All Practice Exams

Free Practice Questions for AZ Roofing Contractor

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
120+ Questions
100% Free

Loading practice questions...

Exam Review

Key Facts: AZ Roofing Contractor Exam

70%

Passing Score

AZ ROC / PSI

120 Q

Practice Questions

OpenExamPrep

2 hrs

Exam Time

PSI

50 Q

Exam Questions

PSI

$66

Exam Fee

PSI

Arizona requires roofing contractors to pass the CR-42 trade exam. The exam covers roof system installation, BUR, waterproofing, estimating, components, safety, and repair methods specific to Arizona construction standards.

Sample AZ Roofing Contractor Practice Questions

Try these sample questions to review concepts for the AZ Roofing Contractor exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 120+ question experience with AI tutoring.

1Which agency oversees roofing contractor licensing in Arizona?
A.Arizona Department of Commerce
B.Arizona Registrar of Contractors (AZ ROC)
C.Arizona Department of Labor
D.Arizona Building Safety Division
Explanation: The Arizona Registrar of Contractors (AZ ROC) oversees all contractor licensing in Arizona, including the CR-42 roofing classification. The ROC issues licenses, investigates complaints, and enforces contractor licensing laws under A.R.S. Title 32, Chapter 10.
2What is the Arizona roofing contractor license classification code?
A.CR-40
B.CR-42
C.CR-44
D.CR-46
Explanation: The CR-42 classification is the Arizona Registrar of Contractors designation for roofing contractors. This license authorizes installation, repair, and maintenance of all roofing systems on residential and commercial structures.
3How many years of experience are required to qualify for an Arizona CR-42 roofing license?
A.2 years
B.3 years
C.4 years
D.5 years
Explanation: Arizona requires 4 years of verifiable roofing experience to qualify for the CR-42 roofing contractor license. This experience must be documented and may include a combination of journeyman work and supervisory roles.
4What is the minimum passing score for the Arizona CR-42 roofing trade exam?
A.60%
B.65%
C.70%
D.75%
Explanation: A minimum score of 70% is required to pass the Arizona CR-42 roofing contractor trade exam. The exam consists of 50 trade-specific questions with a 120-minute time limit.
5Which testing administrator delivers the Arizona CR-42 roofing exam?
A.Prometric
B.Pearson VUE
C.PSI
D.NASCLA
Explanation: PSI administers the Arizona CR-42 roofing contractor trade exam on behalf of the Arizona Registrar of Contractors. Candidates schedule their exam through PSI's testing centers or online scheduling system.
6What is the primary purpose of roof decking?
A.To provide insulation
B.To serve as the structural base for roofing materials
C.To act as a vapor barrier
D.To channel water to drains
Explanation: Roof decking serves as the structural base or substrate to which roofing materials are attached. It transfers the weight of roofing materials and environmental loads to the structural framing. Common decking materials include plywood, OSB, and concrete.
7What minimum roof slope is typically considered 'steep-slope' roofing?
A.2:12
B.3:12
C.4:12
D.6:12
Explanation: A slope of 3:12 (3 inches of rise per 12 inches of horizontal run) or greater is generally classified as steep-slope roofing. Slopes below 3:12 are considered low-slope. This classification determines which roofing materials and methods are appropriate.
8Which roofing material is most commonly used on steep-slope residential roofs in Arizona?
A.Built-up roofing
B.TPO membrane
C.Concrete tile or asphalt shingles
D.EPDM rubber
Explanation: Concrete tile and asphalt shingles are the most common steep-slope residential roofing materials in Arizona. Concrete tile is especially popular due to its durability in extreme heat and its fire resistance, while asphalt shingles offer cost-effectiveness.
9What does BUR stand for in roofing terminology?
A.Building Under Repair
B.Built-Up Roofing
C.Base Underlayment Roof
D.Bitumen Utility Reinforcement
Explanation: BUR stands for Built-Up Roofing, a time-tested low-slope roofing system consisting of alternating layers of bitumen (asphalt or coal tar) and reinforcing fabrics (felts). BUR systems are finished with a flood coat and aggregate or a cap sheet.
10What is the primary function of roof flashing?
A.To add aesthetic appeal
B.To prevent water infiltration at joints and transitions
C.To provide structural support
D.To increase insulation value
Explanation: Flashing prevents water infiltration at vulnerable joints, transitions, and penetrations in the roof system. It is installed at areas such as valleys, chimneys, walls, vents, and roof edges where different surfaces meet and water could otherwise penetrate.

About the AZ Roofing Contractor Exam

The Arizona CR-42 Roofing contractor trade exam covers estimating and plan reading, surface preparation, steep-slope and low-slope roofing including built-up roofing and waterproofing, roofing components, safety regulations, and repairs and reroofing.

Exam sponsor: PSI (for Arizona Registrar of Contractors). The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Questions

50 questions

Time Limit

2 hours

Passing Score

70%

Exam / Certification Fees

$66

Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

40%

Steep/Low Slope Roofing, BUR & Waterproofing

Built-up roofing, single-ply, modified bitumen, steep-slope shingles, tile, metal, waterproofing membranes

20%

Roofing Components

Flashing, vents, drains, underlayment, vapor barriers, insulation, fasteners

12%

Safety

Fall protection, OSHA roofing standards, hot-work safety, hazard communication

10%

Estimating & Plan Reading

Blueprint reading, material takeoffs, roof area calculations, specifications

10%

Surface Preparation

Deck inspection, substrate requirements, moisture testing, tear-off procedures

8%

Repairs & Reroofing

Leak diagnosis, overlay vs. tear-off, patch repairs, reroofing code requirements

Preparing for the AZ Roofing Contractor Exam

What You Need to Know

  • Passing score: 70%
  • Exam length: 50 questions
  • Time limit: 2 hours
  • Exam / certification fees: $66 Official sources

Using Our Practice Resources

  • Work through all 120 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

AZ Roofing Contractor: Suggested Study Strategy

1Focus on steep-slope and low-slope roofing systems — they make up the largest portion of the exam
2Master built-up roofing (BUR) application methods, materials, and layering sequences
3Know roofing component functions: flashing types, underlayment, drainage, and fasteners
4Study OSHA fall protection standards for roofing work at various heights
5Practice roof area calculations and material takeoff estimation

Frequently Asked Questions

What does the Arizona CR-42 roofing exam cover?

The AZ CR-42 exam covers steep-slope and low-slope roofing, built-up roofing, waterproofing, roofing components, estimating and plan reading, surface preparation, safety, and repairs and reroofing.

What is the passing score for the AZ CR-42 roofing exam?

A minimum score of 70% is required to pass the Arizona CR-42 roofing contractor trade exam.

How many questions are on the AZ roofing contractor exam?

The Arizona CR-42 roofing trade exam has 50 questions with a 2-hour time limit.

What experience is needed for an Arizona roofing contractor license?

Arizona requires the qualifying party to document four years of practical or management roofing trade experience, at least two of which must fall within the last ten years (A.R.S. § 32-1122(E)).