PracticeVideosBlogFlashcards
All Practice Exams

Free Practice Questions for FL Plumber

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
495+ Questions
100% Free
Exam Review

Key Facts: FL Plumber Exam

Local authority

Journeyman Licensing

FS 489.1455 and local licensing authority

75% after Oct 1, 1997

Approved Proctored Recognition Route

FS 489.1455(1)(a); other conditions apply

80 / 3 hours

Brevard Example Only

Prov Brevard Journeyman Plumber panel

$90

Brevard Exam Fee

Prov Brevard; separate local charges may apply

2020 FPC

Brevard Exam Reference

Prov Brevard; not a statewide field-code statement

First identify your city/county licence and accepted examination. As one current local example, Prov’s Brevard Journeyman Plumber page lists 80 questions, 180 minutes, $90 and 75%, with 2020 Florida Plumbing Code and Plumbing Basics for Contractors, 3rd edition. The exam’s listed book edition is distinct from the code governing a current construction project. FS 489.1455 separately sets conditions for statewide recognition of qualifying local journeymen.

Sample FL Plumber Practice Questions

Try these sample questions to review concepts for the FL Plumber exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 495+ question experience with AI tutoring.

1A building drain carries 40 DFU, including three private water closets, at 1/4 inch per foot. Under 2023 FBC–Plumbing Table 710.1(1), a 3-inch building drain carries 42 DFU at this slope; drains serving water closets must be at least 3 inches. Which conclusion follows?
A.A 2-inch drain is adequate because each water closet flushes only 1.6 gallons
B.A 3-inch drain is prohibited whenever a third water closet is added
C.A 3-inch drain satisfies these load and minimum-diameter checks
D.A 4-inch drain is required because 40 DFU exceeds the 3-inch horizontal-branch limit
Explanation: The building-drain table permits 42 DFU on a 3-inch drain at 1/4 inch per foot. The 40-DFU load is within that capacity and the 3-inch water-closet minimum is met. Table 710.1(1) does not impose the claimed two-water-closet limit. A horizontal branch is a different sizing application.
2The plan below places the building sewer west of the fixtures. North is up, and the arrow is labeled as drainage flow. Which drawing correction is needed? ```text NORTH ^ WEST EAST sewer <--- junction fixtures flow ---> ```
A.Reverse the north arrow while retaining the drainage arrow
B.Reverse the mislabeled east-pointing drainage arrow toward the west sewer
C.Retain the east-pointing arrow as the downstream viewing direction
D.Reverse the east/west labels while retaining the north arrow
Explanation: The sewer lies west, so the drainage arrow toward it must point west. Projection or a north label does not reverse the actual flow route. Correct the conflicting annotation before layout.
3A 48-foot horizontal run of 3-inch sanitary drainage pipe has 5 inches of available fall. No special engineered design applies. What is the smallest additional fall needed to meet Table 704.1 of the 2023 FBC–Plumbing?
A.0 inches
B.1 inch
C.7 inches
D.19 inches
Explanation: The minimum slope for 3- through 6-inch horizontal drainage piping is 1/8 inch per foot. Required fall is 48 × 1/8 = 6 inches, so the available 5 inches is short by 1 inch. This slope is approximately 1.04 percent, not exactly 1 percent.
4Using 2023 FBC–Plumbing Table 709.1, what drainage fixture unit value applies to one private-use, 1.6-gpf gravity-tank water closet when rated individually?
A.2 DFU
B.3 DFU
C.4 DFU
D.6 DFU
Explanation: Table 709.1 assigns 3 DFU to a private-use 1.6-gpf water closet. The question specifies a gravity tank: a flushometer-tank water closet has its own 4-DFU row, whether public or private.
5A Florida journeyman plans to operate a business contracting for plumbing projects in jurisdictions throughout the state. Which credential has statewide contracting authority under section 489.105, Florida Statutes, subject to the applicable licensing and business requirements?
A.A journeyman license issued by one Florida county
B.A DBPR certified plumbing contractor credential
C.A DBPR registered contractor credential for only one local jurisdiction
D.A local plumbing apprentice registration
Explanation: Section 489.105(8) distinguishes a certified contractor, who may contract throughout Florida, from a registered contractor whose authority is limited to the jurisdictions for which registration is issued. Local journeyman recognition is not conversion to a contractor credential.
6A candidate has a county authorization for a local journeyman plumbing test. A search also finds a DBPR certified plumbing contractor reference list. Before choosing books, which comparison is essential?
A.Use the contractor list whenever it contains a newer code edition
B.Use the edition on the newest practice-book cover regardless of test code
C.Match the county authorization, provider test code and current approved reference list
D.Combine all editions because open-book tests accept any published code
Explanation: Florida local journeyman testing and DBPR contractor testing are different credentials. Match the authorized jurisdiction and provider test code to that examination’s current reference list and rules. A code adopted for field construction is not automatically the edition approved for every local examination.
7Three proposed potable connections are reviewed. A is a continuously pressurized health-hazard chemical process capable of backpressure; B is a private well cross-connected to the public potable system; C is chemical-free irrigation with an AVB upstream of zone shutoff valves. Which complete correction set follows Chapter 6?
A.A: double check; B: retain with RP; C: retain AVB and downstream valves
B.A: RP; B: retain with RP; C: correct the AVB/valve conflict
C.A: RP; B: remove cross-connection; C: retain AVB and downstream valves
D.A: RP; B: remove cross-connection; C: correct the AVB/valve conflict
Explanation: A needs protection suitable for health hazard, continuous pressure and backpressure. B is a prohibited private/public potable cross-connection, not a connection legalized merely by an RP. C conflicts with the AVB downstream-valve restriction. Each line requires its own hazard and installation analysis.
8For an ordinary fixture trap without an approved special deeper-seal design, what is the minimum liquid seal depth under 2023 FBC–Plumbing section 1002.4?
A.1 inch
B.2 inches
C.3 inches
D.4 inches
Explanation: Section 1002.4 specifies a liquid trap seal from 2 through 4 inches for the ordinary case. A special deeper seal requires approval and the required access; it does not change the ordinary minimum.
9A building’s ordinary fixture distribution system measures 94 psi with all outlets closed. No exception applies. Under 2023 FBC–Plumbing section 604.8, to what maximum static pressure must an approved pressure regulator reduce the supply?
A.60 psi
B.80 psi
C.100 psi
D.125 psi
Explanation: Where static pressure exceeds 80 psi, section 604.8 requires an approved pressure-reducing valve with strainer to reduce pressure in the distribution piping to 80 psi or less. Static pressure is measured without flow; it is not the residual pressure during demand.
10The drawing legend defines solid lines as drainage and dashed lines as dry vent piping. A lavatory discharges through a solid segment that also provides an approved wet vent for a downstream fixture. Which notation makes that segment unambiguous?
A.Change it to dashed line and delete its drainage load
B.Keep it solid and label its wet-vent function, size and connected fixtures
C.Show the segment as dashed dry vent but retain its connected drainage load
D.Keep it solid but mark wet vent only on the upstream dry-vent riser
Explanation: A wet-vented segment conveys drainage while also providing a venting path under the applicable arrangement. Following the supplied legend, retain its drainage depiction and identify the dual function and connections. Line styles are drawing-specific, not a universal rule that all venting paths must be dashed.

About the FL Plumber Exam

Florida journeyman plumber licensing is a local city/county pathway with jurisdiction-specific eligibility, test codes, formats, and reference editions. Prov administers participating local examinations. This resource prepares general plumbing trade skills and does not represent the Florida DBPR certified plumbing contractor examination.

Exam sponsor: Local Florida city/county licensing authority and its approved testing provider. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Assessment

Question count not published by the exam provider

Time Limit

Varies by local jurisdiction

Passing Score

For the recognition route in FS 489.1455(1)(a), an approved proctored exam taken after October 1, 1997 requires at least 75%. Confirm your local licensing pathway.

Exam / Certification Fees

Varies locally; Prov’s Brevard Journeyman Plumber listing is $90, excluding separate local charges.

Exam sponsor website

Reported exam pass rate: Not published. No single statewide first-time journeyman pass rate is published in the cited local licensing bulletins. Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Official sources

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

Editorial study topic; local exam outlines vary

Drainage & Waste Systems

Drain sizing, DFU calculations, slope requirements, cleanouts, and Florida-specific building sewer requirements

Editorial study topic; local exam outlines vary

Water Supply & Distribution

Pipe sizing, WSFU, backflow prevention, water heaters, pressure regulation, and reclaimed water systems

Editorial study topic; local exam outlines vary

Venting & Plan Reading

Vent systems and plumbing diagram interpretation as required by the local exam.

Editorial study topic; local exam outlines vary

Plumbing Math & Special Systems

Sizing calculations, storm drainage, and special systems within the local exam’s scope; gas is a separate or combined exam where specified.

Editorial study topic; local exam outlines vary

Fixtures, Safety & Local Requirements

Fixture installation, trade safety, and local examination/licensing requirements.

Preparing for the FL Plumber Exam

What You Need to Know

  • Passing score: For the recognition route in FS 489.1455(1)(a), an approved proctored exam taken after October 1, 1997 requires at least 75%. Confirm your local licensing pathway.
  • Assessment: Question count not published by the exam provider
  • Time limit: Varies by local jurisdiction
  • Exam / certification fees: Varies locally; Prov’s Brevard Journeyman Plumber listing is $90, excluding separate local charges. Official sources

Using Our Practice Resources

  • Work through all 495 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

FL Plumber: Suggested Study Strategy

1Get the current bulletin for your city/county, license title, and exact exam code before choosing study materials.
2Practice DFU, water-supply, and pipe-sizing calculations using the code edition required by your local exam.
3Review drainage, venting, fixtures, water heaters, storm drainage, and safety within the local outline.
4Practice plan and isometric reading where the local bulletin includes them.
5For Prov exams, bring only authorized references prepared according to its rules; preparation guides and practice tests are not approved exam-room references.
6Set practice timing from the local exam description and verify the passing standard with the licensing authority.

Frequently Asked Questions

Is this the Florida DBPR plumbing contractor examination?

No. This page concerns local journeyman plumber licensing. The DBPR certified contractor pathway has separate business and trade requirements; its exam weights and drawing sessions must not be applied to every local journeyman test.

What format can a local journeyman test use?

Prov’s current Brevard example has 80 questions, 180 minutes, open-book computer delivery, a $90 fee and 75% passing. Other local programs may use a different outline or reference edition; confirm your exact exam before registering.

Does it include isometrics or plan reading?

Brevard’s published outline includes 10 of 80 questions in Isometrics & Plan Reading. That does not establish a compulsory contractor-style five-drawing practical for all journeymen. Follow the local outline.

Which code book should I bring?

Use the exact authorized references for your exam. The Brevard listing names 2020 Florida Building Code—Plumbing and Plumbing Basics for Contractors, 3rd edition. A current field-code edition and an exam reference edition can differ.

Does Florida law specify a passing score?

FS 489.1455(1)(a) requires at least 75% on an approved proctored examination taken after October 1, 1997 for its journeyman-recognition route. That route also has training and coursework conditions; it is not a universal description of every local application.

What are the retest rules and fees?

The Brevard Prov page lists a $90 examination fee and requires new licensing-authority approval for each attempt. It states no waiting period beyond appointment availability. Local application/licence charges and other jurisdictions’ rules are separate.