100+ Free RI Roofing Contractor Practice Questions

Pass your Rhode Island Commercial Roofing Contractor Exam exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

55% Pass Rate

100+ Questions

100% Free

1 / 100

Question 1

Score: 0/0

What is the primary concern when installing a new roof membrane over an existing wet roof insulation?

The additional weight may exceed structural capacity

Trapped moisture will cause blistering, delamination, and premature failure

The new membrane may not adhere properly to the old surface

Building codes prohibit overlay installation

to track

Same family resources

Explore More Roofing Contractor License

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

North Carolina Roofing Contractor

Practice Questions100 questions

1 blog

More From This Family

Videos and articles for deeper review.

ArticleFree Roofing Contractor Practice Test by State 2026: 1,900+ Questions22 min read

2026 Statistics

Key Facts: RI Roofing Contractor Exam

70%

Passing Score

PSI

100 Q

Practice Questions

OpenExamPrep

3 hrs

Exam Time

PSI

$580

Total Fees

RI CRB

$2M

Liability Insurance

RI CRB

Rhode Island requires commercial roofing contractors to pass a PSI-administered exam covering roofing systems, codes, safety, materials, estimating, and RI contractor regulations. A 10-hour OSHA safety course and $2M general liability insurance are also required.

Sample RI Roofing Contractor Practice Questions

Try these sample questions to test your RI Roofing Contractor exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1Which Rhode Island state agency oversees the licensing of commercial roofing contractors?

A.Rhode Island Department of Labor and Training

B.Rhode Island Contractors' Registration Board

C.Rhode Island Building Commission

D.Rhode Island Department of Business Regulation

Explanation: The Rhode Island Contractors' Registration Board (CRB) is responsible for licensing and regulating contractors in the state, including commercial roofing contractors. The CRB ensures contractors meet all requirements including insurance, bonding, and examination.

2What is the minimum general liability insurance requirement for a Rhode Island commercial roofing contractor?

A.$500,000

B.$1,000,000

C.$2,000,000

D.$5,000,000

Explanation: Rhode Island requires commercial roofing contractors to carry a minimum of $2,000,000 in general liability insurance. This requirement protects property owners and the public from potential damages during roofing operations.

3What OSHA training requirement must be completed before obtaining a Rhode Island commercial roofing license?

A.4-hour OSHA awareness course

B.8-hour OSHA construction course

C.10-hour OSHA safety course

D.30-hour OSHA construction course

Explanation: Rhode Island requires completion of a 10-hour OSHA safety course as a prerequisite for the commercial roofing contractor license. This course covers construction safety fundamentals including fall protection, electrical safety, and hazard recognition.

4What is the total cost to obtain a Rhode Island commercial roofing license including the exam fee and license fee?

A.$180

B.$400

C.$580

D.$750

Explanation: The total cost is $580, consisting of a $180 PSI exam fee plus a $400 license application fee to the Rhode Island Contractors' Registration Board. These fees do not include insurance or bonding costs.

5Which organization administers the Rhode Island commercial roofing contractor examination?

A.Prometric

B.Pearson VUE

C.PSI

D.ProvExam

Explanation: PSI administers the Rhode Island commercial roofing contractor examination. PSI is a national testing provider that delivers licensing exams for various trades and professions across multiple states.

6What is the primary purpose of a roof cricket (saddle) on a commercial building?

A.To increase the aesthetic appeal of the roof

B.To divert water away from chimneys and obstructions

C.To provide additional structural support for HVAC units

D.To create additional attic ventilation

Explanation: A roof cricket (also called a saddle) is a ridge structure built on the upslope side of a chimney or other roof obstruction to divert water around it. This prevents water pooling and ice dams that could lead to leaks and structural damage.

7What is the minimum slope typically required for an asphalt shingle roof according to the International Building Code (IBC)?

A.1:12

B.2:12

C.4:12

D.6:12

Explanation: The IBC requires a minimum slope of 2:12 for asphalt shingle roofs when using double-layer underlayment. Standard single-layer underlayment requires a minimum 4:12 slope. Below 2:12, asphalt shingles should not be used.

8Which single-ply roofing membrane is known for its superior chemical resistance and is commonly used near restaurants and areas with chemical exposure?

A.EPDM

B.TPO

C.PVC (polyvinyl chloride)

D.Modified bitumen

Explanation: PVC (polyvinyl chloride) membranes offer superior chemical resistance, making them ideal for roofs near restaurants (grease exhaust), chemical plants, and areas where oils, fats, and chemicals may contact the membrane. PVC resists degradation from these substances.

9At what height above a lower level does OSHA require fall protection for workers on commercial roofing projects?

A.4 feet

B.6 feet

C.8 feet

D.10 feet

Explanation: OSHA requires fall protection for construction workers, including roofers, at heights of 6 feet or more above a lower level (29 CFR 1926.501). This can include guardrails, safety nets, or personal fall arrest systems.

10What is the standard exposure for a three-tab asphalt shingle with a 12-inch height?

A.4 inches

B.5 inches

C.6 inches

D.7 inches

Explanation: The standard exposure for a three-tab asphalt shingle is 5 inches. With a 12-inch shingle height, the 5-inch exposure provides a 7-inch headlap, which ensures proper water shedding and wind resistance in a double-coverage installation.

About the RI Roofing Contractor Exam

The Rhode Island Commercial Roofing Contractor exam tests your knowledge of commercial roofing systems, installation methods, building codes, OSHA safety, materials and methods, estimating, Rhode Island contractor regulations, and business practices required for commercial roofing licensure.

Questions

100 scored questions

Time Limit

3 hours

Passing Score

70%

Exam Fee

$180 exam + $400 license (PSI (for Rhode Island Contractors' Registration Board))

RI Roofing Contractor Exam Content Outline

25%

Roofing Systems

Commercial low-slope and steep-slope roofing systems, single-ply membranes, BUR, modified bitumen, metal roofing

20%

Materials & Methods

TPO, EPDM, PVC membranes, asphalt shingles, metal panels, insulation, adhesives, mechanical fastening

15%

Building Codes

IBC/IRC roofing provisions, wind uplift, fire ratings, energy codes, Rhode Island amendments

15%

Safety & OSHA

Fall protection, scaffolding, hazard communication, ladder safety, 10-hour OSHA requirements

10%

Estimating & Plans

Roof area calculations, material takeoffs, blueprint reading, waste factors, bid preparation

10%

State Law

RI Contractors' Registration Board rules, permit requirements, lien law, insurance requirements, penalties

Business Practices

Contracts, $2M liability insurance, bonding, subcontractor management, warranty obligations

How to Pass the RI Roofing Contractor Exam

What You Need to Know

Passing score: 70%
Exam length: 100 questions
Time limit: 3 hours
Exam fee: $180 exam + $400 license

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

RI Roofing Contractor Study Tips from Top Performers

1Focus on commercial roofing systems — single-ply membranes (TPO, EPDM, PVC) and BUR make up the largest exam portion

2Know OSHA fall protection requirements thoroughly — Rhode Island requires a 10-hour OSHA course

3Study Rhode Island Contractors' Registration Board regulations including insurance minimums and permit rules

4Master roof area calculations, material waste factors, and commercial estimating formulas

5Review IBC commercial roofing code sections for wind uplift, fire ratings, and energy requirements

Frequently Asked Questions

What does the Rhode Island roofing contractor exam cover?

The RI commercial roofing exam covers commercial roofing systems (low-slope and steep-slope), materials and installation methods, building codes, OSHA safety, estimating, Rhode Island contractor regulations, and business practices.

What is the passing score for the Rhode Island roofing exam?

You must score at least 70% to pass the Rhode Island Commercial Roofing Contractor exam administered by PSI.

How much does the Rhode Island roofing contractor exam cost?

The exam fee is $180 paid to PSI. The license application fee is an additional $400 through the Rhode Island Contractors' Registration Board.

What are the prerequisites for a Rhode Island roofing license?

Rhode Island requires completion of a 10-hour OSHA safety course, $2M in general liability insurance, and passing the PSI-administered commercial roofing exam. Experience in commercial roofing is also required.