All Practice Exams

Free Practice Questions for CT Land Surveyor

Exam-style questions and explanations by OpenExamPrep.

✓ No registration✓ No credit card
Exam pass rate: 65%
300+ Questions
100% Free
Exam Review

Key Facts: CT Land Surveyor Exam

70%

Passing Score

DCP

100 Q

Exam Questions

DCP

4 hrs

Time Limit

DCP

None

CE Per Cycle

DCP

4 yrs

Experience Required

DCP

$500

Total Fees

LicenseMap 2026

Connecticut requires passing the NCEES FS and PS exams plus a state-specific exam covering Connecticut boundary law and minimum technical standards. The state board (DCP) oversees licensing under Connecticut General Statutes Chapter 391.

Sample CT Land Surveyor Practice Questions

Try these sample questions to review concepts for the CT Land Surveyor exam. Each question includes a detailed explanation. Start the interactive quiz above for the full 300+ question experience with AI tutoring.

1What is the governing board responsible for licensing land surveyors in Connecticut?
A.Connecticut Board of Land Surveyors
B.Board of Examiners for Professional Engineers and Land Surveyors
C.Connecticut Department of Consumer Protection
D.Connecticut Association of Land Surveyors
Explanation: The Connecticut Board of Examiners for Professional Engineers and Land Surveyors, operating under the Department of Consumer Protection, is responsible for licensing and regulating land surveyors in the state. The board is located at 450 Columbus Blvd, Suite 901, Hartford, CT 06103. CALS is a professional association, not a regulatory body.
2What examinations must a candidate pass to become a licensed land surveyor in Connecticut?
A.Only the NCEES PS exam
B.The FS exam and PS exam only
C.The FS exam, PS exam, and a 2-hour Connecticut state-specific exam
D.The FS exam and Connecticut state exam only
Explanation: Connecticut requires candidates to pass three examinations: the NCEES Fundamentals of Surveying (FS) exam, the NCEES Principles and Practice of Surveying (PS) exam, and a 2-hour Connecticut-specific Jurisprudence (JP) examination. The JP exam covers Connecticut statutes, regulations, and minimum standards of practice.
3Under Connecticut regulations, what sections of the Regulations of Connecticut State Agencies (RCSA) govern minimum standards for surveys and maps?
A.Sections 20-100a-1 through 20-100a-10
B.Sections 20-300b-1 through 20-300b-20
C.Sections 20-500c-1 through 20-500c-15
D.Sections 47-200a-1 through 47-200a-20
Explanation: Sections 20-300b-1 through 20-300b-20 of the Regulations of Connecticut State Agencies (RCSA) establish the minimum standards of accuracy, content, and certification for surveys and maps in Connecticut. These regulations are administered under Title 20, Professional and Occupational Licensing, by the Department of Consumer Protection.
4How many hours of continuing education are required for Connecticut land surveyor license renewal?
A.12 hours per renewal period
B.24 hours per renewal period
C.30 hours per renewal period
D.15 hours per renewal period
Explanation: Connecticut requires licensed land surveyors to complete 24 hours of continuing education per renewal period. This ensures practitioners stay current with changes in laws, technology, and professional standards. Failure to meet CE requirements may result in license non-renewal.
5A candidate with a 4-year surveying degree in Connecticut needs how many years of total experience to qualify for licensure?
A.2 years
B.3 years
C.4 years
D.5 years
Explanation: Under Connecticut's Class 5 pathway, a candidate with a 4-year surveying degree needs 3 years of total experience, with at least 50% in land surveying divided approximately equally between office and field work. This is the most streamlined path to licensure in Connecticut.
6According to Connecticut RCSA §20-300b-2, what is a Property Survey intended to present?
A.Only the location of buildings on the property
B.The surveyor's property/boundary opinion
C.An estimate of property value
D.A topographic map of the site
Explanation: Under RCSA §20-300b-2, a Property Survey is a type of property/boundary survey that depicts the position of boundaries and presents the surveyor's property/boundary opinion. It requires preparation of a detailed field survey and shows boundaries with respect to features, improvements, and record information.
7Under Connecticut minimum standards, what is the minimum number of monuments, markers, or combination thereof required for a boundary survey?
A.Two
B.Three
C.Four
D.Five
Explanation: Per RCSA §20-300b-16, Connecticut requires a minimum of three monuments, markers, or a combination thereof on a boundary survey. Of these three, two must be within 600 feet of the boundary and each other, and every point along the boundary (except meander lines) must be within 600 feet of a monument or marker.
8In Connecticut, what is the maximum distance any point along a boundary can be from a monument or marker?
A.300 feet (90 meters)
B.500 feet (150 meters)
C.600 feet (180 meters)
D.1,000 feet (300 meters)
Explanation: Under RCSA §20-300b-16(4), every point along the boundary, with the exception of meander lines, shall be within 600 feet (180 meters) of a monument or marker. This ensures adequate control and the ability to retrace the survey in the future.
9What class of accuracy standard applies to boundary line surveys in Connecticut?
A.Class A-1
B.Class A-2
C.Class T-2
D.Class B-1
Explanation: The standard of accuracy for boundary line surveys in Connecticut is Class A-2, as defined in the Regulations of Connecticut State Agencies, Sections 20-300b-1 through 20-300b-20. This class establishes the precision requirements for horizontal measurements in boundary determination.
10What accuracy standard class applies to topographic surveys in Connecticut?
A.Class A-2 only
B.Class T-2 or T-3
C.Class T-1 only
D.Class B-2 or B-3
Explanation: The standard of accuracy for topographic surveys in Connecticut is either Class T-2 or T-3 as defined in the Regulations of Connecticut State Agencies, Sections 20-300b-1 through 20-300b-20. The selection depends on the specific requirements and intended use of the topographic survey.

About the CT Land Surveyor Exam

The Connecticut land surveyor state exam covers Connecticut boundary law, minimum technical standards, metes and bounds state without PLSS boundary descriptions, state board regulations under CGS Chapter 391, and professional surveying ethics and practice standards.

Exam sponsor: Connecticut DCP. The requirements and fees below concern the certification or admission exam, separate from our free practice resources.

Questions

100 questions

Time Limit

4 hours

Passing Score

70%

Exam / Certification Fees

Varies

Exam sponsor website

Reported exam pass rate: 65%. estimated first-time pass rate This describes exam candidates, not OpenExamPrep users or results from using our resources. Exam sponsor website

Fees, eligibility, and exam policies can change. Confirm them with the exam sponsor before applying or paying.

Our practice resources: topics covered

We aim to reflect publicly available exam outlines and topic information in our study resources. Coverage, format, and difficulty may differ from the actual exam, and we cannot guarantee that every detail is accurate or current. Confirm exam requirements, fees, and policies with the official exam sponsor.

25%

CT Boundary Law

Connecticut boundary determination, adverse possession, riparian rights, easements

25%

CT Standards of Practice

Minimum technical standards, plat requirements, monument standards, accuracy

20%

CT Regulations

DCP licensing, continuing education, ethics, disciplinary process

15%

Legal Descriptions

Metes and bounds, legal descriptions, deed interpretation

15%

Professional Practice

Professional liability, sealing/stamping, contracts, expert witness

Preparing for the CT Land Surveyor Exam

What You Need to Know

  • Passing score: 70%
  • Exam length: 100 questions
  • Time limit: 4 hours
  • Exam / certification fees: Varies Official sources

Using Our Practice Resources

  • Work through all 300 available questions
  • Review every answer and explanation
  • Track weak areas and revisit them
  • Use our AI tutor for tough concepts

CT Land Surveyor: Suggested Study Strategy

1Master Connecticut boundary law principles under CGS Chapter 391
2Study Connecticut minimum technical standards for surveys
3Know the DCP licensing requirements and disciplinary procedures
4Understand metes and bounds state without PLSS boundary description methods
5Review Connecticut professional practice and ethics standards

Frequently Asked Questions

What does the Connecticut land surveyor state exam cover?

The CT state exam covers Connecticut boundary law under CGS Chapter 391, minimum technical standards, state licensing regulations, and professional practice standards specific to Connecticut.

How many questions are on the Connecticut land surveyor state exam?

The Connecticut state-specific land surveyor exam typically contains around 100 multiple-choice questions covering state laws, standards, and boundary principles unique to Connecticut.

What is the passing score for the Connecticut land surveyor state exam?

Connecticut requires a score of 70% or higher to pass the state-specific professional land surveyor examination.

What are Connecticut's continuing education requirements for land surveyors?

Connecticut requires professional land surveyors to complete no mandatory continuing education for license renewal, including mandatory ethics and standards of practice content.