.0.000076 per year

D.0.003800 per year

Explanation: Multiply the initiating frequency by the conditional probability at each selected branch. The result is 0.04 × 0.95 × (1 − 0.90) × 0.98 = 0.003724 per year.

About the SCE PE Fire Protection Exam

Fire Protection Engineering is a named discipline of the Saudi Council of Engineers Practice of Engineering (SCE-PE) Exam. The 2025 SCE guide identifies English delivery through Qiyas and a mandatory common general part. The published FPE instruction manual provides nine technical topic areas, including fire dynamics, prevention, detection, egress, passive protection, suppression and explosions. This independent English-language MCQ study adaptation by OpenExamPrep provides 60 original practice questions. It is not an official translation or format simulation and does not substitute for producing essay solutions, demonstrating practical competence, or completing any required official assessment component. Current essay and item-count details need confirmation because the older discipline manual and newer general guide describe the format differently.

Exam sponsor: Saudi Council of Engineers (SCE) / National Center for Assessment (Qiyas / ETEC). The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Mandatory common general part plus Fire Protection Engineering discipline part. The 2025 guide describes MCQs; the 2019 discipline manual also requires essays. Confirm the current sitting's component instructions with SCE/Qiyas

Time Limit

2019 manual: 4 hours discipline plus 2.5 hours common, separated by a 1-hour break; current duration not independently confirmed

Passing Score

2019 manual: at least 60% in each part, with MCQs weighted 60% and essays 40%; current scoring instructions require confirmation

Exam / Certification Fees

Published registration route: SAR 1,000 SCE application plus SAR 500 per Qiyas part, totaling SAR 2,000 for both; confirm current invoices

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Official sources

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

13%

Principles of Fire (FPE-T1)

Fire growth, combustion, flame height, heat release and radiation.

Information and Analysis for Fire Protection (FPE-T2)

Fault trees, event trees, probability and reliability.

10%

Fire Prevention (FPE-T3)

Liquid classes, hazardous locations, hot work, charge relaxation and ventilation.

10%

Fire Detection (FPE-T4)

Detector principles, thermal response, batteries, voltage drop and notification.

10%

Human Behavior in Fire and Means of Egress (FPE-T5)

Pre-movement, ASET/RSET, exit separation, crowd flow and visibility.

13%

Passive Fire Protection Systems (FPE-T6)

Steel heating, walls, doors, firestops, timber, fire load and pressurization.

17%

Active Fire Protection: Water-Based Suppression (FPE-T7)

Sprinkler systems, flow and pressure, friction, water supply, storage and pumps.

13%

Active Fire Protection: Non-Water Based Suppression (FPE-T8)

Clean-agent quantities, design concentrations, exposure considerations and foam selection.

Explosion Principles and Protection (FPE-T9)

Propagation modes, mixture LFL, dust index and TNT-equivalency screening.

Preparing for the SCE PE Fire Protection Exam

What You Need to Know

Passing score: 2019 manual: at least 60% in each part, with MCQs weighted 60% and essays 40%; current scoring instructions require confirmation
Assessment: Mandatory common general part plus Fire Protection Engineering discipline part. The 2025 guide describes MCQs; the 2019 discipline manual also requires essays. Confirm the current sitting's component instructions with SCE/Qiyas
Time limit: 2019 manual: 4 hours discipline plus 2.5 hours common, separated by a 1-hour break; current duration not independently confirmed
Exam / certification fees: Published registration route: SAR 1,000 SCE application plus SAR 500 per Qiyas part, totaling SAR 2,000 for both; confirm current invoices Official sources

Using Our Practice Resources

Work through all 60 available questions
Review every answer and explanation
Track weak areas and revisit them
Use our AI tutor for tough concepts

SCE PE Fire Protection: Suggested Study Strategy

1Work calculations from the supplied units and assumptions, then check rounding and whether a real design requires additional criteria.

2For code-based study, distinguish the governing Saudi code and adopted edition from NFPA, IBC and other reference frameworks. Do not combine their limits without checking applicability.

3Practice producing full engineering solutions as well as selecting MCQ answers, particularly while the current essay requirement remains unresolved.

4Study all nine FPE topic areas and prepare separately for the mandatory common general part.

Frequently Asked Questions

Is Fire Protection Engineering a verified SCE examination discipline?

Yes. The SCE Professional Exams Guide lists Fire Protection Engineering among the SCE-PE disciplines, and SCE hosts its NCA instruction manual and topic specifications. It belongs to the Practice of Engineering pathway rather than a separate general Safety Engineer classification exam.

What are the official format and language?

SCE's 2025 guide explicitly describes English, paper-based MCQ delivery through Qiyas. The 2019 FPE manual instead describes 30 MCQs and 2 essays selected from 4 prompts in a 4-hour discipline session, plus 30 MCQs and 2 essays in a 2.5-hour common session. That manual specifies 60% to pass each part. These historical details should not be treated as confirmed 2026 sitting instructions; SCE/Qiyas should confirm whether essays, timings and scoring remain unchanged. No separate mandatory assignment, oral, practical or case-study component was identified in the retrieved examination documents, but unpublished requirements are not assumed absent.

Who can apply, and what does the published route cost?

The 2025 guide describes engineers with at least five years of practical post-graduate experience. SCE's PE page requires valid engineering membership and application approval, then lists SAR 1,000 to SCE and SAR 500 for each of the common and discipline parts through Qiyas. The 2024 accreditation announcement also uses five years for the Professional grade; the older PE page's eight-year promotion statement should not override that newer policy. Confirm current eligibility and invoices with SCE.

Does this practice bank simulate the real assessment?

No. It is independent English-language MCQ study material by OpenExamPrep. It does not reproduce official questions, claim official approval, provide an official translation, simulate essay writing, or substitute for practical and performance preparation. Numerical assumptions in individual exercises are not universal code requirements.

Which topic weights are used, and when were the sources checked?

Sources were independently rechecked on 13 October 2026. The nine topic weights are from the published 2019 NCA FPE table: 13%, 7%, 10%, 10%, 10%, 13%, 17%, 13% and 7%. The 2025 SCE guide continues to list the discipline and these broad topics. No specific 2026 sitting date or revised discipline table was confirmed. Some SCE direct downloads were unavailable during checking; indexed official text supplied the exam evidence.