300+ Free AL Land Surveyor Practice Questions

Pass your Alabama Professional Land Surveyor Exam exam on the first try — instant access, no signup required.

✓ No registration✓ No credit card✓ No hidden fees✓ Start practicing immediately

65% Pass Rate

300+ Questions

100% Free

1 / 300

Question 1

Score: 0/0

During a route survey, paint marks and valve boxes identified by utility owners are observed along the corridor. How should that information generally be treated?

As title evidence controlling the fee boundary

As surface evidence to be reconciled with records, designation practices, and the project scope

As a substitute for all subsurface utility engineering

As final proof of horizontal and vertical utility location

to track

Same family resources

More Land Surveyor Prep

Continue through related practice pages, study guides, comparisons, and articles from the same exam family.

Practice Pages

PS Principles and Practice of Surveying Practice200 questions Arizona Land Surveyor Practice300 questions Arkansas Land Surveyor Practice300 questions California Land Surveyor Practice300 questions Colorado Land Surveyor Practice300 questions Connecticut Land Surveyor Practice300 questions

Free Land Surveyor Practice Test by State 2026: 4,300+ Questions24 min read PS Surveying Exam Guide 2026: Boundary Law, Standards, and Practice5 min read

2026 Statistics

Key Facts: AL Land Surveyor Exam

70%

Passing Score

BELS

100 Q

Exam Questions

BELS

4 hrs

Time Limit

BELS

15 PDH

CE Per Cycle

BELS

4 yrs

Experience Required

BELS

$1,000

Total Fees

LicenseMap 2026

Alabama requires passing the NCEES FS and PS exams plus a state-specific exam covering Alabama boundary law and minimum technical standards. The state board (BELS) oversees licensing under Code of Alabama Title 34.

Sample AL Land Surveyor Practice Questions

Try these sample questions to test your AL Land Surveyor exam readiness. Each question includes a detailed explanation. Start the interactive quiz above for the full 300+ question experience with AI tutoring.

1Which state agency regulates professional land surveyors in Alabama?

A.Alabama Board of Licensure for Professional Engineers and Land Surveyors

B.Alabama Department of Commerce

C.Alabama Real Estate Commission

D.Alabama Board of Professional Geologists

Explanation: The Alabama Board of Licensure for Professional Engineers and Land Surveyors (BELS) regulates the practice of land surveying in Alabama under Code of Alabama Title 34, Chapter 11. The board handles licensing, examinations, and disciplinary actions for professional surveyors in the state.

2What three examinations must an applicant pass to become a licensed Professional Land Surveyor in Alabama?

A.FS, PS, and ALSS

B.FS, PE, and ALSS

C.FE, PS, and ALSS

D.FS, PS, and FE

Explanation: Alabama requires candidates to pass the Fundamentals of Surveying (FS), the Principles and Practice of Surveying (PS), and the Alabama Land Surveying Standards, History, and Law (ALSS) examination. The ALSS is the state-specific exam that tests knowledge of Alabama's surveying laws and standards of practice.

3Under the Alabama Standards of Practice effective January 1, 2025, what is the minimum length requirement for a typical boundary monument?

A.12 inches

B.18 inches

C.24 inches

D.36 inches

Explanation: According to Rule 1.03 of the Alabama Standards of Practice for Surveying (effective January 1, 2025), a typical boundary monument or witness monument shall have a minimal length of 18 inches. The monument must also be composed of durable material and have a minimum diameter of 1/2 inch.

4What is the minimum diameter required for a boundary monument set under Alabama's Standards of Practice?

A.1/4 inch

B.3/8 inch

C.1/2 inch

D.3/4 inch

Explanation: The Alabama Standards of Practice specify that a typical boundary monument shall have a minimum diameter of 1/2 inch, with number 4 rebar being acceptable. The monument must also be identified with a durable marker or cap bearing the Alabama License Number of the land surveyor or the company Certificate of Authorization Number.

5What must be placed on a boundary monument cap in Alabama to identify the surveyor?

A.The surveyor's Social Security number

B.The surveyor's Alabama License Number or company Certificate of Authorization Number

C.The surveyor's firm name only

D.The date of the survey only

Explanation: Under Alabama Standards of Practice, each monument set must be identified with a durable marker or cap bearing the Alabama License Number of the land surveyor or the company Certificate of Authorization Number. This ensures traceability and accountability for all monuments placed during a survey.

6Under Alabama Code Section 34-11-1, which activity is specifically excluded from the practice of engineering?

A.Designing structural components

B.Performing environmental assessments

C.Surveying of real property for the establishment of property lines or land boundaries

D.Designing electrical systems

Explanation: Alabama Code Section 34-11-1 specifically states that all engineering surveys shall exclude the surveying of real property for the establishment of any property line or land boundaries, setting of corners or monuments. This establishes a clear boundary between engineering and land surveying practice.

7What certification statement must appear on each Alabama map of survey according to the Standards of Practice?

A.'This survey was performed by a licensed surveyor'

B.'I hereby certify that all parts of this map of survey have been completed in accordance with the current requirements of the Standards of Practice for Surveying in the State of Alabama'

C.'This map meets ALTA/NSPS standards'

D.'Surveyed in accordance with federal guidelines'

Explanation: The Alabama Standards of Practice require a specific certification statement on each map of survey: 'I hereby certify (or state) that all parts of this map of survey have been completed in accordance with the current requirements of the Standards of Practice for Surveying in the State of Alabama to the best of my knowledge, information, and belief.' This must be followed by the surveyor's signature, license number, and date.

8What is the minimum size for any map of survey in Alabama?

A.5 x 7 inches

B.8-1/2 x 11 inches

C.11 x 17 inches

D.18 x 24 inches

Explanation: Under the Alabama Standards of Practice, no map of survey shall have dimensions of less than 8-1/2 x 11 inches. Maps must be legibly drawn and capable of being plotted or reproduced at the stated scale.

9What note is required on an Alabama map of survey when a property boundary survey was NOT performed?

A.'PRELIMINARY SURVEY ONLY'

B.'NOT FOR CONSTRUCTION'

C.'THIS IS NOT A PROPERTY BOUNDARY SURVEY'

D.'UNOFFICIAL MAP - DO NOT RECORD'

Explanation: Alabama Standards of Practice require that any map of survey showing property lines where a property boundary survey was not performed must include the note: 'THIS IS NOT A PROPERTY BOUNDARY SURVEY.' This protects the public from relying on non-boundary survey data for boundary-related decisions.

10Under what title and chapter of the Code of Alabama is the practice of land surveying regulated?

A.Title 34, Chapter 11

B.Title 34, Chapter 27

C.Title 40, Chapter 11

D.Title 34, Chapter 14

Explanation: The practice of land surveying in Alabama is regulated under Title 34, Chapter 11 of the Code of Alabama. This chapter covers professional engineers and land surveyors, establishing the Board of Licensure, licensing requirements, examinations, and professional conduct standards.

About the AL Land Surveyor Exam

The Alabama land surveyor state exam covers Alabama boundary law, minimum technical standards, Huntsville and St. Stephens meridians PLSS procedures, state board regulations under Title 34, Chapter 11, and professional surveying ethics and practice standards.

Questions

100 scored questions

Time Limit

4 hours

Passing Score

70%

Exam Fee

Varies (Alabama BELS)

AL Land Surveyor Exam Content Outline

25%

AL Boundary Law

Alabama boundary determination, adverse possession, riparian rights, easements

25%

AL Standards of Practice

Minimum technical standards, plat requirements, monument standards, accuracy

20%

AL Regulations

BELS licensing, continuing education, ethics, disciplinary process

15%

Legal Descriptions

Metes and bounds, PLSS, legal descriptions, deed interpretation

15%

Professional Practice

Professional liability, sealing/stamping, contracts, expert witness

How to Pass the AL Land Surveyor Exam

What You Need to Know

Passing score: 70%
Exam length: 100 questions
Time limit: 4 hours
Exam fee: Varies

Keys to Passing

Complete 500+ practice questions
Score 80%+ consistently before scheduling
Focus on highest-weighted sections
Use our AI tutor for tough concepts

AL Land Surveyor Study Tips from Top Performers

1Master Alabama boundary law principles under Title 34, Chapter 11

2Study Alabama minimum technical standards for surveys

3Know the BELS licensing requirements and disciplinary procedures

4Understand PLSS procedures for the Huntsville and St. Stephens meridians

5Review Alabama professional practice and ethics standards

Frequently Asked Questions

What does the Alabama land surveyor state exam cover?

The AL state exam covers Alabama boundary law under Title 34, Chapter 11, minimum technical standards, PLSS procedures, state licensing regulations, and professional practice standards specific to Alabama.

How many questions are on the Alabama land surveyor state exam?

The Alabama state-specific land surveyor exam typically contains around 100 multiple-choice questions covering state laws, standards, and boundary principles unique to Alabama.

What is the passing score for the Alabama land surveyor state exam?

Alabama requires a score of 70% or higher to pass the state-specific professional land surveyor examination.

What are Alabama's continuing education requirements for land surveyors?

Alabama requires professional land surveyors to complete 15 professional development hours each renewal cycle, including mandatory ethics and standards of practice content.