PracticeVideosBlogFlashcardsEspañol
All Practice Exams

293+ Free FL Roofing Contractor Practice Questions

Prepare for the Florida Certified Roofing Contractor (CCC) Exam exam with instant access — no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately
293+ Questions
100% Free

Loading practice questions...

Same family resources

Explore More Roofing Contractor License

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

Illinois Roofing Contractor

Practice QuestionsStudy Guide

California Roofing Contractor

Practice Questions1 blog

Arizona Roofing Contractor

Practice Questions1 blog

North Carolina Roofing Contractor

Practice Questions1 blog

Virginia Roofing Contractor

Practice Questions1 blog

Louisiana Roofing Contractor

Practice Questions

More From This Family

Videos and articles for deeper review.

ArticleFree Roofing Contractor Practice Test by State 2026: 1,900+ Questions22 min read
2026 Statistics

Key Facts: FL Roofing Contractor Exam

70%

Passing Score

CILB

Full bank

Practice Questions

OpenExamPrep

200 Q

Exam Questions (80 + 120)

CILB

11.5 hrs

Total Exam Time

CILB

4 years

Experience Required

CILB

Florida requires certified roofing contractors to pass a two-part exam. The trade portion covers built-up roofs, shingles, metal roofing, single-ply, tile, and safety. The business portion covers accounting, HR, and FL contractor law.

Sample FL Roofing Contractor Practice Questions

Try these sample questions to test your FL Roofing Contractor exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 293+ question experience with AI tutoring.

1Which Florida state agency oversees licensing for certified roofing contractors (CCC)?
A.Florida Department of Transportation
B.Department of Business and Professional Regulation (DBPR) through the Construction Industry Licensing Board (CILB)
C.Florida Department of Health
D.Florida Department of Revenue
Explanation: The Florida DBPR, through the Construction Industry Licensing Board (CILB), regulates and licenses certified roofing contractors (CCC). The CILB sets licensing requirements, administers examinations, and enforces contractor regulations statewide under Chapter 489, Florida Statutes.
2Under Florida Statute 489, what is the designation for a Certified Roofing Contractor license?
A.CGC
B.CCC
C.CBC
D.CRC
Explanation: CCC is the designation for a Florida Certified Roofing Contractor. CGC denotes Certified General Contractor, CBC denotes Certified Building Contractor, and CRC denotes Certified Residential Contractor; CRC is valid, but it is not the roofing classification.
3What is the minimum passing score required on each portion of the Florida CCC roofing contractor exam?
A.60%
B.65%
C.70%
D.75%
Explanation: Florida requires a minimum score of 70% on each portion of the CCC roofing contractor examination. The exam consists of a trade knowledge portion (80 questions, 5 hours) and a business knowledge portion (120 questions, 6.5 hours). Both must be passed independently.
4What is the difference between a Certified and a Registered roofing contractor in Florida?
A.Certified contractors can only work in one county
B.Registered contractors hold a statewide license
C.Certified contractors hold a statewide license; Registered contractors hold a local license
D.There is no difference; both are statewide
Explanation: In Florida, a Certified Roofing Contractor (CCC) holds a statewide license obtained by passing the state examination. A Registered contractor holds a local license based on a certificate of competency issued by a local jurisdiction. Only the Certified license allows work anywhere in the state.
5According to the Florida Building Code (FBC), what is the minimum roof slope for asphalt shingles?
A.1:12
B.2:12
C.4:12
D.6:12
Explanation: The Florida Building Code requires a minimum slope of 2:12 for asphalt shingles. At slopes between 2:12 and 4:12, a double layer of underlayment is typically required. Manufacturer specifications may further restrict installation on low-slope applications.
6In Florida's High-Velocity Hurricane Zone (HVHZ), which counties are included?
A.Miami-Dade, Broward, and Palm Beach Counties
B.Miami-Dade and Broward Counties only
C.All coastal counties from Key West to Jacksonville
D.Monroe, Miami-Dade, Broward, and Palm Beach Counties
Explanation: Florida's High-Velocity Hurricane Zone (HVHZ) includes only Miami-Dade and Broward Counties. These areas have the most stringent building code requirements in the state, including enhanced roofing specifications for wind resistance, impact testing, and installation methods under FBC Section 1523.
7What type of roofing system uses multiple layers of bitumen and reinforcing fabrics?
A.Single-ply membrane
B.Built-up roofing (BUR)
C.Metal standing seam
D.Concrete tile
Explanation: Built-up roofing (BUR) systems consist of multiple alternating layers of bitumen (asphalt or coal tar) and reinforcing fabrics (felts or ply sheets). This creates a continuous, sealed membrane. BUR systems are commonly used on low-slope commercial roofs and have been in use for over 100 years.
8What is the primary purpose of a roof cricket (saddle)?
A.To increase attic ventilation
B.To divert water away from chimneys and other roof penetrations
C.To add structural support to the ridge
D.To secure roof tiles during hurricanes
Explanation: A roof cricket, also called a saddle, is a small peaked structure built behind a chimney or other roof penetration to divert water and prevent ponding. The FBC requires crickets on the upslope side of chimneys wider than 30 inches to ensure proper drainage.
9Under the 8th Edition Florida Building Code, how must underlayment for an HVHZ reroof be selected?
A.Use 15-pound asphalt-saturated felt only
B.Use 30-pound asphalt-saturated felt only
C.Use an underlayment system permitted by FBC Section 1518.2 and the applicable product approval
D.Use any synthetic sheet, even if it is not listed or approved
Explanation: FBC Building Section 1518.2 provides multiple underlayment paths in the HVHZ, including qualifying felt, synthetic, taped-deck, and self-adhering systems depending on the roof covering and product approval. ASTM D1970 self-adhering sheet is an option, not a categorical requirement for every HVHZ reroof.
10What is the OSHA fall protection height trigger for roofing work on low-slope roofs?
A.4 feet
B.6 feet
C.10 feet
D.15 feet
Explanation: OSHA requires fall protection for workers on low-slope roofs (4:12 or less) at heights of 6 feet or more above a lower level. For low-slope roofs, acceptable fall protection methods include guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning lines and safety monitors.

About the FL Roofing Contractor Exam

The Florida CCC roofing contractor exam has two parts: an 80-question trade exam covering roofing systems, materials, safety, and building codes, plus a 120-question business exam covering accounting, HR, government regulations, and business administration.

Questions

200 scored questions

Time Limit

11.5 hours (5 hrs trade + 6.5 hrs business)

Passing Score

70%

Exam Fee

Confirm current fees during Pearson VUE registration (Pearson VUE / Florida CILB)

FL Roofing Contractor Exam Content Outline

Separate exam

Business & Finance

A separate 120-question exam covering accounting, business administration, project management, contracts, liens, insurance, and Florida contractor law

15%

Built-Up Roofs

Deck preparation, insulation, felts, surfacing, flashing, tie-ins, test cuts, maintenance, and repair

15%

Shingles & Shakes

Materials, exposures, layouts, valleys, ridges, flashing, underlayment, ventilation, fastening, maintenance, and repair

10%

Architectural Metal Roofs

Metal roof and shingle installation, fasteners, sealants, underlayment, flashing, ventilation, tie-ins, maintenance, and repair

15%

Single-Ply Systems

Adhered, heat-applied, and mechanically fastened systems; seams, insulation, flashing, tie-ins, maintenance, and repair

15%

Modified Roofing Systems

APP, SBS, and self-adhered systems; adhesives, heat application, insulation, ventilation, flashing, and repair

10%

Concrete & Clay Tile Roofs

Loads, layout, drainage, underlayment, fastening, foam and mortar, flashing, ventilation, tie-ins, maintenance, and repair

5%

Membrane Waterproofing

Below-grade walls and floor slabs, primers, membrane types, hydrostatic pressure, and hot or cold application

5%

Drains & Gutters

Scuppers, gutters, downspouts, conductor heads, water-flow rates, sizing, fastening, and sealants

10%

Equipment & Safety

Ladders, scaffolds, hoists, lifts, kettles, welding equipment, roof jacks, compressors, pneumatic tools, and fall protection

How to Pass the FL Roofing Contractor Exam

What You Need to Know

  • Passing score: 70%
  • Exam length: 200 questions
  • Time limit: 11.5 hours (5 hrs trade + 6.5 hrs business)
  • Exam fee: Confirm current fees during Pearson VUE registration

Keys to Passing

  • Complete 500+ practice questions
  • Score 80%+ consistently before scheduling
  • Focus on highest-weighted sections
  • Use our AI tutor for tough concepts

FL Roofing Contractor Study Tips from Top Performers

1Master the Florida Building Code roofing sections, especially HVHZ requirements (Section 1523)
2Know FL Statute 489 — licensing, penalties, contracts, and continuing education requirements
3Study mechanics lien law (F.S. 713) — deadlines for Notice to Owner and Claim of Lien
4Learn roofing system types: BUR, modified bitumen, single-ply, tile, metal, shingles
5Review OSHA fall protection rules for both low-slope and steep-slope roofing

Frequently Asked Questions

What does the Florida CCC roofing contractor exam cover?

The FL CCC exam has two parts: an 80-question trade exam (5 hours) covering roofing systems, materials, FBC codes, and safety, plus a 120-question business exam (6.5 hours) covering accounting, HR, and government regulations.

What is the passing score for the FL roofing contractor exam?

A minimum score of 70% is required on each portion (trade and business) of the Florida CCC roofing contractor exam.

Is the Florida CCC roofing exam open-book?

Yes, the Florida CCC roofing contractor exam is open-book and computer-based. Candidates may bring approved reference materials to the testing center.

What experience is needed for a Florida roofing contractor license?

Florida typically requires 4 years of verifiable roofing experience or a combination of education and experience before applying for the CCC license.