100+ Free MS Roofing Contractor Practice Questions

Pass your Mississippi Roofing, Sheet Metal & Siding Contractor Exam exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

55% Pass Rate

100+ Questions

100% Free

1 / 100

Question 1

Score: 0/0

According to OSHA, what training must workers receive before operating a propane-heated roofing kettle?

Training on safe operation, fire prevention, emergency procedures, and hazards of the specific equipment

Written instructions are sufficient without hands-on training

Only how to light the burner

No specific training is required

to track

Same family resources

Explore More Roofing Contractor License

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

North Carolina Roofing Contractor

Practice Questions100 questions

1 blog

More From This Family

Videos and articles for deeper review.

ArticleFree Roofing Contractor Practice Test by State 2026: 1,900+ Questions22 min read

2026 Statistics

Key Facts: MS Roofing Contractor Exam

70%

Passing Score

PSI

100 Q

Practice Questions

OpenExamPrep

2 hrs

Exam Time

PSI

$75

Exam Fee

PSI

60 Q

Exam Questions

PSI

Mississippi requires roofing contractors to pass a 60-question trade exam and a separate Business & Law exam, both administered by PSI. The trade exam is open-book and covers safety, roofing systems, repairs, elastomeric coatings, and built-up roofing.

Sample MS Roofing Contractor Practice Questions

Try these sample questions to test your MS Roofing Contractor exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1According to OSHA, what is the minimum height at which fall protection is required for residential roofing work?

A.6 feet

B.4 feet

C.10 feet

D.8 feet

Explanation: OSHA's construction industry standard (29 CFR 1926 Subpart M) requires fall protection for all residential construction activities, including roofing, when workers are at heights of 6 feet or more above a lower level.

2What is the passing score required for the Mississippi Roofing, Sheet Metal, and Siding Contractor trade exam?

A.70%

B.75%

C.80%

D.65%

Explanation: The Mississippi Roofing, Sheet Metal, and Siding Contractor trade exam requires a minimum passing score of 70%. The exam consists of 60 trade-specific questions and candidates have 120 minutes to complete it.

3What testing service administers the Mississippi roofing contractor exam?

A.PSI

B.Prometric

C.Pearson VUE

D.The State Board of Contractors directly

Explanation: PSI (now part of Scantron) administers the Mississippi Roofing, Sheet Metal, and Siding Contractor exam. Candidates schedule and take the exam through PSI testing centers.

4What is the primary function of roofing substrate (roof deck)?

A.To provide a structural base for the roofing system and support all applied loads

B.To act as the primary waterproofing layer

C.To provide thermal insulation for the building

D.To serve as the finished interior ceiling

Explanation: The roofing substrate (deck) serves as the structural base that supports the entire roofing system and all applied loads including wind, snow, workers, and equipment. It transfers these loads to the supporting framing structure below.

5For the Mississippi roofing contractor exam, what format is the trade portion of the test?

A.60 multiple-choice questions with a 120-minute time limit

B.100 multiple-choice questions with a 3-hour time limit

C.50 multiple-choice questions with a 90-minute time limit

D.75 questions with a 2-hour time limit

Explanation: The Mississippi Roofing, Sheet Metal, and Siding Contractor trade exam consists of 60 multiple-choice questions with a 120-minute (2-hour) time limit. The exam is open-book.

6What is the minimum slope recommended for built-up bituminous roofing systems?

A.1/4 inch per foot (1/4:12)

B.1 inch per foot (1:12)

C.2 inches per foot (2:12)

D.Completely flat (0:12)

Explanation: Built-up bituminous roofing systems are designed for low-slope applications with a minimum recommended slope of 1/4 inch per foot (1/4:12). This minimal slope promotes positive drainage while utilizing the waterproof membrane characteristics of the BUR system.

7What type of roofing coating is classified as 'elastomeric'?

A.A flexible, rubber-like coating that stretches and returns to its original shape

B.A rigid coating that hardens over time

C.A gravel-surfaced coating applied with hot bitumen

D.A metallic reflective paint

Explanation: Elastomeric coatings are flexible, rubber-like materials that can stretch to accommodate building movement and thermal expansion, then return to their original shape. They provide waterproof protection and high reflectivity, making them popular for low-slope roofs in Mississippi's hot climate.

8According to OSHA, what is the required guardrail height for a roofing work platform?

A.42 inches (plus or minus 3 inches)

B.36 inches

C.48 inches

D.30 inches

Explanation: OSHA requires guardrails to be 42 inches in height, plus or minus 3 inches, measured from the walking/working surface. This height provides effective fall protection while allowing workers to move and work comfortably.

9What is the standard application rate for hot-applied asphalt in a built-up roofing system between plies?

A.25 pounds per 100 square feet (per square)

B.10 pounds per square

C.50 pounds per square

D.5 pounds per square

Explanation: The standard interply mopping rate for hot-applied asphalt in a built-up roof system is approximately 25 pounds per 100 square feet (per square). This rate provides adequate bonding between plies while maintaining waterproof integrity.

10Under Mississippi State Board of Contractors regulations, what is the exam fee for the roofing contractor trade exam?

A.$75

B.$50

C.$100

D.$150

Explanation: The Mississippi Roofing, Sheet Metal, and Siding Contractor trade exam fee is $75, paid to PSI when scheduling the examination. This is per attempt; re-examination requires an additional fee.

About the MS Roofing Contractor Exam

The Mississippi Roofing, Sheet Metal, and Siding Contractor exam tests your knowledge of roofing safety, substrate preparation, steep-slope roofing, roofing repairs, elastomeric coatings, built-up bituminous roofing, and Mississippi contractor business and law requirements.

Questions

60 scored questions

Time Limit

2 hours

Passing Score

70%

Exam Fee

$75 (PSI / Mississippi State Board of Contractors)

MS Roofing Contractor Exam Content Outline

20%

Roofing Systems

Steep-slope roofing, substrate requirements, built-up bituminous roofing, elastomeric systems, drainage

20%

Materials & Methods

Elastomeric coatings, hot asphalt application, modified bitumen, BUR components, surface preparation

15%

Safety & OSHA

Fall protection, scaffolding, hot process safety, PPE, fire prevention, hazard communication

15%

Building Codes

IRC roofing provisions, fire ratings, wind uplift, reroofing requirements, slope requirements

15%

State Law & Licensing

Mississippi contractor licensing, lien law, Board of Contractors regulations, exam requirements

10%

Estimating & Plans

Area calculations, slope factors, material takeoffs, cost components, unit pricing, bid preparation

Business Practices

Contracts, bonding, change orders, workers' compensation, project management, tax obligations

How to Pass the MS Roofing Contractor Exam

What You Need to Know

Passing score: 70%
Exam length: 60 questions
Time limit: 2 hours
Exam fee: $75

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

MS Roofing Contractor Study Tips from Top Performers

1Focus on built-up bituminous roofing details — ply composition, hot asphalt application temperatures, aggregate surfacing, and repair methods

2Study elastomeric coating systems including surface preparation, application methods, cure times, and minimum film thickness

3Know OSHA requirements for hot process safety, fall protection, scaffolding, and PPE when working with hot asphalt

4Review Mississippi State Board of Contractors licensing requirements, lien law deadlines, and contract obligations

5Practice roof area calculations with slope factors and understand the difference between direct and indirect costs in estimating

Frequently Asked Questions

What does the Mississippi roofing contractor exam cover?

The MS roofing trade exam covers safety, roofing substrate, steep-slope roofing, roofing repairs, elastomeric coatings, and built-up bituminous roofing. A separate Business & Law exam covers licensing, estimating, lien law, financial management, tax, labor laws, project management, and contracts.

What is the passing score for the Mississippi roofing exam?

You must score at least 70% (42 out of 60 correct) on the trade exam. The exam is open-book, meaning you can use approved reference materials during testing.

How much does the Mississippi roofing contractor exam cost?

The exam fee is $75 per attempt, paid to PSI when scheduling. Additional fees apply for the license application through the Mississippi State Board of Contractors.

Is the Mississippi roofing exam open-book?

Yes, the Mississippi roofing contractor exam is open-book. Candidates may use approved reference materials during the test. Only materials approved by the testing program are permitted — personal notes and electronic devices are not allowed.