100+ Free Murersvendeprøven Practice Questions

Prepare for the Murer Svendeprøve (Bricklayer Journeyman) (Denmark) exam with instant access — no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

100+ Questions

100% Free

Loading practice questions...

Same family resources

Explore More Danish Trades Journeyman Examinations (Svendeprøver)

Continue into nearby exams from the same family. Each card keeps practice questions, study guides, flashcards, videos, and articles in one place.

2026 Statistics

Key Facts: Murersvendeprøven Exam

Level 4

Qualification level in the Danish Qualifications Framework

BEK nr. 154 af 29/01/2026

228×108×54

Standard Danish brick dimensions in millimeters

Dansk Standard DS/EN 771-1

66.7 mm

Vertical course height including standard mortar joint (15 per meter)

Byggeriets Uddannelser

Grade 02

Minimum passing grade required in both theory and practical exams

BEK nr. 154/2026

3.5 to 4 yrs

Duration of the dual vocational education program

UddannelsesGuiden

Byggeriets Uddannelser's Murer svendeprøve is a comprehensive practical and theoretical assessment evaluating brick bonds, mortar technology, arch construction, cavity wall physics, and wet-room tiling.

Sample Murersvendeprøven Practice Questions

Try these sample questions to test your Murersvendeprøven exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 100+ question experience with AI tutoring.

1According to Danish standard DS/EN 771-1 and national masonry conventions, what are the standard nominal dimensions of a Danish brick (dansk normalsten)?

A.240 × 115 × 71 mm

B.228 × 108 × 54 mm

C.210 × 100 × 50 mm

D.250 × 120 × 65 mm

Explanation: The standard Danish brick (normalsten) measures 228 mm in length, 108 mm in width, and 54 mm in height. Together with standard 12 mm mortar joints, this establishes the 240 × 120 × 66.7 mm module used throughout Danish construction.

2What is the standard nominal thickness of both bed joints (liggefuger) and head joints (studsfuger) in traditional Danish brickwork?

A.8 mm

B.10 mm

C.12 mm

D.15 mm

Explanation: In standard Danish masonry, nominal bed and head joints are 12 mm thick. Adding 12 mm to brick dimensions creates the standard 120 mm module width (108 + 12 mm) and 240 mm module length (228 + 12 mm).

3In Danish bricklaying, how many vertical courses (skifter) correspond exactly to 1.0 meter in the standard modular height system (skiftegang)?

A.12 courses

B.13.5 courses

C.15 courses

D.16 courses

Explanation: The Danish vertical modular course height is 66.7 mm (54 mm brick + 12 mm bed joint). Exactly 15 courses make up 1,000 mm (15 × 66.67 mm = 1,000 mm), and 3 courses equal 200 mm.

4A bricklayer is setting out a wall height that requires exactly 27 courses (skifter) in standard Danish skiftegang. What is the total nominal height of the masonry?

A.1,620 mm

B.1,750 mm

C.1,800 mm

D.1,890 mm

Explanation: With 15 courses per 1,000 mm, each course is 66.67 mm. Therefore, 27 courses equal 27 × 66.67 mm = 1,800 mm (alternatively calculated as 1.8 × 15 courses = 27 courses, giving exactly 1.80 m).

5What is the defining arrangement of bricks within each course in a traditional Danish munkeforbandt (monk bond)?

A.Alternating courses of stretchers and headers throughout the entire wall

B.Two stretchers (løbere) followed by one header (binder/kop) repeatedly in the same course

C.One stretcher followed by one header continuously in the same course

D.Three stretchers followed by two headers in alternating courses

Explanation: Munkeforbandt (monk bond) is characterized by repeating two stretchers (løbere) followed by one header (binder) in every course. In consecutive courses, the headers are centered over the joint between the two stretchers below.

6In Danish krydsforbandt (cross bond), what cut brick must be placed at the corner in stretcher courses to create the characteristic staggered cross pattern?

A.A petring (quarter bat) next to a whole brick

B.A trekvartsten (three-quarter bat) of 168 mm starting every stretcher course

C.A klever (longitudinally split brick) along the entire corner

D.A halvsten (half bat) placed every third course

Explanation: In krydsforbandt, every stretcher course starts at the corner with a trekvartsten (three-quarter bat measuring 168 mm). Alternating stretcher courses then insert a header next to the corner bat every fourth course to shift vertical joints by 1/2 brick, forming the cross pattern.

7What is the standard cut length of a Danish trekvartsten (three-quarter bat) derived from a 228 mm normalsten?

A.150 mm

B.168 mm

C.171 mm

D.180 mm

Explanation: A Danish trekvartsten is created by subtracting 60 mm (half a module) from the 228 mm normalsten, giving exactly 168 mm (228 - 60 = 168 mm). This cut coordinates perfectly with the 120 mm module grid.

8A bricklayer must set out a brick pier between two external corners (pillemål) spanning 5 modules (M = 120 mm). What is the exact setting-out dimension?

A.588 mm

B.600 mm

C.612 mm

D.624 mm

Explanation: In Danish modular masonry, a pillemål (external corner to external corner) is calculated as: Length = (n × 120 mm) - 12 mm. For 5 modules, this is (5 × 120 mm) - 12 mm = 600 - 12 = 588 mm.

9Why does the calculation of a Danish pillemål (pier length between external corners) require subtracting one mortar joint (12 mm) from the modular multiples?

A.To compensate for brick thermal expansion over time

B.Because external corners terminate at the brick face without an exterior joint, leaving one joint fewer than modules

C.To allow tolerance for plaster application on external surfaces

D.Because corner bricks are manufactured 12 mm shorter than field bricks

Explanation: Each module consists of one brick unit plus one mortar joint (e.g., 108 mm + 12 mm = 120 mm). Because an isolated pier terminates with brick faces on both outer ends, the final joint is omitted, requiring n × 120 mm - 12 mm.

10What is a petring in traditional Danish brickwork terminology?

A.A header brick split along its center line

B.A quarter bat cut to approximately 48 mm in length

C.A brick fired to high vitrification for damp-proof courses

D.A specialized wedge-shaped brick used in arch construction

Explanation: A petring is a quarter bat measuring approximately 48 mm in length (108 mm half-bat minus 60 mm modular cut). It is traditionally used to close bonds or adjust alignment near openings and piers.

About the Murersvendeprøven Exam

Murersvendeprøven is the Level 4 concluding assessment for Denmark's murer EUD, governed for new entrants by BEK nr. 154/2026 with transition rules for earlier cohorts. The official scope includes sustainable construction, safety, construction technology and energy, roofs, tile and masonry techniques, joints, flooring, rendering and surface treatment, repair, renovation, restoration, and digital drawing. The H5 assessment combines a case and oral examination with a 50-hour practical production task. This English MCQ bank supports technical reasoning and calculations but cannot reproduce the official case, oral defense, or craft performance.

Assessment

Under BEK nr. 154/2026 and Byggeriets Uddannelser' current guidance, the H5 svendeprøve has a case-based theoretical part with a 30-minute oral examination and a 50-hour practical production part. The practical basis is 50% fixed and 50% derived from the candidate's case or selected special-subject work; both parts must be passed.

Time Limit

The case material is submitted no later than 15 days after the final school period begins. The oral examination is 30 minutes including deliberation, and the practical production time is 50 hours.

Passing Score

A minimum grade of 02 on the Danish 7-point scale (7-trinsskalaen) in both the fagteoretiske prøve (theory project) and the praktiske prøve (practical execution).

Exam Fee

No candidate-paid fee identified. Byggeriets Uddannelser lists 2026 company charges of DKK 1,225 for DI/Kooperationen members, DKK 0 for members of DI's masonry section, and DKK 3,340 for unorganized companies. (Approved vocational schools and Det Faglige Fællesudvalg for Murer-, Stenhugger- og Stukkatørfaget / Byggeriets Uddannelser)

Murersvendeprøven Exam Content Outline

25 questions

Brick Bonds & Setting-Out Geometry

Danish brick modules (228×108×54 mm), krydsforbandt, munkeforbandt, half and three-quarter bats, and wall layout.

20 questions

Mortar Chemistry & Binder Ratios

Hydraulic lime, cement-lime mortars (KC 50/50/700, KC 35/65/650), sand grading, curing, and joint finishing.

20 questions

Cavity Wall Physics & Moisture Barrier

Damp-proof courses (DPC), weep holes, wall ties per m², insulation placement, and thermal bridge avoidance under BR18.

15 questions

Arches, Corbelling & Structural Elements

Flat arches (stik), segmental arches, skewbacks, timber formwork, corbels, and lintel bearing lengths.

10 questions

Wet-Room Waterproofing & Tiling

Liquid waterproofing membranes, floor slopes (min 1:100), drain connections, flexible tile adhesives, and SBi 252.

10 questions

Plastering, Rendering & Work Safety

Multi-coat rendering systems, suction control, winter masonry heating, scaffolding safety, and silica dust protection.

How to Pass the Murersvendeprøven Exam

What You Need to Know

Passing score: A minimum grade of 02 on the Danish 7-point scale (7-trinsskalaen) in both the fagteoretiske prøve (theory project) and the praktiske prøve (practical execution).
Assessment: Under BEK nr. 154/2026 and Byggeriets Uddannelser' current guidance, the H5 svendeprøve has a case-based theoretical part with a 30-minute oral examination and a 50-hour practical production part. The practical basis is 50% fixed and 50% derived from the candidate's case or selected special-subject work; both parts must be passed.
Time limit: The case material is submitted no later than 15 days after the final school period begins. The oral examination is 30 minutes including deliberation, and the practical production time is 50 hours.
Exam fee: No candidate-paid fee identified. Byggeriets Uddannelser lists 2026 company charges of DKK 1,225 for DI/Kooperationen members, DKK 0 for members of DI's masonry section, and DKK 3,340 for unorganized companies.

Keys to Passing

Work through all 100 available questions
Review every answer and explanation
Track weak areas and revisit them
Use our AI tutor for tough concepts

Murersvendeprøven Study Tips from Top Performers

1Master Danish vertical brick height calculations: Wall height = (Number of courses × 66.7 mm) - 1 joint for the top course.

2Memorize horizontal brick length calculations: Wall length = (Number of modules × 120 mm) - 1 joint (12 mm) for a masonry opening, or + 1 joint for a wall end.

3Practice reading wet-room drawings: convert specified gradients such as 1:100 to 10 mm/m and coordinate drain, membrane, thresholds and accessibility without unintended counterfall.

4Review winter masonry rules under DS/EN 1996: mortar must not freeze during mixing or placement; bricks must be dry and frost-free, with water heated when temperatures fall below +5°C.

Frequently Asked Questions

Is the Murer Svendeprøve a written multiple-choice test?

No. The official Danish journeyman test consists of a technical drawing and calculation project with an oral defense, plus a multi-day practical bricklaying and tiling test assessed by two skuemestre. This bank is an English-language MCQ study adaptation.

What are the standard Danish brick dimensions and modules?

Standard Danish bricks measure 228 mm length × 108 mm width × 54 mm height. With standard 12 mm mortar joints, this creates a 240 × 120 × 66 mm module (courses are calculated at 66.7 mm, or 15 courses per meter of wall height).

What is a 'munkeforbandt' (monk bond)?

Munkeforbandt is a traditional Danish masonry bond consisting of two stretchers followed by one header in each course, with headers in subsequent courses centered over the stretchers below.

What mortar type is most commonly used for load-bearing brickwork in Denmark?

Factory-prepared or site-mixed KC-mørtel (kalk-cement-mørtel), typically KC 50/50/700 (standard strength) or KC 35/65/650 (higher strength), providing workable plasticity and rapid initial hydraulic set.

What are the passing criteria for the Murersvendeprøve?

Candidates must achieve at least grade 02 on the 7-trinsskalaen in both the theoretical project examination and the practical masonry test to be awarded the Svendebrev.